[PATCH v5] ARM: S5PV210: Add Ext interrupt support.
Ben Dooks
ben-linux at fluff.org
Sun May 16 22:22:09 EDT 2010
On Mon, May 17, 2010 at 10:16:56AM +0900, Kukjin Kim wrote:
> From: Jongpill Lee <boyko.lee at samsung.com>
>
> Add support for external interrupts on v210.
>
> Signed-off-by: Jongpill Lee <boyko.lee at samsung.com>
> Signed-off-by: Pannaga Bhushan <p.bhushan at samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> ---
> arch/arm/mach-s5pv210/Kconfig | 1 +
> arch/arm/mach-s5pv210/include/mach/irqs.h | 31 ++--
> arch/arm/mach-s5pv210/include/mach/regs-gpio.h | 46 +++++
> arch/arm/plat-s5p/Kconfig | 5 +
> arch/arm/plat-s5p/Makefile | 1 +
> arch/arm/plat-s5p/irq-eint.c | 216 ++++++++++++++++++++++++
> 6 files changed, 282 insertions(+), 18 deletions(-)
> create mode 100644 arch/arm/mach-s5pv210/include/mach/regs-gpio.h
> create mode 100644 arch/arm/plat-s5p/irq-eint.c
>
> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> index af33a1a..c4c2a7f 100644
> --- a/arch/arm/mach-s5pv210/Kconfig
> +++ b/arch/arm/mach-s5pv210/Kconfig
> @@ -12,6 +12,7 @@ if ARCH_S5PV210
> config CPU_S5PV210
> bool
> select PLAT_S5P
> + select S5P_EXT_INT
> help
> Enable S5PV210 CPU support
>
> diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
> index 62c5175..42b9b28 100644
> --- a/arch/arm/mach-s5pv210/include/mach/irqs.h
> +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
> @@ -17,22 +17,9 @@
>
> /* VIC0: System, DMA, Timer */
>
> -#define IRQ_EINT0 S5P_IRQ_VIC0(0)
> -#define IRQ_EINT1 S5P_IRQ_VIC0(1)
> -#define IRQ_EINT2 S5P_IRQ_VIC0(2)
> -#define IRQ_EINT3 S5P_IRQ_VIC0(3)
> -#define IRQ_EINT4 S5P_IRQ_VIC0(4)
> -#define IRQ_EINT5 S5P_IRQ_VIC0(5)
> -#define IRQ_EINT6 S5P_IRQ_VIC0(6)
> -#define IRQ_EINT7 S5P_IRQ_VIC0(7)
> -#define IRQ_EINT8 S5P_IRQ_VIC0(8)
> -#define IRQ_EINT9 S5P_IRQ_VIC0(9)
> -#define IRQ_EINT10 S5P_IRQ_VIC0(10)
> -#define IRQ_EINT11 S5P_IRQ_VIC0(11)
> -#define IRQ_EINT12 S5P_IRQ_VIC0(12)
> -#define IRQ_EINT13 S5P_IRQ_VIC0(13)
> -#define IRQ_EINT14 S5P_IRQ_VIC0(14)
> -#define IRQ_EINT15 S5P_IRQ_VIC0(15)
> +/* Can be used for EINTs 0 to 15 */
> +#define IRQ_EINT(x) ((x) + S5P_IRQ_VIC0(0))
> +
> #define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
> #define IRQ_BATF S5P_IRQ_VIC0(17)
> #define IRQ_MDMA S5P_IRQ_VIC0(18)
> @@ -137,10 +124,18 @@
> #define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
>
> #define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
> -#define IRQ_EINT(x) S5P_EINT(x)
> +/* Can be used for EINTs 16 to 31 */
> +#define IRQ_EINT_GRP(x) S5P_EINT(x)
> +
> +#define EINT_MODE S3C_GPIO_SFN(0xf)
>
> /* Set the default NR_IRQS */
>
> -#define NR_IRQS (IRQ_EINT(31) + 1)
> +#define NR_IRQS (IRQ_EINT_GRP(31) + 1)
> +
> +#define EINT_GPIO_REG0(x) S5PV210_GPH0(x)
> +#define EINT_GPIO_REG1(x) S5PV210_GPH1(x)
> +#define EINT_GPIO_REG2(x) S5PV210_GPH2(x)
> +#define EINT_GPIO_REG3(x) S5PV210_GPH3(x)
>
> #endif /* ASM_ARCH_IRQS_H */
> diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
> new file mode 100644
> index 0000000..fe16292
> --- /dev/null
> +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
> @@ -0,0 +1,46 @@
> +/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
> + *
> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * S5PV210 - GPIO (including EINT) register definitions
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#ifndef __ASM_ARCH_REGS_GPIO_H
> +#define __ASM_ARCH_REGS_GPIO_H __FILE__
> +
> +#include <mach/map.h>
> +
> +#define S5PV210_EINT30CON (S5P_VA_GPIO + 0xE00)
> +#define S5P_EINT_CON(x) (S5PV210_EINT30CON + ((x) * 0x4))
> +
> +#define S5PV210_EINT30FLTCON0 (S5P_VA_GPIO + 0xE80)
> +#define S5P_EINT_FLTCON(x) (S5PV210_EINT30FLTCON0 + ((x) * 0x4))
> +
> +#define S5PV210_EINT30MASK (S5P_VA_GPIO + 0xF00)
> +#define S5P_EINT_MASK(x) (S5PV210_EINT30MASK + ((x) * 0x4))
> +
> +#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40)
> +#define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4))
> +
> +#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \
> + : ((irq) - S5P_IRQ_EINT_BASE))
> +
should we sepreate out the EINT 0..15 cases to make the higher EINT
code easier to process?
