[PATCH v2 1/5] ARM: SAMSUNG: Add keypad device support

Joonyoung Shim jy0922.shim at samsung.com
Sun May 30 21:09:09 EDT 2010


On 5/31/2010 9:06 AM, Kukjin Kim wrote:
> Joonyoung Shim wrote:
>> This patch adds samsung keypad device definition for samsung cpus.
>>
>> Signed-off-by: Joonyoung Shim <jy0922.shim at samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>>  arch/arm/plat-samsung/Kconfig                    |    7 ++-
>>  arch/arm/plat-samsung/Makefile                   |    1 +
>>  arch/arm/plat-samsung/dev-keypad.c               |   50
>> +++++++++++++++++++
>>  arch/arm/plat-samsung/include/plat/devs.h        |    2 +
>>  arch/arm/plat-samsung/include/plat/keypad.h      |   57
>> ++++++++++++++++++++++
>>  arch/arm/plat-samsung/include/plat/regs-keypad.h |   49
> +++++++++++++++++++
>>  6 files changed, 165 insertions(+), 1 deletions(-)
>>  create mode 100644 arch/arm/plat-samsung/dev-keypad.c
>>  create mode 100644 arch/arm/plat-samsung/include/plat/keypad.h
>>  create mode 100644 arch/arm/plat-samsung/include/plat/regs-keypad.h
>>
>> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
>> index 2753fb3..3ef2df7 100644
>> --- a/arch/arm/plat-samsung/Kconfig
>> +++ b/arch/arm/plat-samsung/Kconfig
>> @@ -225,7 +225,12 @@ config S3C64XX_DEV_SPI
>>  config SAMSUNG_DEV_TS
>>  	bool
>>  	help
>> -	    Common in platform device definitions for touchscreen device
>> +	  Common in platform device definitions for touchscreen device
>> +
> 
> Above changing is not for keypad.
> 

OK, but this give a warning of checkpatch to me.

>> +config SAMSUNG_DEV_KEYPAD
>> +	bool
>> +	help
>> +	  Compile in platform device definitions for keypad
>>
>>  # DMA
>>
>> diff --git a/arch/arm/plat-samsung/Makefile
> b/arch/arm/plat-samsung/Makefile
>> index 228c2ad..ef00c47 100644
>> --- a/arch/arm/plat-samsung/Makefile
>> +++ b/arch/arm/plat-samsung/Makefile
>> @@ -50,6 +50,7 @@ obj-$(CONFIG_S3C_DEV_RTC)	+= dev-rtc.o
>>
>>  obj-$(CONFIG_SAMSUNG_DEV_ADC)	+= dev-adc.o
>>  obj-$(CONFIG_SAMSUNG_DEV_TS)	+= dev-ts.o
>> +obj-$(CONFIG_SAMSUNG_DEV_KEYPAD)	+= dev-keypad.o
>>
>>  # DMA support
>>
>> diff --git a/arch/arm/plat-samsung/dev-keypad.c
> b/arch/arm/plat-samsung/dev-
>> keypad.c
>> new file mode 100644
>> index 0000000..70e2e2d
>> --- /dev/null
>> +++ b/arch/arm/plat-samsung/dev-keypad.c
>> @@ -0,0 +1,50 @@
>> +/*
>> + * linux/arch/arm/plat-samsung/dev-keypad.c
>> + *
>> + * Copyright (C) 2010 Samsung Electronics Co.Ltd
>> + * Author: Joonyoung Shim <jy0922.shim at samsung.com>
>> + *
>> + *  This program is free software; you can redistribute  it and/or modify
> it
>> + *  under  the terms of  the GNU General  Public License as published by
> the
>> + *  Free Software Foundation;  either version 2 of the  License, or (at
> your
>> + *  option) any later version.
>> + *
>> + */
>> +
>> +#include <linux/platform_device.h>
>> +#include <mach/irqs.h>
>> +#include <mach/map.h>
>> +#include <plat/cpu.h>
>> +#include <plat/devs.h>
>> +#include <plat/keypad.h>
>> +
>> +static struct resource samsung_kp_resources[] = {
> 
> How about samsung_keypad_resources easily to reading?
> 

OK, i will rename from kp to keypad and it needs to change at the keypad
driver too.

