[PATCH 01/15] ARM: Samsung: fix broken timer irq base
Kukjin Kim
kgene.kim at samsung.com
Mon May 17 07:52:51 EDT 2010
Marek Szyprowski wrote:
>
> Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
> (32-64). This was caused probably by a typo while the common interrupts
> definition was refactored. This patch moves timer interrupt range to safe
> area of 11-15 (just before uart range).
>
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
> arch/arm/plat-s5p/include/plat/irqs.h | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-
> s5p/include/plat/irqs.h
> index 42e757f..9ff3d71 100644
> --- a/arch/arm/plat-s5p/include/plat/irqs.h
> +++ b/arch/arm/plat-s5p/include/plat/irqs.h
> @@ -79,7 +79,7 @@
> #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
> #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
>
> -#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
> +#define S5P_TIMER_IRQ(x) (11 + (x))
>
> #define IRQ_TIMER0 S5P_TIMER_IRQ(0)
> #define IRQ_TIMER1 S5P_TIMER_IRQ(1)
> --
Ok, you're right.
Had to move to ISA IRQ space not VIC area for avoid conflicting.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
More information about the linux-arm-kernel
mailing list