[PATCH 2/8] pxa/colibri270: Add MMC support

Eric Miao eric.y.miao at gmail.com
Wed May 26 09:55:57 EDT 2010


On Sat, May 22, 2010 at 6:29 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>

Applied.

> ---
>  arch/arm/mach-pxa/colibri-pxa270.c       |   31 ++++++++++++++++++++++++++++++
>  arch/arm/mach-pxa/include/mach/colibri.h |    1 +
>  2 files changed, 32 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
> index 4519e89..5490c5f 100644
> --- a/arch/arm/mach-pxa/colibri-pxa270.c
> +++ b/arch/arm/mach-pxa/colibri-pxa270.c
> @@ -33,6 +33,7 @@
>
>  #include <mach/pxa27x.h>
>  #include <mach/colibri.h>
> +#include <mach/mmc.h>
>
>  #include "generic.h"
>  #include "devices.h"
> @@ -44,6 +45,15 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
>        /* Ethernet */
>        GPIO78_nCS_2,   /* Ethernet CS */
>        GPIO114_GPIO,   /* Ethernet IRQ */
> +
> +       /* MMC */
> +       GPIO32_MMC_CLK,
> +       GPIO92_MMC_DAT_0,
> +       GPIO109_MMC_DAT_1,
> +       GPIO110_MMC_DAT_2,
> +       GPIO111_MMC_DAT_3,
> +       GPIO112_MMC_CMD,
> +       GPIO0_GPIO,     /* SD detect */
>  };
>
>  /******************************************************************************
> @@ -138,6 +148,26 @@ static void __init colibri_pxa270_eth_init(void)
>  static inline void colibri_pxa270_eth_init(void) {}
>  #endif
>
> +/******************************************************************************
> + * SD/MMC card controller
> + ******************************************************************************/
> +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
> +static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
> +       .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
> +       .gpio_power             = -1,
> +       .gpio_card_detect       = GPIO0_COLIBRI_PXA270_SD_DETECT,
> +       .gpio_card_ro           = -1,
> +       .detect_delay_ms        = 200,
> +};
> +
> +static void __init colibri_pxa270_mmc_init(void)
> +{
> +       pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
> +}
> +#else
> +static inline void colibri_pxa270_mmc_init(void) {}
> +#endif
> +
>  static void __init colibri_pxa270_init(void)
>  {
>        pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
> @@ -147,6 +177,7 @@ static void __init colibri_pxa270_init(void)
>
>        colibri_pxa270_nor_init();
>        colibri_pxa270_eth_init();
> +       colibri_pxa270_mmc_init();
>  }
>
>  MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
> diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
> index 9e47e1f..c549236 100644
> --- a/arch/arm/mach-pxa/include/mach/colibri.h
> +++ b/arch/arm/mach-pxa/include/mach/colibri.h
> @@ -35,6 +35,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
>
>  /* GPIO definitions for Colibri PXA270 */
>  #define GPIO114_COLIBRI_PXA270_ETH_IRQ 114
> +#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
>
>  #endif /* _COLIBRI_H_ */
>
> --
> 1.7.0
>
>



More information about the linux-arm-kernel mailing list