March 2011 Archives by thread
Starting: Tue Mar 1 00:58:49 EST 2011
Ending: Wed Mar 23 15:55:37 EDT 2011
Messages: 2723
- [PATCH 2/5] ARM: gic: Add distributor and interface enable/disable accessory api
Santosh Shilimkar
- [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c
Tomi Valkeinen
- [PATCH 1/2] ARM imx53: add pwm devices support
Jason Chen
- [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device
Jason Chen
- [PATCH 1/1] GPIO support for WM8505
Tony Prisk
- [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage
Nicolas Pitre
- [PATCH 2/4] ARM:boot:device tree: Merge specific atags into the device tree
Nicolas Pitre
- [PATCH 4/4] ARM:boot:device tree: Allow multiple device trees to be appended to zImage
Nicolas Pitre
- [PATCH v2 5/9] OMAP2+: hwmod: rename some init functions
DebBarma, Tarun Kanti
- [PATCH v2 02/13] da850: pruss platform specific additions.
Subhasish Ghosh
- [PATCH v2 2/4] msm: iommu: Rework clock logic and add IOMMU bus clock control
Trilok Soni
- [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs
Alexander Stein
- [PATCH 1/4] ASoC: Add TI tlv320aic32x4 codec support.
javier Martin
- [RFC] device.h: add device_set_platdata routine
Uwe Kleine-König
- [RFC PATCH] ARM: Use generic BUG() handler
Russell King - ARM Linux
- [PATCH 3/8] Add a mfd IPUv3 driver
Sascha Hauer
- [PATCH 1/3] ARM: S5P: Add s5p_timer support for HRT
Sylwester Nawrocki
- [PATCH] arm: mxs: add irq_chip-name for GPIO IRQs
Wolfram Sang
- [PATCH v2] plat-mxc: Provide irq_chip name for GPIO IRQs
Alexander Stein
- [PATCH 1/2] ARM imx53: add pwm devices support
Jason Chen
- [PATCH 3/8] Add a mfd IPUv3 driver
Sascha Hauer
- [PATCH v6 1/1] PRUSS UIO driver support
Thomas Gleixner
- Linux support for Samsung S3C2510A Processor
Madhavi Manchala
- [PATCH v6 1/1] PRUSS UIO driver support
Thomas Gleixner
- [PATCH V4 1/4] ARM: imx53_loco: add esdhc device support
Richard Zhu
- [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display
Cousson, Benoit
- [PATCH 1/4] msm: scm: Mark inline asm as volatile
Will Deacon
- [PATCH 2/4] msm: scm: Fix improper register assignment
Will Deacon
- [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip
Thomas Gleixner
- [PATCH V5 00/63] Updating SPEAr Support
viresh kumar
- [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes
Viresh Kumar
- [PATCH V6 00/11] SPEAr3xx & SPEAr6xx: Single Image solution and padmux updates
Viresh Kumar
- [PATCH V6 00/10] Adding SPEAr13xx support
Viresh Kumar
- [PATCH V6 01/10] ST SPEAr13xx: Adding machine specific header files
Viresh Kumar
- [PATCH V6 00/17] Adding devices support for all spear machines
Viresh Kumar
- [PATCH V6 01/17] ST SPEAr13xx: Added ARM PL061 GPIO Support
Viresh Kumar
- [PATCH V6 0/3] Clock Framework & CPU Freq Updates
Viresh Kumar
- [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53
Wolfram Sang
- [PATCH 3/6] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip
Sergei Shtylyov
- [PATCH 4/6] ARM: s5pv310: update IRQ combiner to use EOI in parent chip
Sergei Shtylyov
- [PATCH 0/3] arm: support pmu irq routed from CTI
tom.leiming at gmail.com
- [RFC] MMC: error handling improvements
Sahitya Tummala
- [PATCH v2 13/13] tty: pruss SUART driver
Subhasish Ghosh
- [PATCH] mach-ux500: activate fix for errata 753970
Linus Walleij
- [PATCH 2/4] msm: scm: Fix improper register assignment
Will Deacon
- No subject
Javier Martin
- [PATCH] mach-ux500: activate USB in the U8500 defconfig
Linus Walleij
- [PATCH 2/3] arm: pmu: support pmu irq routed from CTI
Ming Lei
- [PATCH] audio:am3517evm support for AIC23
Abhilash K V
- [PATCH 0/3] OMAP2+ hwmod fixes
Cousson, Benoit
- [patch v1 0/3] arm: support pmu irq routed from CTI
tom.leiming at gmail.com
- resend hsudc patches for s3c24xx?