>> +	[0] = {
>> +		.start	= SAMSUNG_PA_KEYPAD,
>> +		.end	= SAMSUNG_PA_KEYPAD + 0x20 - 1,
>> +		.flags	= IORESOURCE_MEM,
>> +	},
>> +	[1] = {
>> +		.start	= IRQ_KEYPAD,
>> +		.end	= IRQ_KEYPAD,
>> +		.flags	= IORESOURCE_IRQ,
>> +	},
>> +};
>> +
>> +struct platform_device samsung_device_keypad = {
>> +	.name		= "samsung-keypad",
>> +	.id		= -1,
>> +	.num_resources	= ARRAY_SIZE(samsung_kp_resources),
>> +	.resource	= samsung_kp_resources,
>> +};
>> +
>> +void __init samsung_kp_set_platdata(struct samsung_kp_platdata *pd)
>> +{
>> +	struct samsung_kp_platdata *npd;
>> +
>> +	npd = s3c_set_platdata(pd, sizeof(struct samsung_kp_platdata),
>> +			&samsung_device_keypad);
>> +
>> +	if (!npd->cfg_gpio)
>> +		npd->cfg_gpio = samsung_keypad_cfg_gpio;
>> +}
>> diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-
>> samsung/include/plat/devs.h
>> index 6760999..c06386b 100644
>> --- a/arch/arm/plat-samsung/include/plat/devs.h
>> +++ b/arch/arm/plat-samsung/include/plat/devs.h
>> @@ -100,6 +100,8 @@ extern struct platform_device s5pc100_device_iis0;
>>  extern struct platform_device s5pc100_device_iis1;
>>  extern struct platform_device s5pc100_device_iis2;
>>
>> +extern struct platform_device samsung_device_keypad;
>> +
>>  /* s3c2440 specific devices */
>>
>>  #ifdef CONFIG_CPU_S3C2440
>> diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-
>> samsung/include/plat/keypad.h
>> new file mode 100644
>> index 0000000..d144f42
>> --- /dev/null
>> +++ b/arch/arm/plat-samsung/include/plat/keypad.h
>> @@ -0,0 +1,57 @@
>> +/*
>> + * linux/arch/arm/plat-samsung/include/plat/keypad.h
>> + *
>> + * Copyright (C) 2010 Samsung Electronics Co.Ltd
>> + * Author: Joonyoung Shim <jy0922.shim at samsung.com>
>> + *
>> + * Samsung Platform - Keypad platform data definitions
>> + *
>> + *  This program is free software; you can redistribute  it and/or modify
> it
>> + *  under  the terms of  the GNU General  Public License as published by
> the
>> + *  Free Software Foundation;  either version 2 of the  License, or (at
> your
>> + *  option) any later version.
>> + *
>> + */
>> +
>> +#ifndef __PLAT_SAMSUNG_KEYPAD_H
>> +#define __PLAT_SAMSUNG_KEYPAD_H
>> +
>> +#include <linux/input/matrix_keypad.h>
>> +
>> +#define SAMSUNG_MAX_ROWS	8
>> +#define SAMSUNG_MAX_COLS	8
> 
> Is the MAX really 8?
> 
> S5PV210 & S5PC110 has 2 slots supporting 14 rows * 8 columns and 8 rows * 8
> columns.
> 
> So just SAMSUNG_KEYPAD_ROWS is 8.
> 

Right, but i don't have a board to support 14 rows keypad.
We can add supporting 14 rows keypad later.

