[PATCH v6 RE-SEND] ARM: S5P: Add Ext interrupt support.

Kukjin Kim kgene.kim at samsung.com
Thu May 20 01:40:11 EDT 2010


From: Jongpill Lee <boyko.lee at samsung.com>

This patch adds the following:

1. Adds external interrupt support for S5PV210.
2. Adds common defines related to external interrupt support for plat-s5p
   based platforms.
3. Based on the new common defines, corresponding changes are made in the
   affected platforms (S5P6440 and S5P6442).

Signed-off-by: Jongpill Lee <boyko.lee at samsung.com>
Signed-off-by: Pannaga Bhushan <p.bhushan at samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
---
 arch/arm/mach-s5p6440/include/mach/irqs.h      |    9 +-
 arch/arm/mach-s5p6442/include/mach/irqs.h      |    5 +-
 arch/arm/mach-s5pv210/Kconfig                  |    1 +
 arch/arm/mach-s5pv210/include/mach/irqs.h      |   25 +---
 arch/arm/mach-s5pv210/include/mach/regs-gpio.h |   48 +++++
 arch/arm/plat-s5p/Kconfig                      |    6 +
 arch/arm/plat-s5p/Makefile                     |    1 +
 arch/arm/plat-s5p/include/plat/irqs.h          |    7 +
 arch/arm/plat-s5p/irq-eint.c                   |  218 ++++++++++++++++++++++++
 9 files changed, 295 insertions(+), 25 deletions(-)
 create mode 100644 arch/arm/mach-s5pv210/include/mach/regs-gpio.h
 create mode 100644 arch/arm/plat-s5p/irq-eint.c

diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
index a4b9b40..911854d 100644
--- a/arch/arm/mach-s5p6440/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6440/include/mach/irqs.h
@@ -72,7 +72,14 @@
 #define S5P_IRQ_EINT_BASE	(S5P_IRQ_VIC1(31) + 6)
 
 #define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S5P_EINT(x)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_EINT_BASE)
+/*
+ * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
+ * to wake up from sleep. If request is beyond this range by mistake, a large
+ * return value for an irq number should be indication of something amiss.
+ */
+#define S5P_EINT_BASE2		(0xf0000000)
 
 /*
  * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
index da66580..02c2374 100644
--- a/arch/arm/mach-s5p6442/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -77,8 +77,9 @@
 
 #define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
 
-#define IRQ_EINT(x)             ((x) < 16 ? S5P_IRQ_VIC0(x) : \
-					(S5P_IRQ_EINT_BASE + (x)-16))
+#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2		(S5P_IRQ_EINT_BASE)
+
 /* Set the default NR_IRQS */
 
 #define NR_IRQS 		(IRQ_EINT(31) + 1)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index af33a1a..c4c2a7f 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -12,6 +12,7 @@ if ARCH_S5PV210
 config CPU_S5PV210
 	bool
 	select PLAT_S5P
+	select S5P_EXT_INT
 	help
 	  Enable S5PV210 CPU support
 
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 62c5175..69712bb 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -17,22 +17,6 @@
 
 /* VIC0: System, DMA, Timer */
 
-#define IRQ_EINT0		S5P_IRQ_VIC0(0)
-#define IRQ_EINT1		S5P_IRQ_VIC0(1)
-#define IRQ_EINT2		S5P_IRQ_VIC0(2)
-#define IRQ_EINT3		S5P_IRQ_VIC0(3)
-#define IRQ_EINT4		S5P_IRQ_VIC0(4)
-#define IRQ_EINT5		S5P_IRQ_VIC0(5)
-#define IRQ_EINT6		S5P_IRQ_VIC0(6)
-#define IRQ_EINT7		S5P_IRQ_VIC0(7)
-#define IRQ_EINT8		S5P_IRQ_VIC0(8)
-#define IRQ_EINT9		S5P_IRQ_VIC0(9)
-#define IRQ_EINT10		S5P_IRQ_VIC0(10)
-#define IRQ_EINT11		S5P_IRQ_VIC0(11)
-#define IRQ_EINT12		S5P_IRQ_VIC0(12)
-#define IRQ_EINT13		S5P_IRQ_VIC0(13)
-#define IRQ_EINT14		S5P_IRQ_VIC0(14)
-#define IRQ_EINT15		S5P_IRQ_VIC0(15)
 #define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
 #define IRQ_BATF		S5P_IRQ_VIC0(17)
 #define IRQ_MDMA		S5P_IRQ_VIC0(18)
@@ -134,13 +118,10 @@
 #define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
 #define IRQ_VIC_END		S5P_IRQ_VIC3(31)
 