Heiko Stübner
- [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used
Sergei Shtylyov
- [GIT PULL] omap fixes for v2.6.38-rc6
Aaro Koskinen
- [RFC PATCH] ARM: Use generic BUG() handler
Dave Martin
- [PATCH v6 1/1] PRUSS UIO driver support
Hans J. Koch
- [PATCH] ARM: enable CONFIG_KTIME_SCALAR
Rob Herring
- Fwd: [RFC] MMC: error handling improvements
Murali Krishna Palnati
- MMC quirks relating to performance/lifetime.
Jens Axboe
- [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file
Sricharan R
- [PATCH] omap:iommu-added cache flushing operation for L2 cache
Fernando Guzman Lugo
- [PATCH 1/5] ARM: mx35_3ds: Add I2C support
Fabio Estevam
- [PATCH 4/5] ARM: mx25_3ds: Add I2C support
Fabio Estevam
- [RFC PATCH 5/5] RFC: msm: sps: Smart Peripheral System (SPS) driver.
David Brown
- [PATCH] S3C64XX: Fix keypad setup to configure correct number of rows
Mark Brown
- [PATCH 0/2] 3 build failures in imx-for-2.6.39
Uwe Kleine-König
- [RFC PATCH] ARM: Use generic BUG() handler
Russell King - ARM Linux
- [PATCH 1/2] ARM: iomux-imx31: mark pin_list as const
Uwe Kleine-König
- [patch 1/2] mc13892: reboot on wdi event
Liam Girdwood
- [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
Kevin Hilman
- [PATCH] ARM: mx5: forbid building i.MX51 with any of i.MX50 or i.MX53
Uwe Kleine-König
- [PATCH v7 0/1] Add PRUSS UIO driver support
Pratheesh Gangadhar
- [PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE
Kevin Hilman
- [PATCH 0/2] OMAP3: cpuidle: prevent CORE pwrdm from entering low-power state when DSS active
Paul Walmsley
- [GIT PULL] OMAP PM fixes for 2.6.38-rc
Kevin Hilman
- [PATCH] OMAP2+: hwmod: use status bit info for reset line
Omar Ramirez Luna
- [PATCH 2/6] ARM: pxa2xx: reorganize I2C files
Ben Dooks
- [PATCH 3/6] i2c-pxa2xx: Add PCI support for PXA I2C controller
Ben Dooks
- [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data
Andrei Warkentin
- [PATCH] ARM: imx/mx25_3ds: Fix build failure
Fabio Estevam
- [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board
Donghwa Lee
- CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness
Saravana Kannan
- Store buffer and l2x0_cache_sync
Colin Cross
- Common suspend and resume with L2 cache on
Colin Cross
- [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums
Dima Zavin
- [PATCH 2/6] ARM: pxa2xx: reorganize I2C files
Eric Miao
- [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X
Richard Zhao
- [PATCH v3 0/2] msm: add single-wire serial bus interface (SSBI) driver
Kenneth Heitke
- [PATCH] msm: Add SSBI support for MSM8960
Kenneth Heitke
- [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads
Varadarajan, Charulatha
- [PATCH V2 2/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S3C6410
Banajit Goswami
- [PATCH V2 5/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PC100
Banajit Goswami
- [PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT
Kukjin Kim
- [PATCH] MX1: Add structure, registration functions for framebuffer and rename LCDC INT
Gwenhael Goavec-Merou
- [PATCH] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices
Mark Brown
- [PATCH V5 1/6] ARM: imx51/53: add sdhc3/4 clock
Richard Zhu
- [PATCH V5 2/6] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS
Richard Zhu
- [PATCH V5 5/6] mmc: sdhci-esdhc: enable esdhc on imx53
Richard Zhu
- [PATCH V5 6/6] ARM: imx53_loco: add esdhc device support
Richard Zhu
- [PATCH] ARM: mxs/mx28evk: add flexcan devices
Shawn Guo
- [PATCH v2 00/18] OMAP3+: PM: introduce SR class 1.5
Nishanth Menon
- [patch v2 0/3] arm: pmu: support pmu/perf on OMAP4
tom.leiming at gmail.com
- [PATCH] i.MX some patches
Sascha Hauer
- [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads
Govindraj.R
- [PATCH v8 0/1] Add PRUSS UIO driver support
Pratheesh Gangadhar
- [PATCH 0/3] ARM: tegra: PCI-e improvements
Mike Rapoport
- [PATCH 1/3] ARM: tegra: PCIE minor code refactoring
Mike Rapoport
- [PATCH] ARM: mx3/mx35_3ds: Use MX35 USB OTG Erratum
Fabio Estevam
- [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling
Ming Lei
- Question about free_pgd_slow ?
