[PATCH] [arm l2x0] Extend cache-l2x0 to support the 16-way PL310 (v3)
Jason S. McMullan
jason.mcmullan at netronome.com
Tue May 4 11:00:54 EDT 2010
The L310 cache controller's interface is almost identical
to the L210. One major difference is that the PL310 can
have up to 16 ways.
This change uses the cache's part ID and the Assciativity
bits in the AUX_CTRL register to determine the number of ways.
Also prints out the # of ways, CACHE_ID and AUX_CTRL registers.
Signed-off-by: Jason S. McMullan <jason.mcmullan at netronome.com>
---
arch/arm/include/asm/hardware/cache-l2x0.h | 3 ++
arch/arm/mm/cache-l2x0.c | 39 ++++++++++++++++++++++++---
2 files changed, 37 insertions(+), 5 deletions(-)
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index cdb9022..6bcba48 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -21,6 +21,9 @@
#define __ASM_ARM_HARDWARE_L2X0_H
#define L2X0_CACHE_ID 0x000
+#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
+#define L2X0_CACHE_ID_PART_L210 (1 << 6)
+#define L2X0_CACHE_ID_PART_L310 (3 << 6)
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100
#define L2X0_AUX_CTRL 0x104
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 21ad68b..9819869 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -27,6 +27,7 @@
static void __iomem *l2x0_base;
static DEFINE_SPINLOCK(l2x0_lock);
+static uint32_t l2x0_way_mask; /* Bitmask of active ways */
static inline void cache_wait(void __iomem *reg, unsigned long mask)
{
@@ -108,8 +109,8 @@ static inline void l2x0_inv_all(void)
/* invalidate all ways */
spin_lock_irqsave(&l2x0_lock, flags);
- writel(0xff, l2x0_base + L2X0_INV_WAY);
- cache_wait(l2x0_base + L2X0_INV_WAY, 0xff);
+ writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+ cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
cache_sync();
spin_unlock_irqrestore(&l2x0_lock, flags);
}
@@ -208,9 +209,37 @@ static void l2x0_flush_range(unsigned long start, unsigned long end)
void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
{
__u32 aux;
+ __u32 cache_id;
+ int ways;
+ const char *type;
l2x0_base = base;
+ cache_id = readl(l2x0_base + L2X0_CACHE_ID);
+ aux = readl(l2x0_base + L2X0_AUX_CTRL);
+
+ /* Determine the number of ways */
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
+ case L2X0_CACHE_ID_PART_L310:
+ if (aux & (1 << 16))
+ ways = 16;
+ else
+ ways = 8;
+ type = "L310";
+ break;
+ case L2X0_CACHE_ID_PART_L210:
+ ways = (aux >> 13) & 0xf;
+ type = "L210";
+ break;
+ default:
+ /* Assume unknown chips have 8 ways */
+ ways = 8;
+ type = "L2x0 series";
+ break;
+ }
+
+ l2x0_way_mask = (1 << ways) - 1;
+
/*
* Check if l2x0 controller is already enabled.
* If you are booting from non-secure mode
@@ -219,8 +248,6 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
/* l2x0 controller is disabled */
-
- aux = readl(l2x0_base + L2X0_AUX_CTRL);
aux &= aux_mask;
aux |= aux_val;
writel(aux, l2x0_base + L2X0_AUX_CTRL);
@@ -236,5 +263,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
outer_cache.flush_range = l2x0_flush_range;
outer_cache.sync = l2x0_cache_sync;
- printk(KERN_INFO "L2X0 cache controller enabled\n");
+ printk(KERN_INFO "%s cache controller enabled\n", type);
+ printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
+ ways, cache_id, aux);
}
--
1.7.0.4
More information about the linux-arm-kernel
mailing list