[PATCH 04/10] omap: hsmmc: fix the hsmmc driver for am3517
Tony Lindgren
tony at atomide.com
Fri May 14 17:27:57 EDT 2010
From: stanley.miao <stanley.miao at windriver.com>
AM3517 don't have the register OMAP343X_CONTROL_PBIAS_LITE and the regulators
like "vmmc", so we set a noop "set_power" function for it.
Signed-off-by: Stanley.Miao <stanley.miao at windriver.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap2/hsmmc.c | 27 +++++++++++++++++++++------
arch/arm/plat-omap/include/plat/mmc.h | 4 ++++
2 files changed, 25 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 9ad2295..2d36f3a 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -139,6 +139,12 @@ static void hsmmc23_before_set_reg(struct device *dev, int slot,
}
}
+static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ return 0;
+}
+
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
@@ -216,11 +222,18 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
*/
mmc->slots[0].ocr_mask = c->ocr_mask;
+ if (cpu_is_omap3517() || cpu_is_omap3505())
+ mmc->slots[0].set_power = nop_mmc_set_power;
+ else
+ mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+
switch (c->mmc) {
case 1:
- /* on-chip level shifting via PBIAS0/PBIAS1 */
- mmc->slots[0].before_set_reg = hsmmc1_before_set_reg;
- mmc->slots[0].after_set_reg = hsmmc1_after_set_reg;
+ if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ /* on-chip level shifting via PBIAS0/PBIAS1 */
+ mmc->slots[0].before_set_reg = hsmmc1_before_set_reg;
+ mmc->slots[0].after_set_reg = hsmmc1_after_set_reg;
+ }
/* Omap3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() && c->wires > 4) {
@@ -235,9 +248,11 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
c->wires = 4;
/* FALLTHROUGH */
case 3:
- /* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
- mmc->slots[0].after_set_reg = NULL;
+ if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ /* off-chip level shifting, or none */
+ mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+ mmc->slots[0].after_set_reg = NULL;
+ }
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index a1bac07..c835f1e 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -102,6 +102,10 @@ struct omap_mmc_platform_data {
/* Regulator off remapped to sleep */
unsigned vcc_aux_disable_is_sleep:1;
+ /* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS (1 << 0)
+ unsigned features;
+
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
More information about the linux-arm-kernel
mailing list