> +#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7))
> +
> +#define eint_conf_reg(irq) ((eint_offset(irq)) >> 3)
> +#define eint_mask_reg(irq) ((eint_offset(irq)) >> 3)
> +#define eint_pend_reg(irq) ((eint_offset(irq)) >> 3)
> +
> +/* values for S5P_EXTINT0 */
> +#define S5P_EXTINT_LOWLEV (0x00)
> +#define S5P_EXTINT_HILEV (0x01)
> +#define S5P_EXTINT_FALLEDGE (0x02)
> +#define S5P_EXTINT_RISEEDGE (0x03)
> +#define S5P_EXTINT_BOTHEDGE (0x04)
> +
> +#endif /* __ASM_ARCH_REGS_GPIO_H */
> diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
> index d400a6a..7d1fc40 100644
> --- a/arch/arm/plat-s5p/Kconfig
> +++ b/arch/arm/plat-s5p/Kconfig
> @@ -23,3 +23,8 @@ config PLAT_S5P
> select SAMSUNG_IRQ_UART
> help
> Base platform code for Samsung's S5P series SoC.
> +
> +config S5P_EXT_INT
> + bool
> + help
> + Use the external interrupts (other than GPIO interrupts.)
> diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
> index a7c54b3..25941a5 100644
> --- a/arch/arm/plat-s5p/Makefile
> +++ b/arch/arm/plat-s5p/Makefile
> @@ -16,4 +16,5 @@ obj-y += dev-uart.o
> obj-y += cpu.o
> obj-y += clock.o
> obj-y += irq.o
> +obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
> obj-y += setup-i2c0.o
> diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
> new file mode 100644
> index 0000000..484a8fe
> --- /dev/null
> +++ b/arch/arm/plat-s5p/irq-eint.c
> @@ -0,0 +1,216 @@
> +/* linux/arch/arm/plat-s5p/irq-eint.c
> + *
> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * S5P - IRQ EINT support
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/io.h>
> +#include <linux/sysdev.h>
> +#include <linux/gpio.h>
> +
> +#include <asm/bitops.h>
> +#include <asm/hardware/vic.h>
> +
> +#include <plat/regs-irqtype.h>
> +
> +#include <mach/map.h>
> +#include <plat/cpu.h>
> +#include <plat/pm.h>
> +
> +#include <plat/gpio-cfg.h>
> +#include <mach/regs-gpio.h>
> +
> +static inline void s5p_irq_eint_mask(unsigned int irq)
> +{
> + u32 mask;
> +
> + mask = __raw_readl(S5P_EINT_MASK(eint_mask_reg(irq)));
> + mask |= eint_irq_to_bit(irq);
> + __raw_writel(mask, S5P_EINT_MASK(eint_mask_reg(irq)));
> +}
> +
> +static void s5p_irq_eint_unmask(unsigned int irq)
> +{
> + u32 mask;
> +
> + mask = __raw_readl(S5P_EINT_MASK(eint_mask_reg(irq)));
> + mask &= ~(eint_irq_to_bit(irq));
> + __raw_writel(mask, S5P_EINT_MASK(eint_mask_reg(irq)));
> +}
> +
> +static inline void s5p_irq_eint_ack(unsigned int irq)
> +{
> + __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(eint_pend_reg(irq)));
> +}
> +
> +static void s5p_irq_eint_maskack(unsigned int irq)
> +{
> + /* compiler should in-line these */
> + s5p_irq_eint_mask(irq);
> + s5p_irq_eint_ack(irq);
> +}
> +
> +static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
> +{
> + int offs = eint_offset(irq);
> + int shift;
> + u32 ctrl, mask;
> + u32 newvalue = 0;
> +
> + switch (type) {
> + case IRQ_TYPE_NONE:
> + printk(KERN_WARNING "No edge setting!\n");
> + break;
> +
> + case IRQ_TYPE_EDGE_RISING:
> + newvalue = S5P_EXTINT_RISEEDGE;
> + break;
> +
> + case IRQ_TYPE_EDGE_FALLING:
> + newvalue = S5P_EXTINT_RISEEDGE;
> + break;
> +
> + case IRQ_TYPE_EDGE_BOTH:
> + newvalue = S5P_EXTINT_BOTHEDGE;
> + break;
> +
> + case IRQ_TYPE_LEVEL_LOW:
> + newvalue = S5P_EXTINT_LOWLEV;
> + break;
> +
> + case IRQ_TYPE_LEVEL_HIGH:
> + newvalue = S5P_EXTINT_HILEV;
> + break;
> +
> + default:
> + printk(KERN_ERR "No such irq type %d", type);
> + return -EINVAL;
> + }
