[PATCH 5/5] pxa/vpac270: Add VGA modes for ADV7125
Eric Miao
eric.y.miao at gmail.com
Wed May 26 09:50:03 EDT 2010
On Fri, May 21, 2010 at 9:12 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
Applied.
> ---
> arch/arm/mach-pxa/vpac270.c | 50 ++++++++++++++++++++++++++++++++++++++++++-
> 1 files changed, 49 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
> index d4bf54a..207a1e5 100644
> --- a/arch/arm/mach-pxa/vpac270.c
> +++ b/arch/arm/mach-pxa/vpac270.c
> @@ -492,7 +492,55 @@ static struct pxafb_mode_info vpac270_lcd_modes[] = {
> .vsync_len = 2,
>
> .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
> -},
> +}, { /* CRT 640x480 */
> + .pixclock = 35000,
> + .xres = 640,
> + .yres = 480,
> + .bpp = 16,
> + .depth = 16,
> +
> + .left_margin = 96,
> + .right_margin = 48,
> + .upper_margin = 33,
> + .lower_margin = 10,
> +
> + .hsync_len = 48,
> + .vsync_len = 1,
> +
> + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
> +}, { /* CRT 800x600 H=30kHz V=48HZ */
> + .pixclock = 25000,
> + .xres = 800,
> + .yres = 600,
> + .bpp = 16,
> + .depth = 16,
> +
> + .left_margin = 50,
> + .right_margin = 1,
> + .upper_margin = 21,
> + .lower_margin = 12,
> +
> + .hsync_len = 8,
> + .vsync_len = 1,
> +
> + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
> +}, { /* CRT 1024x768 H=40kHz V=50Hz */
> + .pixclock = 15000,
> + .xres = 1024,
> + .yres = 768,
> + .bpp = 16,
> + .depth = 16,
> +
> + .left_margin = 220,
> + .right_margin = 8,
> + .upper_margin = 33,
> + .lower_margin = 2,
> +
> + .hsync_len = 48,
> + .vsync_len = 1,
> +
> + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
> +}
> };
>
> static struct pxafb_mach_info vpac270_lcd_screen = {
> --
> 1.7.0
>
>
More information about the linux-arm-kernel
mailing list