Rabin Vincent
- [PATCH v5] dmaengine: mxs-dma: add dma support for i.MX23/28
Koul, Vinod
- [PATCH 1/2] ARM: mx5/mx53_smd: Fix IOMUX for UART2
Fabio Estevam
- [PATCH 0/8 resend] dw_dmac: Extending support & minor fixes
Koul, Vinod
- [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32
Koul, Vinod
- [RFC PATCH 00/20] A15 architected timer support
Marc Zyngier
- [PATCH 1/1] davinci: changed SRAM allocator to shared ram.
Nori, Sekhar
- [PATCHv1] ARM: imx: Add support for low power suspend on MX51.
Dinh.Nguyen at freescale.com
- [PATCH/RFC 0/3] ARM: S5P: Add common DPHY control code for MIPI-CSIS/MIPI-DSIM devices
Sylwester Nawrocki
- [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods
Tony Lindgren
- [PATCH 4/8 resend] dw_dmac: calling dwc_scan_descriptors from dwc_tx_status() after taking lock
Koul, Vinod
- [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC
H Hartley Sweeten
- [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish
Koul, Vinod
- [PATCH 7/8 resend] dw_dmac.c: Pass Channel Allocation Order from platform_data
Koul, Vinod
- [patch v2 0/2] Get watchdog reboot working on efika smartbook
Arnaud Patard (Rtp)
- [PATCH 8/8 resend] dw_dmac.c: Pass Channel Priority from platform_data
Koul, Vinod
- [patch 1/1] t5325: add audio support
Arnaud Patard (Rtp)
- about MISC_DEVICES not being enabled in many defconfigs
Uwe Kleine-König
- [PATCH 0/4] Initial patches for MSM display update
Carl Vanderlip
- [patch 1/1] t5325: add audio support
Arnaud Patard (Rtp)
- [PATCH 01/17] omap4: pm: Add omap WakeupGen module support
Kevin Hilman
- [PATCH 02/17] omap4: pm: Add SAR RAM support
Kevin Hilman
- [PATCH 03/17] omap4: Export scu base address
Kevin Hilman
- [PATCH 04/17] omap4: pm: Add CPUx OFF mode support
Kevin Hilman
- [Qualcomm PM8921 MFD 0/6] *** SUBJECT HERE ***
adharmap at codeaurora.org
- [PATCHv2] omap:mailbox: resolve hang issue
Armando Uribe
- [PATCH 05/17] omap4: pm: Initialise all the clockdomains to supported states
Kevin Hilman
- [Qualcomm PM8921 MFD 0/6] pmic 8921 core and subdevices
adharmap at codeaurora.org
- [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes
Kevin Hilman
- [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver
Mark Brown
- [PATCH 08/17] omap4: pm: Add GIC save/restore support
Kevin Hilman
- [PATCH 09/17] omap4: pm: Add WakeupGen save/restore support
Kevin Hilman
- [PATCH 10/17] omap4: pm: Add L2 cache lowpower support
Kevin Hilman
- [PATCH] arm: etm: fix section mismatch warning
tom.leiming at gmail.com
- [PATCH] arm: omap: fix section mismatch warning
tom.leiming at gmail.com
- [PATCH 11/17] omap4: suspend: Add MPUSS RET and OFF support
Kevin Hilman
- [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support
Mark Brown
- [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers
Joe Perches
- [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters
Kevin Hilman
- [PATCH 13/17] omap4: cpuidle: Basic CPUidle support
Kevin Hilman
- [PATCH 14/17] omap4: cpuidle: Add MPUSS RET OFF states
Kevin Hilman
