[PATCH 03/15] ARM: S3C2416: Add S3C2416-specific registers definitions
Ben Dooks
ben-linux at fluff.org
Tue May 11 22:35:54 EDT 2010
From: Yauhen Kharuzhy <jekhor at gmail.com>
Add macros for S3C2416 SoC support.
Signed-off-by: Yauhen Kharuzhy <jekhor at gmail.com>
[ben-linux at fluff.org: removed files that need changing]
[ben-linux at fluff.org: Fix S3C2416_GPH0_TXD0 definition]
Signed-off-by: Ben Dooks <ben-linux at fluff.org>
---
arch/arm/mach-s3c2410/include/mach/dma.h | 2 +-
arch/arm/mach-s3c2410/include/mach/irqs.h | 22 +++++++++++-
arch/arm/mach-s3c2410/include/mach/regs-dsc.h | 36 ++++++++++++++++++++
arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 28 +++++++++++++++
arch/arm/mach-s3c2410/include/mach/regs-irq.h | 10 +++++
.../mach-s3c2410/include/mach/regs-s3c2416-mem.h | 30 ++++++++++++++++
arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h | 24 +++++++++++++
7 files changed, 150 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 08ac5f9..cf68136 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -54,7 +54,7 @@ enum dma_ch {
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
/* we have 4 dma channels */
-#ifndef CONFIG_CPU_S3C2443
+#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416)
#define S3C_DMA_CHANNELS (4)
#else
#define S3C_DMA_CHANNELS (6)
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 6c12c63..c1b8ec0 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -115,6 +115,26 @@
#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13)
#define IRQ_S3C2412_CF S3C2410_IRQSUB(14)
+
+#define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5)
+#define IRQ_S3C2416_DMA S3C2410_IRQ(17)
+#define IRQ_S3C2416_UART3 S3C2410_IRQ(18)
+#define IRQ_S3C2416_SDI1 S3C2410_IRQ(20)
+#define IRQ_S3C2416_SDI0 S3C2410_IRQ(21)
+
+#define IRQ_S3C2416_LCD2 S3C2410_IRQSUB(15)
+#define IRQ_S3C2416_LCD3 S3C2410_IRQSUB(16)
+#define IRQ_S3C2416_LCD4 S3C2410_IRQSUB(17)
+#define IRQ_S3C2416_DMA0 S3C2410_IRQSUB(18)
+#define IRQ_S3C2416_DMA1 S3C2410_IRQSUB(19)
+#define IRQ_S3C2416_DMA2 S3C2410_IRQSUB(20)
+#define IRQ_S3C2416_DMA3 S3C2410_IRQSUB(21)
+#define IRQ_S3C2416_DMA4 S3C2410_IRQSUB(22)
+#define IRQ_S3C2416_DMA5 S3C2410_IRQSUB(23)
+#define IRQ_S32416_WDT S3C2410_IRQSUB(27)
+#define IRQ_S32416_AC97 S3C2410_IRQSUB(28)
+
+
/* extra irqs for s3c2440 */
#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */
@@ -152,7 +172,7 @@
#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
-#ifdef CONFIG_CPU_S3C2443
+#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
#define NR_IRQS (IRQ_S3C2443_AC97+1)
#else
#define NR_IRQS (IRQ_S3C2440_AC97+1)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
index 3c3853c..98fd4a0 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
@@ -19,6 +19,42 @@
#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
#endif
+#if defined(CONFIG_CPU_S3C2416)
+#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0)
+#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4)
+#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8)
+#define S3C2416_DSC3 S3C2410_GPIOREG(0x110)
+
+#define S3C2416_SELECT_DSC0 (0 << 30)
+#define S3C2416_SELECT_DSC1 (1 << 30)
+#define S3C2416_SELECT_DSC2 (2 << 30)
+#define S3C2416_SELECT_DSC3 (3 << 30)
+
+#define S3C2416_DSC_GETSHIFT(x) (x & 30)
+
+#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28)
+#define S3C2416_DSC0_CF_5mA (0 << 28)
+#define S3C2416_DSC0_CF_10mA (1 << 28)
+#define S3C2416_DSC0_CF_15mA (2 << 28)
+#define S3C2416_DSC0_CF_21mA (3 << 28)
+#define S3C2416_DSC0_CF_MASK (3 << 28)
+
+#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26)
+#define S3C2416_DSC0_nRBE_5mA (0 << 26)
+#define S3C2416_DSC0_nRBE_10mA (1 << 26)
+#define S3C2416_DSC0_nRBE_15mA (2 << 26)
+#define S3C2416_DSC0_nRBE_21mA (3 << 26)
+#define S3C2416_DSC0_nRBE_MASK (3 << 26)
+
+#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24)
+#define S3C2416_DSC0_nROE_5mA (0 << 24)
+#define S3C2416_DSC0_nROE_10mA (1 << 24)
+#define S3C2416_DSC0_nROE_15mA (2 << 24)
+#define S3C2416_DSC0_nROE_21mA (3 << 24)
+#define S3C2416_DSC0_nROE_MASK (3 << 24)
+
+#endif
+
#if defined(CONFIG_CPU_S3C244X)
#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 821b966..a638423 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -610,29 +610,50 @@
#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
#define S3C2410_GPH0_nCTS0 (0x02 << 0)
+#define S3C2416_GPH0_TXD0 (0x02 << 0)
#define S3C2410_GPH1_nRTS0 (0x02 << 2)
+#define S3C2416_GPH1_RXD0 (0x02 << 2)
#define S3C2410_GPH2_TXD0 (0x02 << 4)