>> +
>> +/**
>> + * struct samsung_kp_platdata() - Platform device data for Samsung Keypad
>> + * @keymap_data: pointer to &matrix_keymap_data
>> + * @rows: number of keypad row supported.
>> + * @cols: number of keypad col supported.
>> + * @rep: flag for repeat setting.
>> + * @cfg_gpio: configure the GPIO.
>> + *
>> + * Initialisation data specific to either the machine or the platform
>> + * for the device driver to use or call-back when configuring gpio.
>> + */
>> +struct samsung_kp_platdata {
>> +	const struct matrix_keymap_data	*keymap_data;
>> +	unsigned int		rows;
>> +	unsigned int		cols;
>> +	unsigned int		rep;
>> +
>> +	void	(*cfg_gpio)(unsigned int rows, unsigned int cols);
>> +};
>> +
>> +/**
>> + * samsung_kp_set_platdata - Set platform data for Samsung Keypad device.
>> + * @pd: Platform data to register to device.
>> + *
>> + * Register the given platform data for use with Samsung Keypad device.
>> + * The call will copy the platform data, so the board definitions can
>> + * make the structure itself __initdata.
>> + */
>> +extern void samsung_kp_set_platdata(struct samsung_kp_platdata *pd);
>> +
>> +/* defined by architecture to configure gpio */
>> +extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
>> +
>> +#endif /* __PLAT_SAMSUNG_KEYPAD_H */
>> diff --git a/arch/arm/plat-samsung/include/plat/regs-keypad.h
> b/arch/arm/plat-
>> samsung/include/plat/regs-keypad.h
>> new file mode 100644
>> index 0000000..1a8c046
>> --- /dev/null
>> +++ b/arch/arm/plat-samsung/include/plat/regs-keypad.h
>> @@ -0,0 +1,49 @@
>> +/*
>> + * linux/arch/arm/plat-samsung/include/plat/regs-keypad.h
>> + *
>> + * Copyright (C) 2010 Samsung Electronics Co.Ltd
>> + * Author: Joonyoung Shim <jy0922.shim at samsung.com>
>> + *
>> + *  This program is free software; you can redistribute  it and/or modify
> it
>> + *  under  the terms of  the GNU General  Public License as published by
> the
>> + *  Free Software Foundation;  either version 2 of the  License, or (at
> your
>> + *  option) any later version.
>> + *
>> + */
>> +
>> +#ifndef __SAMSUNG_KEYPAD_H__
>> +#define __SAMSUNG_KEYPAD_H__
>> +
>> +#define SAMSUNG_KEYIFCON	0x00
>> +#define SAMSUNG_KEYIFSTSCLR	0x04
>> +#define SAMSUNG_KEYIFCOL	0x08
>> +#define SAMSUNG_KEYIFROW	0x0c
>> +#define SAMSUNG_KEYIFFC		0x10
>> +
>> +/* SAMSUNG_KEYIFCON */
>> +#define SAMSUNG_INT_F_EN	(1 << 0)
>> +#define SAMSUNG_INT_R_EN	(1 << 1)
>> +#define SAMSUNG_DF_EN		(1 << 2)
>> +#define SAMSUNG_FC_EN		(1 << 3)
>> +#define SAMSUNG_WAKEUPEN	(1 << 4)
> 
> Needs KEYIF in the definition name for avoid confusing.
> 

OK, i will rename it.

>> +
>> +/* SAMSUNG_KEYIFSTSCLR */
>> +#define SAMSUNG_P_INT_MASK	(0xff << 0)
>> +#define SAMSUNG_R_INT_MASK	(0xff << 8)
>> +#define SAMSUNG_R_INT_OFFSET	8
>> +#define S5PV210_P_INT_MASK	(0x3fff << 0)
>> +#define S5PV210_R_INT_MASK	(0x3fff << 16)
>> +#define S5PV210_R_INT_OFFSET	16
>> +
>> +/* SAMSUNG_KEYIFCOL */
>> +#define SAMSUNG_KEYIFCOL_MASK	(0xff << 0)
>> +#define S5PV210_KEYIFCOLEN_MASK (0xff << 8)
>> +
>> +/* SAMSUNG_KEYIFROW */
>> +#define SAMSUNG_KEYIFROW_MASK	(0xff << 0)
>> +#define S5PV210_KEYIFROW_MASK	(0x3fff << 0)
>> +
>> +/* SAMSUNG_KEYIFFC */
>> +#define SAMSUNG_KEYIFFC_MASK	(0x3ff << 0)
>> +
>> +#endif /* __SAMSUNG_KEYPAD_H__ */
>> --
>> 1.7.0.4
> 
> 
> Thanks.
> 
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 




More information about the linux-arm-kernel mailing list