[PATCH 1/8] pxa/colibri270: Refactor board definition file
Eric Miao
eric.y.miao at gmail.com
Wed May 26 09:56:27 EDT 2010
On Sat, May 22, 2010 at 6:29 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
> This patch just moves code around and polishes it. Also, compile in only
> selected pieces of hardware.
>
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
Applied.
> ---
> arch/arm/mach-pxa/colibri-pxa270.c | 69 ++++++++++++++++++------------
> arch/arm/mach-pxa/include/mach/colibri.h | 9 +---
> 2 files changed, 43 insertions(+), 35 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
> index 061c453..4519e89 100644
> --- a/arch/arm/mach-pxa/colibri-pxa270.c
> +++ b/arch/arm/mach-pxa/colibri-pxa270.c
> @@ -3,6 +3,7 @@
> *
> * Support for Toradex PXA270 based Colibri module
> * Daniel Mack <daniel at caiaq.de>
> + * Marek Vasut <marek.vasut at gmail.com>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> @@ -36,23 +37,25 @@
> #include "generic.h"
> #include "devices.h"
>
> -/*
> - * GPIO configuration
> - */
> +/******************************************************************************
> + * Pin configuration
> + ******************************************************************************/
> static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
> + /* Ethernet */
> GPIO78_nCS_2, /* Ethernet CS */
> GPIO114_GPIO, /* Ethernet IRQ */
> };
>
> -/*
> - * NOR flash
> - */
> +/******************************************************************************
> + * NOR Flash
> + ******************************************************************************/
> +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
> static struct mtd_partition colibri_partitions[] = {
> {
> .name = "Bootloader",
> .offset = 0x00000000,
> .size = 0x00040000,
> - .mask_flags = MTD_WRITEABLE /* force read-only */
> + .mask_flags = MTD_WRITEABLE /* force read-only */
> }, {
> .name = "Kernel",
> .offset = 0x00040000,
> @@ -90,42 +93,50 @@ static struct platform_device colibri_pxa270_flash_device = {
> .num_resources = 1,
> };
>
> -/*
> - * DM9000 Ethernet
> - */
> -#if defined(CONFIG_DM9000)
> -static struct resource dm9000_resources[] = {
> +static void __init colibri_pxa270_nor_init(void)
> +{
> + platform_device_register(&colibri_pxa270_flash);
> +}
> +#else
> +static inline void colibri_pxa270_nor_init(void) {}
> +#endif
> +
> +/******************************************************************************
> + * Ethernet
> + ******************************************************************************/
> +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
> +static struct resource colibri_pxa270_dm9000_resources[] = {
> [0] = {
> - .start = COLIBRI_PXA270_ETH_PHYS,
> - .end = COLIBRI_PXA270_ETH_PHYS + 3,
> + .start = PXA_CS2_PHYS,
> + .end = PXA_CS2_PHYS + 3,
> .flags = IORESOURCE_MEM,
> },
> [1] = {
> - .start = COLIBRI_PXA270_ETH_PHYS + 4,
> - .end = COLIBRI_PXA270_ETH_PHYS + 4 + 500,
> + .start = PXA_CS2_PHYS + 4,
> + .end = PXA_CS2_PHYS + 4 + 500,
> .flags = IORESOURCE_MEM,
> },
> [2] = {
> - .start = COLIBRI_PXA270_ETH_IRQ,
> - .end = COLIBRI_PXA270_ETH_IRQ,
> + .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
> + .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
> .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
> },
> };
>
> -static struct platform_device dm9000_device = {
> +static struct platform_device colibri_pxa270_dm9000_device = {
> .name = "dm9000",
> .id = -1,
> - .num_resources = ARRAY_SIZE(dm9000_resources),
> - .resource = dm9000_resources,
> + .num_resources = ARRAY_SIZE(colibri_pxa270_dm9000_resources),
> + .resource = colibri_pxa270_dm9000_resources,
> };
> -#endif /* CONFIG_DM9000 */
>
> -static struct platform_device *colibri_pxa270_devices[] __initdata = {
> - &colibri_pxa270_flash_device,
> -#if defined(CONFIG_DM9000)
> - &dm9000_device,
> +static void __init colibri_pxa270_eth_init(void)
> +{
> + platform_device_register(&colibri_pxa270_dm9000_device);
> +}
> +#else
> +static inline void colibri_pxa270_eth_init(void) {}
> #endif
> -};
>
> static void __init colibri_pxa270_init(void)
> {
> @@ -133,7 +144,9 @@ static void __init colibri_pxa270_init(void)
> pxa_set_ffuart_info(NULL);
> pxa_set_btuart_info(NULL);
> pxa_set_stuart_info(NULL);
> - platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
> +
> + colibri_pxa270_nor_init();
> + colibri_pxa270_eth_init();
> }
>
> MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
> diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
> index 5f2ba8d..9e47e1f 100644
> --- a/arch/arm/mach-pxa/include/mach/colibri.h
> +++ b/arch/arm/mach-pxa/include/mach/colibri.h
> @@ -33,13 +33,8 @@ static inline void colibri_pxa3xx_init_nand(void) {}
> /* physical memory regions */
> #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
>
> -/* definitions for Colibri PXA270 */
> -
> -#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
> -#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */
> -#define COLIBRI_PXA270_ETH_IRQ_GPIO 114
> -#define COLIBRI_PXA270_ETH_IRQ \
> - gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
> +/* GPIO definitions for Colibri PXA270 */
> +#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114
>
> #endif /* _COLIBRI_H_ */
>
> --
> 1.7.0
>
>
More information about the linux-arm-kernel
mailing list