[PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir
Marek Szyprowski
m.szyprowski at samsung.com
Tue May 18 06:23:36 EDT 2010
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.
Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
arch/arm/plat-s5p/Kconfig | 1 +
arch/arm/plat-s5pc1xx/Kconfig | 2 +-
arch/arm/plat-s5pc1xx/Makefile | 1 -
arch/arm/plat-s5pc1xx/gpio-config.c | 62 --------------------
.../plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h | 32 ----------
arch/arm/plat-s5pc1xx/setup-fb-24bpp.c | 1 -
arch/arm/plat-samsung/Kconfig | 12 ++--
arch/arm/plat-samsung/gpio-config.c | 48 +++++++++++++++
arch/arm/plat-samsung/include/plat/gpio-cfg.h | 30 ++++++++++
9 files changed, 86 insertions(+), 103 deletions(-)
delete mode 100644 arch/arm/plat-s5pc1xx/gpio-config.c
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index d400a6a..92bd756 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -13,6 +13,7 @@ config PLAT_S5P
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
+ select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
select S3C_GPIO_CFG_S3C64XX
select S3C_GPIO_PULL_UPDOWN
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index c7ccdf2..79d3be7 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -16,9 +16,9 @@ config PLAT_S5PC1XX
select SAMSUNG_IRQ_VIC_TIMER
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
+ select S5P_GPIO_DRVSTR
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
- select S5P_GPIO_CFG_S5PC1XX
help
Base platform code for any Samsung S5PC1XX device
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index 278f268..66a8f3e 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
# Device setup
-obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
deleted file mode 100644
index a4f67e8..0000000
--- a/arch/arm/plat-s5pc1xx/gpio-config.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * S5PC1XX GPIO Configuration.
- *
- * Based on plat-s3c64xx/gpio-config.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 drvstr;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- drvstr = __raw_readl(reg);
- drvstr = 0xffff & (0x3 << shift);
- drvstr = drvstr >> shift;
-
- return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 tmp;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- tmp = __raw_readl(reg);
- tmp |= drvstr << shift;
-
- __raw_writel(tmp, reg);
-
- return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
deleted file mode 100644
index 72ad59f..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
- *
- * Copyright 2009 Samsung Electronic
- *
- * S5PC1XX Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-#ifndef __GPIO_CFG_S5PC1XX_H
-#define __GPIO_CFG_S5PC1XX_H __FILE__
-
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-#define S5P_GPIO_DRVSTR_LV1 0x00
-#define S5P_GPIO_DRVSTR_LV2 0x01
-#define S5P_GPIO_DRVSTR_LV3 0x10
-#define S5P_GPIO_DRVSTR_LV4 0x11
-
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
-
-extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr);
-
-#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
index 1a63768..b02c36f 100644
--- a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -19,7 +19,6 @@
#include <mach/map.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
#define DISR_OFFSET 0x7008
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 287e6f7..6ccfd60 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -90,12 +90,6 @@ config S3C_GPIO_CFG_S3C64XX
Internal configuration to enable S3C64XX style GPIO configuration
functions.
-config S5P_GPIO_CFG_S5PC1XX
- bool
- help
- Internal configuration to enable S5PC1XX style GPIO configuration
- functions.
-
config S3C_GPIO_PULL_UPDOWN
bool
help
@@ -111,6 +105,12 @@ config S3C_GPIO_PULL_UP
help
Internal configuration to enable the correct GPIO pull helper
+config S5P_GPIO_DRVSTR
+ bool
+ help
+ Internal configuration to get and set correct GPIO driver strength
+ helper
+
config SAMSUNG_GPIO_EXTRA
int "Number of additional GPIO pins"
default 0
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index 3282db3..d0e67a2 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -261,3 +261,51 @@ s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 drvstr;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ drvstr = __raw_readl(reg);
+ drvstr = 0xffff & (0x3 << shift);
+ drvstr = drvstr >> shift;
+
+ return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 tmp;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ tmp = __raw_readl(reg);
+ tmp |= drvstr << shift;
+
+ __raw_writel(tmp, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif /* CONFIG_S5P_GPIO_DRVSTR */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 8d01e85..34efdd2 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -25,6 +25,7 @@
#define __PLAT_GPIO_CFG_H __FILE__
typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
/* forward declaration if gpio-core.h hasn't been included */
struct s3c_gpio_chip;
@@ -118,4 +119,33 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
*/
extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+/* Define values for the drvstr available for each gpio pin.
+ *
+ * These values control the value of the output signal driver strength,
+ * configurable on most pins on the S5C series.
+ */
+#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00)
+#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01)
+#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10)
+#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11)
+
+/**
+ * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the driver streght value for the specified pin.
+*/
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
+
+/**
+ * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
+ * @pin: The pin number to configure the driver streght value
+ * @drvstr: The new value of the driver strength
+ *
+ * This function sets the driver strength value for the specified pin.
+ * It will return 0 if successfull, or a negative error code if the pin
+ * cannot support the requested setting.
+*/
+extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+
#endif /* __PLAT_GPIO_CFG_H */
--
1.6.4
More information about the linux-arm-kernel
mailing list