[PATCH 1/2] pxa/spitz: Correctly register WM8750

Eric Miao eric.y.miao at gmail.com
Mon May 31 00:24:18 EDT 2010


On Fri, May 28, 2010 at 10:42 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
> This patch registers the WM8750 codec on a proper place on the SPITZ machine
> after the WM8750 driver was converted to new API.
>
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>

Applied to 'fix'.

> ---
>  arch/arm/mach-pxa/spitz.c |    3 +++
>  sound/soc/pxa/spitz.c     |   36 ------------------------------------
>  2 files changed, 3 insertions(+), 36 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index 4d2413e..c1048a3 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
>                .type           = "max7310",
>                .addr           = 0x18,
>                .platform_data  = &akita_ioexp,
> +       }, {
> +               .type           = "wm8750",
> +               .addr           = 0x1b,
>        },
>  };
>
> diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
> index 1941a35..d256f5f 100644
> --- a/sound/soc/pxa/spitz.c
> +++ b/sound/soc/pxa/spitz.c
> @@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
>        .codec_dev = &soc_codec_dev_wm8750,
>  };
>
> -/*
> - * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
> - * New drivers should register the wm8750 I2C device in the machine
> - * setup code (under arch/arm for ARM systems).
> - */
> -static int wm8750_i2c_register(void)
> -{
> -       struct i2c_board_info info;
> -       struct i2c_adapter *adapter;
> -       struct i2c_client *client;
> -
> -       memset(&info, 0, sizeof(struct i2c_board_info));
> -       info.addr = 0x1b;
> -       strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
> -
> -       adapter = i2c_get_adapter(0);
> -       if (!adapter) {
> -               printk(KERN_ERR "can't get i2c adapter 0\n");
> -               return -ENODEV;
> -       }
> -
> -       client = i2c_new_device(adapter, &info);
> -       i2c_put_adapter(adapter);
> -       if (!client) {
> -               printk(KERN_ERR "can't add i2c device at 0x%x\n",
> -               (unsigned int)info.addr);
> -               return -ENODEV;
> -       }
> -
> -       return 0;
> -}
> -
>  static struct platform_device *spitz_snd_device;
>
>  static int __init spitz_init(void)
> @@ -369,10 +337,6 @@ static int __init spitz_init(void)
>        if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
>                return -ENODEV;
>
> -       ret = wm8750_i2c_setup();
> -       if (ret != 0)
> -               return ret;
> -
>        spitz_snd_device = platform_device_alloc("soc-audio", -1);
>        if (!spitz_snd_device)
>                return -ENOMEM;
> --
> 1.7.0
>
>



More information about the linux-arm-kernel mailing list