[PATCH 4/5] ARM: S5PV210: Add keypad device to the Aquila board
Joonyoung Shim
jy0922.shim at samsung.com
Fri May 28 07:51:48 EDT 2010
This patch is to support keypad device to the Aquila board.
Signed-off-by: Joonyoung Shim <jy0922.shim at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
arch/arm/mach-s5pv210/Kconfig | 2 ++
arch/arm/mach-s5pv210/mach-aquila.c | 25 +++++++++++++++++++++++++
2 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 6f41b2d..25b9e96 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -55,8 +55,10 @@ config MACH_AQUILA
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_KEYPAD
select S3C_DEV_FB
select S5PC110_DEV_ONENAND
+ select SAMSUNG_DEV_KEYPAD
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index fb9dbb2..526fed8 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -28,6 +28,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
+#include <plat/keypad.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -116,9 +117,30 @@ static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
+/* KEYPAD */
+static uint32_t keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 0, KEY_CAMERA), /* Full Shot */
+ KEY(0, 1, KEY_VOLUMEUP),
+ KEY(1, 0, KEY_CONFIG), /* Halt Shot */
+ KEY(1, 1, KEY_VOLUMEDOWN),
+};
+
+static struct matrix_keymap_data keymap_data __initdata = {
+ .keymap = keymap,
+ .keymap_size = ARRAY_SIZE(keymap),
+};
+
+static struct samsung_kp_platdata keypad_data __initdata = {
+ .keymap_data = &keymap_data,
+ .rows = 2,
+ .cols = 3,
+};
+
static struct platform_device *aquila_devices[] __initdata = {
&s3c_device_fb,
&s5pc110_device_onenand,
+ &samsung_device_keypad,
};
static void __init aquila_map_io(void)
@@ -133,6 +155,9 @@ static void __init aquila_machine_init(void)
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
+ /* KEYPAD */
+ samsung_kp_set_platdata(&keypad_data);
+
platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
}
--
1.7.0.4
More information about the linux-arm-kernel
mailing list