[PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir

Ben Dooks ben-linux at fluff.org
Tue May 18 22:18:53 EDT 2010


On Tue, May 18, 2010 at 12:23:36PM +0200, Marek Szyprowski wrote:
> Driver strength parameter can be changed not only on S5PC100 but also
> on S5PV210/S5PC110 platforms, so move the helper functions to the common
> plat-samsung directory.

ok, will merge onto for-2635-2/s5p-core
 
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
>  arch/arm/plat-s5p/Kconfig                          |    1 +
>  arch/arm/plat-s5pc1xx/Kconfig                      |    2 +-
>  arch/arm/plat-s5pc1xx/Makefile                     |    1 -
>  arch/arm/plat-s5pc1xx/gpio-config.c                |   62 --------------------
>  .../plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h   |   32 ----------
>  arch/arm/plat-s5pc1xx/setup-fb-24bpp.c             |    1 -
>  arch/arm/plat-samsung/Kconfig                      |   12 ++--
>  arch/arm/plat-samsung/gpio-config.c                |   48 +++++++++++++++
>  arch/arm/plat-samsung/include/plat/gpio-cfg.h      |   30 ++++++++++
>  9 files changed, 86 insertions(+), 103 deletions(-)
>  delete mode 100644 arch/arm/plat-s5pc1xx/gpio-config.c
>  delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
> 
> diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
> index d400a6a..92bd756 100644
> --- a/arch/arm/plat-s5p/Kconfig
> +++ b/arch/arm/plat-s5p/Kconfig
> @@ -13,6 +13,7 @@ config PLAT_S5P
>  	select NO_IOPORT
>  	select ARCH_REQUIRE_GPIOLIB
>  	select S3C_GPIO_TRACK
> +	select S5P_GPIO_DRVSTR
>  	select SAMSUNG_GPIOLIB_4BIT
>  	select S3C_GPIO_CFG_S3C64XX
>  	select S3C_GPIO_PULL_UPDOWN
> diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
> index c7ccdf2..79d3be7 100644
> --- a/arch/arm/plat-s5pc1xx/Kconfig
> +++ b/arch/arm/plat-s5pc1xx/Kconfig
> @@ -16,9 +16,9 @@ config PLAT_S5PC1XX
>  	select SAMSUNG_IRQ_VIC_TIMER
>  	select S3C_GPIO_TRACK
>  	select S3C_GPIO_PULL_UPDOWN
> +	select S5P_GPIO_DRVSTR
>  	select S3C_GPIO_CFG_S3C24XX
>  	select S3C_GPIO_CFG_S3C64XX
> -	select S5P_GPIO_CFG_S5PC1XX
>  	help
>  	  Base platform code for any Samsung S5PC1XX device
>  
> diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
> index 278f268..66a8f3e 100644
> --- a/arch/arm/plat-s5pc1xx/Makefile
> +++ b/arch/arm/plat-s5pc1xx/Makefile
> @@ -24,7 +24,6 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
>  
>  # Device setup
>  
> -obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
>  obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
>  obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
>  obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
> diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
> deleted file mode 100644
> index a4f67e8..0000000
> --- a/arch/arm/plat-s5pc1xx/gpio-config.c
> +++ /dev/null
> @@ -1,62 +0,0 @@
> -/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
> - *
> - * Copyright 2009 Samsung Electronics
> - *
> - * S5PC1XX GPIO Configuration.
> - *
> - * Based on plat-s3c64xx/gpio-config.c
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/gpio.h>
> -#include <linux/io.h>
> -
> -#include <plat/gpio-core.h>
> -#include <plat/gpio-cfg-s5pc1xx.h>
> -
> -s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
> -{
> -	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
> -	void __iomem *reg;
> -	int shift = off * 2;
> -	u32 drvstr;
> -
> -	if (!chip)
> -		return -EINVAL;
> -
> -	reg = chip->base + 0x0C;
> -
> -	drvstr = __raw_readl(reg);
> -	drvstr = 0xffff & (0x3 << shift);
> -	drvstr = drvstr >> shift;
> -
> -	return (__force s5p_gpio_drvstr_t)drvstr;
> -}
> -EXPORT_SYMBOL(s5p_gpio_get_drvstr);
> -
> -int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
> -			s5p_gpio_drvstr_t drvstr)
> -{
> -	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
> -	void __iomem *reg;
> -	int shift = off * 2;
> -	u32 tmp;
> -
> -	if (!chip)
> -		return -EINVAL;
> -
> -	reg = chip->base + 0x0C;
> -
> -	tmp = __raw_readl(reg);
> -	tmp |= drvstr << shift;
> -
> -	__raw_writel(tmp, reg);
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(s5p_gpio_set_drvstr);
> diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
> deleted file mode 100644
> index 72ad59f..0000000
> --- a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
> - *
> - * Copyright 2009 Samsung Electronic
> - *
> - * S5PC1XX Platform - GPIO pin configuration
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -/* This file contains the necessary definitions to get the basic gpio
> - * pin configuration done such as setting a pin to input or output or
> - * changing the pull-{up,down} configurations.
> - */
> -
> -#ifndef __GPIO_CFG_S5PC1XX_H
> -#define __GPIO_CFG_S5PC1XX_H __FILE__
> -
> -typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
> -
> -#define S5P_GPIO_DRVSTR_LV1	0x00
> -#define S5P_GPIO_DRVSTR_LV2	0x01
> -#define S5P_GPIO_DRVSTR_LV3	0x10
> -#define S5P_GPIO_DRVSTR_LV4	0x11
> -
> -extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
> -
> -extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
> -			s5p_gpio_drvstr_t drvstr);
> -
> -#endif /* __GPIO_CFG_S5PC1XX_H */
> diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
> index 1a63768..b02c36f 100644
> --- a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
> +++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
> @@ -19,7 +19,6 @@
>  #include <mach/map.h>
>  #include <plat/fb.h>
>  #include <plat/gpio-cfg.h>
> -#include <plat/gpio-cfg-s5pc1xx.h>
>  
>  #define DISR_OFFSET	0x7008
>  
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 287e6f7..6ccfd60 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -90,12 +90,6 @@ config S3C_GPIO_CFG_S3C64XX
>  	  Internal configuration to enable S3C64XX style GPIO configuration
>  	  functions.
>  
> -config S5P_GPIO_CFG_S5PC1XX
> -	bool
> -	help
> -	  Internal configuration to enable S5PC1XX style GPIO configuration
> -	  functions.
> -
>  config S3C_GPIO_PULL_UPDOWN
>  	bool
>  	help
> @@ -111,6 +105,12 @@ config S3C_GPIO_PULL_UP
>  	help
>  	  Internal configuration to enable the correct GPIO pull helper
>  
> +config S5P_GPIO_DRVSTR
> +	bool
> +	help
> +	  Internal configuration to get and set correct GPIO driver strength
> +	  helper
> +
>  config SAMSUNG_GPIO_EXTRA
>  	int "Number of additional GPIO pins"
>  	default 0
> diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
> index 3282db3..d0e67a2 100644
> --- a/arch/arm/plat-samsung/gpio-config.c
> +++ b/arch/arm/plat-samsung/gpio-config.c
> @@ -261,3 +261,51 @@ s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
>  }
>  #endif /* CONFIG_S3C_GPIO_PULL_UP */
>  
> +#ifdef CONFIG_S5P_GPIO_DRVSTR
> +s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
> +{
> +	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
> +	unsigned int off;
> +	void __iomem *reg;
> +	int shift;
> +	u32 drvstr;
> +
> +	if (!chip)
> +		return -EINVAL;
> +
> +	off = chip->chip.base - pin;
> +	shift = off * 2;
> +	reg = chip->base + 0x0C;
> +
> +	drvstr = __raw_readl(reg);
> +	drvstr = 0xffff & (0x3 << shift);
> +	drvstr = drvstr >> shift;
> +
> +	return (__force s5p_gpio_drvstr_t)drvstr;
> +}
> +EXPORT_SYMBOL(s5p_gpio_get_drvstr);
> +
> +int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
> +{
> +	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
> +	unsigned int off;
> +	void __iomem *reg;
> +	int shift;
> +	u32 tmp;
> +
> +	if (!chip)
> +		return -EINVAL;
> +
> +	off = chip->chip.base - pin;
> +	shift = off * 2;
> +	reg = chip->base + 0x0C;
> +
> +	tmp = __raw_readl(reg);
> +	tmp |= drvstr << shift;
> +
> +	__raw_writel(tmp, reg);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(s5p_gpio_set_drvstr);
> +#endif	/* CONFIG_S5P_GPIO_DRVSTR */

I'm going to merge this, however I may end up adding some locking from
the gpio updates that are in the current pendign tree.

> diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
> index 8d01e85..34efdd2 100644
> --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
> +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
> @@ -25,6 +25,7 @@
>  #define __PLAT_GPIO_CFG_H __FILE__
>  
>  typedef unsigned int __bitwise__ s3c_gpio_pull_t;
> +typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
>  
>  /* forward declaration if gpio-core.h hasn't been included */
>  struct s3c_gpio_chip;
> @@ -118,4 +119,33 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
>  */
>  extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
>  
> +/* Define values for the drvstr available for each gpio pin.
> + *
> + * These values control the value of the output signal driver strength,
> + * configurable on most pins on the S5C series.
> + */
> +#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x00)
> +#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x01)
> +#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x10)
> +#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x11)
> +
> +/**
> + * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
> + * @pin: The pin number to get the settings for
> + *
> + * Read the driver streght value for the specified pin.
> +*/
> +extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
> +
> +/**
> + * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
> + * @pin: The pin number to configure the driver streght value
> + * @drvstr: The new value of the driver strength
> + *
> + * This function sets the driver strength value for the specified pin.
> + * It will return 0 if successfull, or a negative error code if the pin
> + * cannot support the requested setting.
> +*/
> +extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
> +
>  #endif /* __PLAT_GPIO_CFG_H */
> -- 
> 1.6.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.




More information about the linux-arm-kernel mailing list