[PATCH 2/4] mx25: Add flexcan devices
Marc Kleine-Budde
mkl at pengutronix.de
Fri May 28 07:42:16 EDT 2010
From: Sascha Hauer <s.hauer at pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
---
arch/arm/mach-mx25/devices.c | 38 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-mx25/devices.h | 2 ++
2 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 3a405fa..e8b320b 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -390,6 +390,44 @@ struct platform_device mxc_i2c_device2 = {
.resource = mxc_i2c_3_resources,
};
+static struct resource mxc_can_1_resources[] = {
+ {
+ .start = 0x43f88000,
+ .end = 0x43f8bfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 43,
+ .end = 43,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_can_device0 = {
+ .name = "flexcan",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_can_1_resources),
+ .resource = mxc_can_1_resources,
+};
+
+static struct resource mxc_can_2_resources[] = {
+ {
+ .start = 0x43f8c000,
+ .end = 0x43f8ffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 44,
+ .end = 44,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_can_device1 = {
+ .name = "flexcan",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_can_2_resources),
+ .resource = mxc_can_2_resources,
+};
+
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index cee12c0..e3267d6 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -22,3 +22,5 @@ extern struct platform_device mxc_nand_device;
extern struct platform_device mx25_rtc_device;
extern struct platform_device mx25_fb_device;
extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_can_device0;
+extern struct platform_device mxc_can_device1;
--
1.7.1
More information about the linux-arm-kernel
mailing list