[PATCH 1/4] ARM: Gemini: add support for Wiligear WBD-111

Imre Kaloz kaloz at openwrt.org
Mon May 10 16:57:05 EDT 2010


Signed-off-by: Imre Kaloz <kaloz at openwrt.org>

On Mon, 10 May 2010 22:06:58 +0200, Hans Ulli Kroll <ulli.kroll at googlemail.com> wrote:

> From: Imre Kaloz <kaloz at openwrt.org>
>
> Signed-off-by: Hans Ulli Kroll <ulli.kroll at googlemail.com>
> ---
>  arch/arm/mach-gemini/Kconfig        |    7 ++
>  arch/arm/mach-gemini/Makefile       |    1 +
>  arch/arm/mach-gemini/board-wbd111.c |  143 +++++++++++++++++++++++++++++++++++
>  3 files changed, 151 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-gemini/board-wbd111.c
>
> diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
> index 515b75c..4de67ce 100644
> --- a/arch/arm/mach-gemini/Kconfig
> +++ b/arch/arm/mach-gemini/Kconfig
> @@ -9,6 +9,13 @@ config MACH_RUT100
>  	  Say Y here if you intend to run this kernel on a
>  	  Teltonika 3G Router RUT100.
>+config MACH_WBD111
> +	bool "Wiliboard WBD-111"
> +	select GEMINI_MEM_SWAP
> +	help
> +	  Say Y here if you intend to run this kernel on a
> +	  Wiliboard WBD-111.
> +
>  endmenu
> config GEMINI_MEM_SWAP
> diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
> index 719505b..3997487 100644
> --- a/arch/arm/mach-gemini/Makefile
> +++ b/arch/arm/mach-gemini/Makefile
> @@ -8,3 +8,4 @@ obj-y			:= irq.o mm.o time.o devices.o gpio.o
> # Board-specific support
>  obj-$(CONFIG_MACH_RUT100)	+= board-rut1xx.o
> +obj-$(CONFIG_MACH_WBD111)	+= board-wbd111.o
> diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
> new file mode 100644
> index 0000000..36538c1
> --- /dev/null
> +++ b/arch/arm/mach-gemini/board-wbd111.c
> @@ -0,0 +1,143 @@
> +/*
> + *  Support for Wiliboard WBD-111
> + *
> + *  Copyright (C) 2009 Imre Kaloz <kaloz at openwrt.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/leds.h>
> +#include <linux/input.h>
> +#include <linux/skbuff.h>
> +#include <linux/gpio_keys.h>
> +#include <linux/mdio-gpio.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +
> +
> +#include "common.h"
> +
> +static struct gpio_keys_button wbd111_keys[] = {
> +	{
> +		.code		= KEY_SETUP,
> +		.gpio		= 5,
> +		.active_low	= 1,
> +		.desc		= "reset",
> +		.type		= EV_KEY,
> +	},
> +};
> +
> +static struct gpio_keys_platform_data wbd111_keys_data = {
> +	.buttons	= wbd111_keys,
> +	.nbuttons	= ARRAY_SIZE(wbd111_keys),
> +};
> +
> +static struct platform_device wbd111_keys_device = {
> +	.name	= "gpio-keys",
> +	.id	= -1,
> +	.dev	= {
> +		.platform_data = &wbd111_keys_data,
> +	},
> +};
> +
> +static struct gpio_led wbd111_leds[] = {
> +	{
> +		.name			= "L3red",
> +		.gpio			= 1,
> +	},
> +	{
> +		.name			= "L4green",
> +		.gpio			= 2,
> +	},
> +	{
> +		.name			= "L4red",
> +		.gpio			= 3,
> +	},
> +	{
> +		.name			= "L3green",
> +		.gpio			= 5,
> +	},
> +};
> +
> +static struct gpio_led_platform_data wbd111_leds_data = {
> +	.num_leds	= ARRAY_SIZE(wbd111_leds),
> +	.leds		= wbd111_leds,
> +};
> +
> +static struct platform_device wbd111_leds_device = {
> +	.name	= "leds-gpio",
> +	.id	= -1,
> +	.dev	= {
> +		.platform_data = &wbd111_leds_data,
> +	},
> +};
> +
> +static struct sys_timer wbd111_timer = {
> +	.init	= gemini_timer_init,
> +};
> +
> +#ifdef CONFIG_MTD_PARTITIONS
> +static struct mtd_partition wbd111_partitions[] = {
> +	{
> +		.name		= "RedBoot",
> +		.offset		= 0,
> +		.size		= 0x020000,
> +		.mask_flags	= MTD_WRITEABLE,
> +	} , {
> +		.name		= "kernel",
> +		.offset		= 0x020000,
> +		.size		= 0x100000,
> +	} , {
> +		.name		= "rootfs",
> +		.offset		= 0x120000,
> +		.size		= 0x6a0000,
> +	} , {
> +		.name		= "VCTL",
> +		.offset		= 0x7c0000,
> +		.size		= 0x010000,
> +		.mask_flags	= MTD_WRITEABLE,
> +	} , {
> +		.name		= "cfg",
> +		.offset		= 0x7d0000,
> +		.size		= 0x010000,
> +		.mask_flags	= MTD_WRITEABLE,
> +	} , {
> +		.name		= "FIS",
> +		.offset		= 0x7e0000,
> +		.size		= 0x010000,
> +		.mask_flags	= MTD_WRITEABLE,
> +	}
> +};
> +#define wbd111_num_partitions	ARRAY_SIZE(wbd111_partitions)
> +#else
> +#define wbd111_partitions	NULL
> +#define wbd111_num_partitions	0
> +#endif /* CONFIG_MTD_PARTITIONS */
> +
> +static void __init wbd111_init(void)
> +{
> +	gemini_gpio_init();
> +	platform_register_uart();
> +	platform_register_pflash(SZ_8M, wbd111_partitions,
> +				 wbd111_num_partitions);
> +	platform_device_register(&wbd111_leds_device);
> +	platform_device_register(&wbd111_keys_device);
> +}
> +
> +MACHINE_START(WBD111, "Wiliboard WBD-111")
> +	.phys_io	= 0x7fffc000,
> +	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
> +	.boot_params	= 0x100,
> +	.map_io		= gemini_map_io,
> +	.init_irq	= gemini_init_irq,
> +	.timer		= &wbd111_timer,
> +	.init_machine	= wbd111_init,
> +MACHINE_END




More information about the linux-arm-kernel mailing list