[PATCH 7/8] pxa/income: Add Income SBC support

Daniel Mack daniel at caiaq.de
Mon May 24 07:01:56 EDT 2010


On Sat, May 22, 2010 at 12:29:39AM +0200, Marek Vasut wrote:
> This is support for custom design based on Toradex Colibri PXA270 CPU card.
> Initial patch was by Pavel Revak.
> 
> [daniel - rebased the code to follow the module/board split]
> 
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> ---
>  MAINTAINERS                               |    7 +
>  arch/arm/mach-pxa/Kconfig                 |    7 +
>  arch/arm/mach-pxa/Makefile                |    1 +
>  arch/arm/mach-pxa/colibri-pxa270-income.c |  272 +++++++++++++++++++++++++++++
>  arch/arm/mach-pxa/colibri-pxa270.c        |   29 +++-
>  arch/arm/mach-pxa/include/mach/colibri.h  |    7 +
>  6 files changed, 320 insertions(+), 3 deletions(-)
>  create mode 100644 arch/arm/mach-pxa/colibri-pxa270-income.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index aa02bf2..38e760c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -696,6 +696,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
>  F:	arch/arm/mach-sa1100/jornada720.c
>  F:	arch/arm/mach-sa1100/include/mach/jornada720.h
>  
> +ARM/INCOME PXA270 SUPPORT
> +M:	Marek Vasut <marek.vasut at gmail.com>
> +L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
> +S:	Maintained
> +F:	arch/arm/mach-pxa/income.c
> +F:	arch/arm/mach-pxa/include/mach-pxa/income.h
> +
>  ARM/INTEL IOP32X ARM ARCHITECTURE
>  M:	Lennert Buytenhek <kernel at wantstofly.org>
>  M:	Dan Williams <dan.j.williams at intel.com>
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index 819b44f..2ff0b32 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -242,6 +242,13 @@ config MACH_COLIBRI_PXA270_EVALBOARD
>  	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
>  	depends on MACH_COLIBRI
>  
> +config MACH_COLIBRI_PXA270_INCOME
> +	bool "Income s.r.o. PXA270 SBC"
> +	depends on MACH_COLIBRI
> +	select PXA27x
> +	select HAVE_PWM
> +	select PXA_HAVE_BOARD_IRQS

Hmm, now that we depend on MACH_COLIBRI, I think these auto-selects can
go away as MACH_COLIBRI already cares for them, right?

Daniel



More information about the linux-arm-kernel mailing list