[PATCH 17/18] ARM: S5PV210: Add 'clock source gate' clock definitions

[Ben Dooks]

On Mon, May 17, 2010 at 09:39:05AM +0900, Kukjin Kim wrote:
> From: Thomas Abraham <thomas.ab at samsung.com>
> 
> The non-glitch-free clock muxes can suffer from glitches when changing
> clock sources. It is recommended to disable the output of non-glitch-
> free muxes before trying to change the clock source. After clock change
> is complete, the non-glitch-free clock can be re-enabled.
> 
> These clocks are added to the list of clocks to be enabled at boot time.
> Device drivers that need to disable the non-glitch-free mux output clock
> can 'clk_get' these clocks, disable them, change the clock selection
> of the mux and then re-enable the non-glitch-free mux output.

Hmm, this is something we may have to get into the clock layer itself
and keep away from the drivers involved. Can these clocks be hard connected
to their sources?

At least putting some form of comment in with the clock addition to note
that there is this problem would be useful.

> Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> ---
>  arch/arm/mach-s5pv210/clock.c |  140 +++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 140 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
> index 154bca4..a2c3ab5 100644
> --- a/arch/arm/mach-s5pv210/clock.c
> +++ b/arch/arm/mach-s5pv210/clock.c
> @@ -183,6 +183,11 @@ static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
>  	return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
>  }
>  
> +static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
> +{
> +	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
> +}
> +
>  static struct clk clk_sclk_hdmi27m = {
>  	.name		= "sclk_hdmi27m",
>  	.id		= -1,
> @@ -448,6 +453,141 @@ static struct clk init_clocks[] = {
>  		.parent		= &clk_pclk_psys.clk,
>  		.enable		= s5pv210_clk_ip3_ctrl,
>  		.ctrlbit	= (1<<10),
> +	}, {
> +		.name		= "mout_hdmi",
> +		.id		= -1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 0),
> +	}, {
> +		.name		= "mout_mixer",
> +		.id		= -1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 1),
> +	}, {
> +		.name		= "mout_dac",
> +		.id		= -1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 2),
> +	}, {
> +		.name		= "mout_cam",
> +		.id		= 0,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 3),
> +	}, {
> +		.name		= "mout_cam",
> +		.id		= 1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 4),
> +	}, {
> +		.name		= "mout_fimd",
> +		.id		= -1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 5),
> +	}, {
> +		.name		= "mout_csis",
> +		.id		= -1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 6),
> +	}, {
> +		.name		= "mout_finvpll",
> +		.id		= -1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 7),
> +	}, {
> +		.name		= "mout_mmc",
> +		.id		= 0,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 8),
> +	}, {
> +		.name		= "mout_mmc",
> +		.id		= 1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 9),
> +	}, {
> +		.name		= "mout_mmc",
> +		.id		= 2,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 10),
> +	}, {
> +		.name		= "mout_mmc",
> +		.id		= 3,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 11),
> +	}, {
> +		.name		= "mout_uart",
> +		.id		= 0,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 12),
> +	}, {
> +		.name		= "mout_uart",
> +		.id		= 1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 13),
> +	}, {
> +		.name		= "mout_uart",
> +		.id		= 2,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 14),
> +	}, {
> +		.name		= "mout_uart",
> +		.id		= 3,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 15),
> +	}, {
> +		.name		= "mout_spi",
> +		.id		= 0,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 16),
> +	}, {
> +		.name		= "mout_spi",
> +		.id		= 1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 17),
> +	}, {
> +		.name		= "mout_pwm",
> +		.id		= -1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 19),
> +	}, {
> +		.name		= "mout_audio",
> +		.id		= 0,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 24),
> +	}, {
> +		.name		= "mout_audio",
> +		.id		= 1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 25),
> +	}, {
> +		.name		= "mout_audio",
> +		.id		= 2,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 26),
> +	}, {
> +		.name		= "mout_spdif",
> +		.id		= -1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 27),
> +	}, {
> +		.name		= "mout_pwi",
> +		.id		= -1,
> +		.enable		= s5pv210_clk_mask0_ctrl,
> +		.ctrlbit	= (1 << 29),
> +	}, {
> +		.name		= "mout_fimc",
> +		.id		= 0,
> +		.enable		= s5pv210_clk_mask1_ctrl,
> +		.ctrlbit	= (1 << 2),
> +	}, {
> +		.name		= "mout_fimc",
> +		.id		= 1,
> +		.enable		= s5pv210_clk_mask1_ctrl,
> +		.ctrlbit	= (1 << 3),
> +	}, {
> +		.name		= "mout_fimc",
> +		.id		= 2,
> +		.enable		= s5pv210_clk_mask1_ctrl,
> +		.ctrlbit	= (1 << 4),
>  	},
>  };
>  
> -- 
> 1.6.2.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.