[GIT PULL] pxa: patches for .35 merge window (34-rc7 based)
Marek Vasut
marek.vasut at gmail.com
Tue May 11 19:30:55 EDT 2010
Dne Út 11. května 2010 17:34:49 Eric Miao napsal(a):
> The following changes since commit
> b57f95a38233a2e73b679bea4a5453a1cc2a1cc9: Linus Torvalds (1):
> Linux 2.6.34-rc7
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
> devel
>
> Eric Miao (17):
> input: remove now deprecated corgi_ts.c touchscreen driver
> [ARM] pxa: remove now un-used corgi_ssp.c and corgi_lcd.c
> [ARM] pxa: remove the now legacy SSP API
> [ARM] pxa: correct SSCR0_SCR to support multiple SoCs
> [ARM] pxa: merge regs-ssp.h into ssp.h
> [ARM] pxa: remove unnecessary #include of <mach/ssp.h>
> [ARM] pxa: remove incorrect select PXA_SSP in Kconfig
> [ARM] pxa: add MFP_LPM_KEEP_OUTPUT flag to pin config
> [ARM] pxa: allow keypad GPIOs to wakeup when configured as generic
> [ARM] pxa: allow MFP_LPM_INPUT to be explicitly specified
> [ARM] pxa/spitz: use generic GPIO API and remove pxa_gpio_mode()
> [ARM] pxa/corgi: use generic GPIO API and remove pxa_gpio_mode()
> [ARM] pxa/corgi: cleanup GPIO configurations and low power mode
> settings [ARM] pxa/tosa: move CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES to
> mach/Kconfig input: remove obsolete {corgi,spitz,tosa}kbd.c
> [ARM] pxa: remove pxa_gpio_mode() and files
> [ARM] pxa: make it clear by converting MMC 'delay_detect' to
> millisecond
>
> Haojian Zhuang (13):
> [ARM] pxa: move ssp into common plat-pxa
> [ARM] pxa: simplify ifdef in ssp.h
> [ARM] mmp: support ssp in pxa168
> [ARM] mmp: enable ssp in aspenite
> [ARM] mmp: update clock register function
> [ARM] mmp: enable L2 in mmp2
> [ARM] mmp: update mmp2 defconfig
> [ARM] mmp: configure gpio pins from 128 to 192
> [ARM] mmp: update mfp setting
> [ARM] mmp: add dma support to mmp2
> [ARM] mmp: update twsi index
> [ARM] mmp: append device support in jasper
> [ARM] pxa: add namespace on ssp
>
> Igor Grinberg (5):
> [ARM] pxa/cm-x300.c: add battery charger support
> [ARM] pxa/cm-x300: da903x WLED is not connected on cm-x300
> [ARM] pxa/cm-x300: fix da903x IRQ line assignment
> [ARM] pxa/cm-x300: add regulator on vcc_core
> [ARM] pxa/cm-x300: update the memory fixup.
>
> Julia Lawall (2):
> [ARM] pxa: avoid NULL dereferencing in error handling of ssp.c
> [ARM] pxa: use resource_size() in ssp.c
>
> Marek (1):
> [ARM] pxa: add basic support for Voipac PXA270 SBC
>
> Marek Vasut (11):
> [ARM] pxa: add basic support for the Aeronix Zipit Z2 handheld
> [ARM] pxa: add support for Voipac PXA270 PCMCIA
> [ARM] pxa/vpac270: UDC and UHC support
> [ARM] pxa/vpac270: add ethernet support
> [ARM] pxa/vpac270: Add touchscreen support
> [ARM] pxa/vpac270: Add DS1339 RTC support
> [ARM] pxa/vpac270: add ide support
> [ARM] pxa/vpac270: remove TS_IRQ magic number
> [ARM] pxa/vpac270: add OneNAND support
> [ARM] pxa/vpac270: fix now invalid bit of UP2OCR
> MAINTAINERS: New MAINTAINERS entries for Zipit Z2 and Voipac PXA270
>
The's me ... twice ;-)
More information about the linux-arm-kernel
mailing list