- [PATCH 16/17] omap4: cpuidle: Allow debugfs control through enable_off_mode
Kevin Hilman
- [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes
Kevin Hilman
- [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support
Kevin Hilman
- [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
Kevin Hilman
- [PATCH] perf: add OMAP support for the new power events
Kevin Hilman
- [PATCH] ldp: Fix regulator mapping for ads7846 TS controller
Tony Lindgren
- [PATCH] ARM: mx51: Print silicon revision on boot
Fabio Estevam
- [PATCH 0/6] omap3: pm: Fixes for low power code
Kevin Hilman
- [PATCH v2] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board
Kukjin Kim
- [PATCH] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board
Kyungmin Park
- [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear
Lei Wen
- [PATCH V5 6/6] pxa3xx_nand: clean the keep configure code
Lei Wen
- [PATCH V5 Resend] ST SPEAr: PCIE gadget suppport
pratyush
- [PATCH] ST SPEAr: PCIe Gadget: Documentation for support of multiple device
Pratyush Anand
- [PATCH 0/2] Common struct clk implementation, v14
Jeremy Kerr
- [PATCH 1/2] Add a common struct clk
Jeremy Kerr
- [PATCH 2/2] clk: Generic support for fixed-rate clocks
Jeremy Kerr
- [PATCH] ARM: EXYNOS4: Add ARMLEX4210 Board support file
ALIM AKHTAR
- [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration
Kukjin Kim
- [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration
Kukjin Kim
- [PATCH 1/1] CPU Frequency Scaling for VT8500/WM8505
Tony Prisk
- [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X
Richard Zhao
- [PATCH 2/2] ARM: imx3x: clean up ARCH_MX3X
Richard Zhao
- [PATCH V2 00/13] dmaengine/dw_dmac: Extending support & minor fixes
Viresh Kumar
- [PATCH V2 01/13] dw_dmac: Remove compilation dependency from AVR32 and put on HAVE_CLK
Viresh Kumar
- [PATCH V2 02/13] dw_dmac: Replace module_init() with subsys_initcall()
Viresh Kumar
- [PATCH] perf: add OMAP support for the new power events
Jean Pihet
- [patch v3 0/3] arm: pmu: support pmu/perf on OMAP4
tom.leiming at gmail.com
- [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X
Shawn Guo
- clcdfb: Question about clcdfb_check() routine
vksamar
- [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour
Dave Martin
- Compiling a kernel for armv5 + armv6
Sascha Hauer
- [PATCH] remove kconfig dependencies from ARCH_MX*/MACH_MX*
Sascha Hauer
- [PATCH 1/6] media/video i.MX: use IMX_HAVE_PLATFORM_* macros
Sascha Hauer
- [PATCH 6/6] mmc i.MX sdhci: use IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX to depend on
Sascha Hauer
- hard coded value for idcode field in struct cpu_table
Madhavi Manchala
- [PATCH 0/4] OMAP 3 and 4 i2c fixes
Andy Green
- [PATCH v2] ARM: mxs/mx28evk: add flexcan devices
Shawn Guo
- [PATCH 0/7] Various Samsung updates
Mark Brown
- rmk out of action until further notice
Russell King - ARM Linux
- [PATCH v3 0/3] OMAP: DSS2: Fix for DISPC core functional clock divider
Raghuveer Murthy
- [PATCH v3 1/3] OMAP: DSS2: Adding dss_features for independent core clk divider
Raghuveer Murthy
- Memory Compaction feature.