> +
> + shift = (offs & 0x7) * 4;
> + mask = 0x7 << shift;
> +
> + ctrl = __raw_readl(S5P_EINT_CON(eint_conf_reg(irq)));
> + ctrl &= ~mask;
> + ctrl |= newvalue << shift;
> + __raw_writel(ctrl, S5P_EINT_CON(eint_conf_reg(irq)));
> +
> + if ((0 <= offs) && (offs < 8))
> + s3c_gpio_cfgpin(EINT_GPIO_REG0(offs & 0x7), EINT_MODE);
> +
> + else if ((8 <= offs) && (offs < 16))
> + s3c_gpio_cfgpin(EINT_GPIO_REG1(offs & 0x7), EINT_MODE);
> +
> + else if ((16 <= offs) && (offs < 24))
> + s3c_gpio_cfgpin(EINT_GPIO_REG2(offs & 0x7), EINT_MODE);
> +
> + else if ((24 <= offs) && (offs < 32))
> + s3c_gpio_cfgpin(EINT_GPIO_REG3(offs & 0x7), EINT_MODE);
> +
> + else
> + printk(KERN_ERR "No such irq number %d", offs);
> +
> + return 0;
> +}
> +
> +static struct irq_chip s5p_irq_eint = {
> + .name = "s5p-eint",
> + .mask = s5p_irq_eint_mask,
> + .unmask = s5p_irq_eint_unmask,
> + .mask_ack = s5p_irq_eint_maskack,
> + .ack = s5p_irq_eint_ack,
> + .set_type = s5p_irq_eint_set_type,
> +#ifdef CONFIG_PM
> + .set_wake = s3c_irqext_wake,
> +#endif
> +};
> +
> +/* s5p_irq_demux_eint
> + *
> + * This function demuxes the IRQ from the group0 external interrupts,
> + * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
> + * the specific handlers s5p_irq_demux_eintX_Y.
> + */
> +static inline void s5p_irq_demux_eint(unsigned int start, unsigned int end)
> +{
> + u32 status;
> + u32 mask = __raw_readl(S5P_EINT_MASK((start >> 3)));
> + unsigned int irq;
> +
> + status = __raw_readl(S5P_EINT_PEND((start >> 3)));
> + status &= ~mask;
> + status &= (1 << (end - start + 1)) - 1;
We don't need to do any masking here as we'll always be processing all
interrupts from the controller. In fact, we probably don't need the end
argument here at-all.
> + while (status) {
> + irq = fls(status);
> + generic_handle_irq(irq - 1 + IRQ_EINT(start));
> + status &= ~(1 << irq);
> + }
> +}
> +
> +static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
> +{
> + s5p_irq_demux_eint(16, 23);
> + s5p_irq_demux_eint(24, 31);
> +}
> +
> +static inline void s5p_irq_vic_eint_mask(unsigned int irq)
> +{
> + s5p_irq_eint_mask(irq);
> +}
> +
> +static void s5p_irq_vic_eint_unmask(unsigned int irq)
> +{
> + s5p_irq_eint_unmask(irq);
> +}
> +
> +static inline void s5p_irq_vic_eint_ack(unsigned int irq)
> +{
> + __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(eint_pend_reg(irq)));
> +}
> +
> +static void s5p_irq_vic_eint_maskack(unsigned int irq)
> +{
> + s5p_irq_vic_eint_mask(irq);
> + s5p_irq_vic_eint_ack(irq);
> +}
> +
> +static struct irq_chip s5p_irq_vic_eint = {
> + .name = "s5p_vic_eint",
> + .mask = s5p_irq_vic_eint_mask,
> + .unmask = s5p_irq_vic_eint_unmask,
> + .mask_ack = s5p_irq_vic_eint_maskack,
> + .ack = s5p_irq_vic_eint_ack,
> + .set_type = s5p_irq_eint_set_type,
> +#ifdef CONFIG_PM
> + .set_wake = s3c_irqext_wake,
> +#endif
> +};
> +
> +int __init s5p_init_irq_eint(void)
> +{
> + int irq;
> +
> + for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
> + set_irq_chip(irq, &s5p_irq_vic_eint);
> +
> + for (irq = IRQ_EINT_GRP(16); irq <= IRQ_EINT_GRP(31); irq++) {
> + set_irq_chip(irq, &s5p_irq_eint);
> + set_irq_handler(irq, handle_level_irq);
> + set_irq_flags(irq, IRQF_VALID);
> + }
> +
> + set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
> + return 0;
> +}
> +
> +arch_initcall(s5p_init_irq_eint);
> --
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
More information about the linux-arm-kernel
mailing list