[PATCH 17/18] omap: rx51: Add supplies for the tlv320aic3x codec driver

[Tony Lindgren]

From: Jarkko Nikula <jhnikula at gmail.com>

Upcoming change to tlv320aic3x codec driver require four supplies.
Implement this by connecting analogic supplies to TWL4030 VMMC2 and digital
supplies to TWL4030 VIO.

Signed-off-by: Jarkko Nikula <jhnikula at gmail.com>
Cc: Eduardo Valentin <eduardo.valentin at nokia.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |   60 +++++++++++++++++++++++---
 1 files changed, 53 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 3addfe6..8179d55 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -277,7 +277,7 @@ static struct regulator_consumer_supply rx51_vmmc1_supply = {
 	.dev_name = "mmci-omap-hs.0",
 };
 
-static struct regulator_consumer_supply rx51_vmmc2_supply = {
+static struct regulator_consumer_supply rx51_vaux3_supply = {
 	.supply   = "vmmc",
 	.dev_name = "mmci-omap-hs.1",
 };
@@ -287,6 +287,35 @@ static struct regulator_consumer_supply rx51_vsim_supply = {
 	.dev_name = "mmci-omap-hs.1",
 };
 
+static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
+	/* tlv320aic3x analog supplies */
+	{
+		.supply		= "AVDD",
+		.dev_name	= "2-0018",
+	},
+	{
+		.supply		= "DRVDD",
+		.dev_name	= "2-0018",
+	},
+	/* Keep vmmc as last item. It is not iterated for newer boards */
+	{
+		.supply		= "vmmc",
+		.dev_name	= "mmci-omap-hs.1",
+	},
+};
+
+static struct regulator_consumer_supply rx51_vio_supplies[] = {
+	/* tlv320aic3x digital supplies */
+	{
+		.supply		= "IOVDD",
+		.dev_name	= "2-0018"
+	},
+	{
+		.supply		= "DVDD",
+		.dev_name	= "2-0018"
+	},
+};
+
 static struct regulator_init_data rx51_vaux1 = {
 	.constraints = {
 		.name			= "V28",
@@ -338,7 +367,7 @@ static struct regulator_init_data rx51_vaux3_mmc = {
 					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.consumer_supplies	= &rx51_vaux3_supply,
 };
 
 static struct regulator_init_data rx51_vaux4 = {
@@ -380,8 +409,8 @@ static struct regulator_init_data rx51_vmmc2 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc2_supplies),
+	.consumer_supplies	= rx51_vmmc2_supplies,
 };
 
 static struct regulator_init_data rx51_vsim = {
@@ -411,6 +440,20 @@ static struct regulator_init_data rx51_vdac = {
 	},
 };
 
+static struct regulator_init_data rx51_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vio_supplies),
+	.consumer_supplies	= rx51_vio_supplies,
+};
+
 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 {
 	/* FIXME this gpio setup is just a placeholder for now */
@@ -618,6 +661,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vmmc1			= &rx51_vmmc1,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
+	.vio			= &rx51_vio,
 };
 
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
@@ -638,12 +682,14 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 static int __init rx51_i2c_init(void)
 {
 	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
-	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3) {
 		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
-	else {
+		/* Only older boards use VMMC2 for internal MMC */
+		rx51_vmmc2.num_consumer_supplies--;
+	} else {
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
-		rx51_twldata.vmmc2 = &rx51_vmmc2;
 	}
+	rx51_twldata.vmmc2 = &rx51_vmmc2;
 	omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,