[PATCH 1/2] pxa/spitz: Correctly register WM8750

Eric Miao eric.y.miao at gmail.com
Fri May 28 10:17:31 EDT 2010


On Fri, May 28, 2010 at 9:33 PM, Pavel Machek <pavel at ucw.cz> wrote:
> On Fri 2010-05-28 04:45:32, Marek Vasut wrote:
>> This patch registers the WM8750 codec on a proper place on the SPITZ machine
>> after the WM8750 driver was converted to new API.
>>
>> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
>> ---
>>  arch/arm/mach-pxa/spitz.c |    3 +++
>>  sound/soc/pxa/spitz.c     |   36 ------------------------------------
>>  2 files changed, 3 insertions(+), 36 deletions(-)
>
> I got rejects on second file when trying to apply it on 2.6.34...?

Pavel,

Could you give it a quick test? It does solve a building issue of
spitz.

>                                                                        Pavel
>
>>
>> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
>> index 4d2413e..c1048a3 100644
>> --- a/arch/arm/mach-pxa/spitz.c
>> +++ b/arch/arm/mach-pxa/spitz.c
>> @@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
>>               .type           = "max7310",
>>               .addr           = 0x18,
>>               .platform_data  = &akita_ioexp,
>> +     }, {
>> +             .type           = "wm8750",
>> +             .addr           = 0x1b,
>>       },
>>  };
>>
>> diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
>> index 1941a35..d256f5f 100644
>> --- a/sound/soc/pxa/spitz.c
>> +++ b/sound/soc/pxa/spitz.c
>> @@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
>>       .codec_dev = &soc_codec_dev_wm8750,
>>  };
>>
>> -/*
>> - * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
>> - * New drivers should register the wm8750 I2C device in the machine
>> - * setup code (under arch/arm for ARM systems).
>> - */
>> -static int wm8750_i2c_register(void)
>> -{
>> -     struct i2c_board_info info;
>> -     struct i2c_adapter *adapter;
>> -     struct i2c_client *client;
>> -
>> -     memset(&info, 0, sizeof(struct i2c_board_info));
>> -     info.addr = 0x1b;
>> -     strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
>> -
>> -     adapter = i2c_get_adapter(0);
>> -     if (!adapter) {
>> -             printk(KERN_ERR "can't get i2c adapter 0\n");
>> -             return -ENODEV;
>> -     }
>> -
>> -     client = i2c_new_device(adapter, &info);
>> -     i2c_put_adapter(adapter);
>> -     if (!client) {
>> -             printk(KERN_ERR "can't add i2c device at 0x%x\n",
>> -             (unsigned int)info.addr);
>> -             return -ENODEV;
>> -     }
>> -
>> -     return 0;
>> -}
>> -
>>  static struct platform_device *spitz_snd_device;
>>
>>  static int __init spitz_init(void)
>> @@ -369,10 +337,6 @@ static int __init spitz_init(void)
>>       if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
>>               return -ENODEV;
>>
>> -     ret = wm8750_i2c_setup();
>> -     if (ret != 0)
>> -             return ret;
>> -
>>       spitz_snd_device = platform_device_alloc("soc-audio", -1);
>>       if (!spitz_snd_device)
>>               return -ENOMEM;
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
>



More information about the linux-arm-kernel mailing list