[PATCH 3/6] [ARM] pxa/hx4700: encode IRQ number into .nr_irqs
Eric Miao
eric.y.miao at gmail.com
Mon May 24 02:35:46 EDT 2010
Cc: Philipp Zabel <philipp.zabel at gmail.com>
Signed-off-by: Eric Miao <eric.y.miao at gmail.com>
---
arch/arm/mach-pxa/Kconfig | 1 -
arch/arm/mach-pxa/hx4700.c | 1 +
arch/arm/mach-pxa/include/mach/hx4700.h | 4 ++++
arch/arm/mach-pxa/include/mach/irqs.h | 4 +---
4 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index bf49135..32b1fd2 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -259,7 +259,6 @@ config MACH_H4700
select PXA27x
select IWMMXT
select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
config MACH_H5000
bool "HP iPAQ h5000"
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 848c861..10104f1 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -874,6 +874,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
.init_machine = hx4700_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 9eaeed1..862a190 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -128,4 +128,8 @@
#define EGPIO7_VCC_3V3_WL_EN (HX4700_EGPIO_BASE + 7) /* WLAN 3.3V enable */
#define EGPIO8_USB_3V3_ON (HX4700_EGPIO_BASE + 8) /* unused */
+/*
+ * IRQs
+ */
+#define HX4700_NR_IRQS (IRQ_BOARD_START + 70) /* ASIC3 */
#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 3b3b245..169567c 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -125,9 +125,7 @@
*/
#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
-#if defined(CONFIG_MACH_H4700)
-#define IRQ_BOARD_END (IRQ_BOARD_START + 70)
-#elif defined(CONFIG_PXA_EZX)
+#if defined(CONFIG_PXA_EZX)
#define IRQ_BOARD_END (IRQ_BOARD_START + 23)
#else
#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
--
1.7.0.4
More information about the linux-arm-kernel
mailing list