Ralf Baechle
- [PATCH v9 0/1] Add PRUSS UIO driver support
Pratheesh Gangadhar
- [GIT PULL] ux500,u300,nomadik core changes for 2.6.39
Linus Walleij
- [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support
Kevin Hilman
- [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support
David Miller
- [PATCH] ARM: mxc91231: select MXC_AVIC
Uwe Kleine-König
- [PATCH v2] ARM: mx51: Print silicon revision on boot
Fabio Estevam
- [PATCH v3] ARM: mx51: Print silicon revision on boot
Fabio Estevam
- [PATCH v2] OMAP2PLUS: Replace voltage values with Macros
Nishanth Menon
- [PATCH] omap3: cpuidle: Add description field to each C-state.
Kevin Hilman
- [PATCH] ARM: Samsung: change suspend/resume code to depend on CONFIG_SUSPEND
Kyungmin Park
- [PATCH 1/2] ARM imx53: add pwm devices support
Jason Chen
- Recall: [PATCH 1/2] ARM imx53: add pwm devices support
Chen Jie-B02280
- [PATCH] ARM: mx53/loco: add pwm backlight device
Jason Chen
- [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X
Shawn Guo
- [PATCH 0/2] add Samsung SoC based MIPI-DSI support.
InKi Dae
- [PATCH v10 0/1] Add PRUSS UIO driver support
Pratheesh Gangadhar
- [PATCH] Exynos4: Basic CPUidle support
Kyungmin Park
- [PATCH] Exynos4: Remove meaningless REGULATOR config option
Kyungmin Park
- [PATCH V2 0/3] ARM: S5P: Add HRT support for s5p series
Sangbeom Kim
- staging: iio: ak8975: make gpio platdata mandatory
Naveen Krishna Ch
- [PATCH] OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interface
Paul Walmsley
- [PATCH] ARM: EXYNOS4: Adds Samsung NURI board support
Kukjin Kim
- [PATCH] mmci: separate out ST Micro register defines
Linus Walleij
- [PATCH/RFC 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update
Marek Szyprowski
- [PATCH 1/7] ARM: S5PV310: Add platform definitions for FIMC
Marek Szyprowski
- [PATCH] dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel
Viresh Kumar
- [PATCHv4 0/4] ARM: Fixing udelay() for SMP and non-SMP systems
Linus Walleij
- [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers
Linus Walleij
- [PATCH v2] ARM: Thumb-2: Add local symbols to work around gas behaviour
Dave Martin
- CHROMIUM: arm: tegra: Add platfrom devices for Cypress trackpad (issue6623011)
dudl at cypress.com
- [PATCH] OMAP4: clockdomain: Follow recommended enable sequence
Rajendra Nayak
- [PATCH] i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup
Rajendra Nayak
- [PATCH] ARM: fix compile error in tlb.h
Linus Walleij
- [PATCH 0/2] OMAP: PM: implement devices wakeup latency constraints APIs
Jean Pihet
- [PATCH 1/2] OMAP PM: create a PM layer plugin for the devices wakeup latency constraints
Jean Pihet
- [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs
Jean Pihet
- [PATCH 1/2] Revert "OMAP4: hwmod data: Prevent timer1 to be reset and idle during init"
Benoit Cousson
- [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes
Dave Martin
- [PATCH] MAINTAINERS: Update MSM maintainers
Pavel Machek
- [PATCH] ARM: mx51_efika: update platform data for new mfd changes
Andres Salomon
- PXA270 Random Hangs at Low Core Freq
Vasily Khoruzhick
- [PATCH] [ARM] MX1: Add ARMadeus Systems APF9328 board support
Gwenhael Goavec-Merou
- [PATCH 0/6] move mach-mx3/* to mach-imx
Uwe Kleine-König
- [PATCH 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile
Sheetal Sahasrabudhe
- [PATCH 1/3] msm: Add support for Scorpion and ScorpionMP PMU
Sheetal Sahasrabudhe
- [PATCH 2/3] [ARM] perfevents: Add support for Scorpion performance monitors
Sheetal Sahasrabudhe