-#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
-
-#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S5P_EINT(x)
+#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
 /* Set the default NR_IRQS */
-
-#define NR_IRQS 		(IRQ_EINT(31) + 1)
+#define NR_IRQS			(IRQ_EINT(31) + 1)
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
new file mode 100644
index 0000000..49e029b
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 - GPIO (including EINT) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+#define S5PV210_EINT30CON		(S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x)			(S5PV210_EINT30CON + ((x) * 0x4))
+
+#define S5PV210_EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x)		(S5PV210_EINT30FLTCON0 + ((x) * 0x4))
+
+#define S5PV210_EINT30MASK		(S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x)		(S5PV210_EINT30MASK + ((x) * 0x4))
+
+#define S5PV210_EINT30PEND		(S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x)		(S5PV210_EINT30PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
+
+/* values for S5P_EXTINT0 */
+#define S5P_EXTINT_LOWLEV		(0x00)
+#define S5P_EXTINT_HILEV		(0x01)
+#define S5P_EXTINT_FALLEDGE		(0x02)
+#define S5P_EXTINT_RISEEDGE		(0x03)
+#define S5P_EXTINT_BOTHEDGE		(0x04)
+
+#define EINT_MODE		S3C_GPIO_SFN(0xf)
+
+#define EINT_GPIO_0(x)		S5PV210_GPH0(x)
+#define EINT_GPIO_1(x)		S5PV210_GPH1(x)
+#define EINT_GPIO_2(x)		S5PV210_GPH2(x)
+#define EINT_GPIO_3(x)		S5PV210_GPH3(x)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index d400a6a..b10e2ab 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -23,3 +23,9 @@ config PLAT_S5P
 	select SAMSUNG_IRQ_UART
 	help
 	  Base platform code for Samsung's S5P series SoC.
+
+config S5P_EXT_INT
+	bool
+	help
+	  Use the external interrupts (other than GPIO interrupts.)
+	  Note: Do not choose this for S5P6440.
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index a7c54b3..25941a5 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -16,4 +16,5 @@ obj-y				+= dev-uart.o
 obj-y				+= cpu.o
 obj-y				+= clock.o
 obj-y				+= irq.o
+obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 obj-y				+= setup-i2c0.o
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 9ff3d71..3fb3a3a 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -87,4 +87,11 @@
 #define IRQ_TIMER3		S5P_TIMER_IRQ(3)
 #define IRQ_TIMER4		S5P_TIMER_IRQ(4)
 
+#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+					: ((x) - 16 + S5P_EINT_BASE2))
+
+#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
+						((irq) - S5P_EINT_BASE1) : \
+						((irq) + 16 - S5P_EINT_BASE2))
+
 #endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
new file mode 100644
index 0000000..e56c807
--- /dev/null
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -0,0 +1,218 @@
+/* linux/arch/arm/plat-s5p/irq-eint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/regs-gpio.h>
+
+static inline void s5p_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask &= ~(eint_irq_to_bit(irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static inline void s5p_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s5p_irq_eint_mask(irq);
+	s5p_irq_eint_ack(irq);
+}
+
+static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = EINT_OFFSET(irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+
+	if ((0 <= offs) && (offs < 8))
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+
+	else if ((8 <= offs) && (offs < 16))
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+
+	else if ((16 <= offs) && (offs < 24))
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+
+	else if ((24 <= offs) && (offs < 32))
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+
+	else
+		printk(KERN_ERR "No such irq number %d", offs);
+
+	return 0;
+}
+
+static struct irq_chip s5p_irq_eint = {
+	.name		= "s5p-eint",
+	.mask		= s5p_irq_eint_mask,
+	.unmask		= s5p_irq_eint_unmask,
+	.mask_ack	= s5p_irq_eint_maskack,
+	.ack		= s5p_irq_eint_ack,
+	.set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/* s5p_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from EINTs 16 to 31. It is designed to be inlined into the specific
+ * handler s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5p_irq_demux_eint(unsigned int start)
+{
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+	unsigned int irq;
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s5p_irq_demux_eint(IRQ_EINT(16));
+	s5p_irq_demux_eint(IRQ_EINT(24));
+}
+
+static inline void s5p_irq_vic_eint_mask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+
+	s5p_irq_eint_mask(irq);
+	writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s5p_irq_vic_eint_unmask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+
+	s5p_irq_eint_unmask(irq);
+	writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE);
+}
+
+static inline void s5p_irq_vic_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_vic_eint_maskack(unsigned int irq)
+{
+	s5p_irq_vic_eint_mask(irq);
+	s5p_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s5p_irq_vic_eint = {
+	.name		= "s5p_vic_eint",
+	.mask		= s5p_irq_vic_eint_mask,
+	.unmask		= s5p_irq_vic_eint_unmask,
+	.mask_ack	= s5p_irq_vic_eint_maskack,
+	.ack		= s5p_irq_vic_eint_ack,
+	.set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+int __init s5p_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
+		set_irq_chip(irq, &s5p_irq_vic_eint);
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		set_irq_chip(irq, &s5p_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
+	return 0;
+}
+
+arch_initcall(s5p_init_irq_eint);
-- 
1.6.3.3




More information about the linux-arm-kernel mailing list