+#define S3C2416_GPH2_TXD1 (0x02 << 4)
#define S3C2410_GPH3_RXD0 (0x02 << 6)
+#define S3C2416_GPH3_RXD1 (0x02 << 6)
#define S3C2410_GPH4_TXD1 (0x02 << 8)
+#define S3C2416_GPH4_TXD2 (0x02 << 8)
#define S3C2410_GPH5_RXD1 (0x02 << 10)
+#define S3C2416_GPH5_RXD2 (0x02 << 10)
#define S3C2410_GPH6_TXD2 (0x02 << 12)
+#define S3C2416_GPH6_TXD3 (0x02 << 12)
#define S3C2410_GPH6_nRTS1 (0x03 << 12)
+#define S3C2416_GPH6_nRTS2 (0x03 << 12)
#define S3C2410_GPH7_RXD2 (0x02 << 14)
+#define S3C2416_GPH7_RXD3 (0x02 << 14)
#define S3C2410_GPH7_nCTS1 (0x03 << 14)
+#define S3C2416_GPH7_nCTS2 (0x03 << 14)
#define S3C2410_GPH8_UCLK (0x02 << 16)
+#define S3C2416_GPH8_nCTS0 (0x02 << 16)
#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
+#define S3C2416_GPH9_nRTS0 (0x02 << 18)
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+#define S3C2416_GPH10_nCTS1 (0x02 << 20)
+
+#define S3C2416_GPH11_nRTS1 (0x02 << 22)
+
+#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
+
+#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
+
+#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
/* The S3C2412 and S3C2413 move the GPJ register set to after
* GPH, which means all registers after 0x80 are now offset by 0x10
@@ -703,6 +724,7 @@
#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8)
#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
+#define S3C2416_MISCCR_SEL_SUSPND (1<<12)
#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
#define S3C2410_MISCCR_nRSTCON (1<<16)
@@ -712,6 +734,9 @@
#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */
#define S3C2410_MISCCR_SDSLEEP (7<<17)
+#define S3C2416_MISCCR_FLT_I2C (1<<24)
+#define S3C2416_MISCCR_HSSPI_EN2 (1<<31)
+
/* external interrupt control... */
/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
* S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
@@ -779,8 +804,11 @@
#define S3C2410_GSTATUS1_IDMASK (0xffff0000)
#define S3C2410_GSTATUS1_2410 (0x32410000)
#define S3C2410_GSTATUS1_2412 (0x32412001)
+#define S3C2410_GSTATUS1_2416 (0x32416003)
#define S3C2410_GSTATUS1_2440 (0x32440000)
#define S3C2410_GSTATUS1_2442 (0x32440aaa)
+/* some 2416 CPUs report this value also */
+#define S3C2410_GSTATUS1_2450 (0x32450003)
#define S3C2410_GSTATUS2_WTRESET (1<<2)
#define S3C2410_GSTATUS2_OFFRESET (1<<1)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
index de86ee8..0f07ba3 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
@@ -27,6 +27,16 @@
#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018)
#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C)
+#define S3C2416_PRIORITY_MODE1 S3C2410_IRQREG(0x030)
+#define S3C2416_PRIORITY_UPDATE1 S3C2410_IRQREG(0x034)
+#define S3C2416_SRCPND2 S3C2410_IRQREG(0x040)
+#define S3C2416_INTMOD2 S3C2410_IRQREG(0x044)
+#define S3C2416_INTMSK2 S3C2410_IRQREG(0x048)
+#define S3C2416_INTPND2 S3C2410_IRQREG(0x050)
+#define S3C2416_INTOFFSET2 S3C2410_IRQREG(0x054)
+#define S3C2416_PRIORITY_MODE2 S3C2410_IRQREG(0x070)
+#define S3C2416_PRIORITY_UPDATE2 S3C2410_IRQREG(0x074)
+
/* mask: 0=enable, 1=disable
* 1 bit EINT, 4=EINT4, 23=EINT23
* EINT0,1,2,3 are not handled here.
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
new file mode 100644
index 0000000..2f31b74
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor at gmail.com>,
+ * as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy at promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2416_MEM
+#define __ASM_ARM_REGS_S3C2416_MEM
+
+#ifndef S3C2416_MEMREG
+#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2416_BANKCFG S3C2416_MEMREG(0x00)
+#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04)
+#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08)
+#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C)
+
+#define S3C2416_REFRESH S3C2416_MEMREG(0x10)
+#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14)
+
+#endif /* __ASM_ARM_REGS_S3C2416_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
new file mode 100644
index 0000000..e443167
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor at gmail.com>,
+ * as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy at promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2416_H
+#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
+
+#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44)
+#define S3C2416_SWRST_RESET (0x533C2416)
+
+/* see regs-power.h for the other registers in the power block. */
+
+#endif /* __ASM_ARCH_REGS_S3C2416_H */
+
--
1.6.3.3
More information about the linux-arm-kernel
mailing list