[PATCH 1/1] mx31smartbot: change the config of a gpio

[Sascha Hauer]

On Wed, May 05, 2010 at 11:34:21AM +0200, Valentin Longchamp wrote:
> Since it is finally used on the handbot as a configuration input for
> the translator.
> 
> Signed-off-by: Valentin Longchamp <valentin.longchamp at epfl.ch>

Ok, added to mxc-master.

Sascha

> ---
>  arch/arm/mach-mx3/mx31moboard-smartbot.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
> index 52a69fc..83d2b9f 100644
> --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
> +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
> @@ -119,7 +119,7 @@ static int __init smartbot_cam_init(void)
>  #define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
>  #define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
>  #define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
> -#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
> +#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
>  
>  static void smartbot_resets_init(void)
>  {
> @@ -138,9 +138,9 @@ static void smartbot_resets_init(void)
>  		gpio_export(TRSLAT_RST_B, false);
>  	}
>  
> -	if (!gpio_request(SEL3, "sel3")) {
> -		gpio_direction_input(SEL3);
> -		gpio_export(SEL3, true);
> +	if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
> +		gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
> +		gpio_export(TRSLAT_SRC_CHOICE, false);
>  	}
>  }
>  /*
> -- 
> 1.7.0.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |