[PATCH v2] ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move.

Kukjin Kim kgene.kim at samsung.com
Thu May 13 20:35:49 EDT 2010


Marek Szyprowski wrote:
> 
> Hello,
> 
> On Thursday, May 13, 2010 1:35 PM Kukjin Kim wrote:
> 
> > From: Thomas Abraham <thomas.ab at samsung.com>
> >
> > This is a pre-requisite clock patch for the plat-s5pc1xx to plat-s5p
> > movement. The patches that perform the movement of the code from
> > plat-s5pc1xx to plat-s5p (and mach-s5pc100) should also enable the
> > build for the mach-s5pc100/clock.c code.
> >
> > Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
> > Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> > ---
> >  arch/arm/mach-s5pc100/clock.c                   | 1362
> > +++++++++++++++++++++++
> >  arch/arm/mach-s5pc100/include/mach/regs-clock.h |   71 ++
> >  arch/arm/plat-s5p/clock.c                       |    2 +-
> >  arch/arm/plat-s5p/include/plat/pll.h            |   22 +
> >  arch/arm/plat-s5p/include/plat/s5p-clock.h      |    2 +
> >  5 files changed, 1459 insertions(+), 1 deletions(-)
> >  create mode 100755 arch/arm/mach-s5pc100/clock.c
> >  create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-clock.h
> >
> > diff --git a/arch/arm/mach-s5pc100/clock.c
b/arch/arm/mach-s5pc100/clock.c
> > new file mode 100755
> > index 0000000..3c9192b
> > --- /dev/null
> > +++ b/arch/arm/mach-s5pc100/clock.c
> > @@ -0,0 +1,1362 @@
> > +/* linux/arch/arm/mach-s5pc100/clock.c
> > + *
> > + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> > + *		http://www.samsung.com/
> > + *
> > + * S5PC100 - Clock support
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > +*/
> > +
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/list.h>
> > +#include <linux/err.h>
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +
> > +#include <mach/map.h>
> > +
> > +#include <plat/cpu-freq.h>
> > +#include <mach/regs-clock.h>
> > +#include <plat/clock.h>
> > +#include <plat/cpu.h>
> > +#include <plat/pll.h>
> > +#include <plat/s5p-clock.h>
> > +#include <plat/clock-clksrc.h>
> > +#include <plat/s5pc100.h>
> > +
> > +static struct clk s5p_clk_otgphy = {
> > +	.name		= "otg_phy",
> > +	.id		= -1,
> > +};
> > +
> > +static struct clk *clk_src_mout_href_list[] = {
> > +	[0] = &s5p_clk_27m,
> > +	[1] = &clk_fin_hpll,
> > +};
> > +
> > +static struct clksrc_sources clk_src_mout_href = {
> > +	.sources	= clk_src_mout_href_list,
> > +	.nr_sources	= ARRAY_SIZE(clk_src_mout_href_list),
> > +};
> > +
> > +static struct clksrc_clk clk_mout_href = {
> > +	.clk = {
> > +		.name           = "mout_href",
> > +		.id             = -1,
> > +	},
> > +	.sources        = &clk_src_mout_href,
> > +	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
> > +};
> > +
> > +static struct clk *clk_src_mout_48m_list[] = {
> > +	[0] = &s5p_clk_xusbxti,
> 
> s5p_clk_xusbxti clock is not defined anywhere.
> 
> > ...
> 

'clk_xusbxti' is right. I will re-submit.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.




More information about the linux-arm-kernel mailing list