- [PATCH 3/3] [ARM] Oprofile: Add Qualcomm Scorpion and ScorpionMP CPU type
Sheetal Sahasrabudhe
- [PATCH] OMAP1: McBSP: fix build break for non-multi-OMAP1 configs
Paul Walmsley
- [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode
Paul Walmsley
- [PATCH v11 0/1] Add PRUSS UIO driver support
Pratheesh Gangadhar
- [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI
Dinh.Nguyen at freescale.com
- [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver
Kevin Hilman
- [PATCH 1/2] ARM: Add TS-7800 revisions 6-9
Michael Spang
- Tegra ASoC board patches for 2.6.39
Stephen Warren
- [PATCH 0/5] ARM: Tegra: Enable audio (boards-for-next-i2c)
Stephen Warren
- [PATCH 0/3] ARM: Tegra: Enable audio (boards-for-next)
Stephen Warren
- [PATCH 1/3] ARM: Tegra: Add devices.c entries for audio
Stephen Warren
- [PATCH V2 0/3]: OMAP4: Update OPP Table and Voltage Rail Values
Shweta Gulati
- [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
Shweta Gulati
- [PATCH V2 2/3] OMAP4: Update Voltage Rail Values for MPU/IVA
Shweta Gulati
- [PATCH V2 3/3] OMAP4: Add IVA OPP enteries.
Shweta Gulati
- [PATCH v3] OMAP3+: OPP: Replace voltage values with Macros
Nishanth Menon
- [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions
Alexander Clouter
- [PATCH] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx
Alexander Clouter
- [PATCH] [ARM] orion5x: fix compiler cast warnings in ts78xx-setup.c
Alexander Clouter
- [PATCH V3 00/19] OMAP3+: PM: introduce SR class 1.5
Nishanth Menon
- A few mxsfb patches
Shawn Guo
- [PATCH] ARM: mxs/tx28: fix up LCD pads
Shawn Guo
- [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards
Shawn Guo
- [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions
Nicolas Pitre
- [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions
Michael Spang
- [PATCH v2 1/3] ARM: PXA: PXAFB: Fix double-free issue
Vasily Khoruzhick
- Git pull request: Orion/Kirkwood updates for next merge window
Nicolas Pitre
- [PATCH] ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c
Alexander Clouter
- [PATCH 0/2] ARM: tegra: Add Toshiba AC100 support
Marc Dietrich
- [PATCH 0/4] Continue the mx31_3ds machine support
Alberto Panizzo
- [PATCH] [ARM] tlb: fix build error with CONFIG_SWAP=n
Dmitry Eremin-Solenikov
- [PATCH v2 0/2] ARM: tegra: Add Toshiba AC100 support
Marc Dietrich
- [PATCH V3 0/3] ARM: S5P: Add HRT support for s5p series
Sangbeom Kim
- [PATCH v2] ARM: EXYNOS4: enabled lcd and backlight in NURI board
Donghwa Lee
- [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU
KyongHo Cho
- [PATCH v3] serial: msm_serial_hs: Add MSM high speed UART driver
Mayank Rana
- [PATCH v3] serial: msm_serial_hs: Add MSM high speed UART driver
Mayank Rana
- [PATCH 1/2] [ARM] am200epd: fix resource leak in am200_init_gpio_regs error path
Axel Lin
- [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it
Kukjin Kim
- [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it
Lars-Peter Clausen
- [PATCH 1/2] USB: s3c2410_udc: Add common implementation for GPIO controlled pullups
Lars-Peter Clausen
- [PATCH v2 0/4] OMAP: iommu: hwmod support and runtime PM
Omar Ramirez Luna
- [PATCH 0/3] Tegra i2c board changes + defconfig update
Olof Johansson
- [PATCH v3] ARM: EXYNOS4: enabled lcd and backlight in NURI board
Donghwa Lee
- ALSA issue on DA850/OMAP-L138/AM18x
Christophe Aeschlimann
- [PATCH 1/2] mtd: nand: Allow NAND chip ids to be included standalone.
Artem Bityutskiy
- [PATCHv2 0/4] Continue the mx31_3ds machine support
Alberto Panizzo
- [PATCH] ARM: imx/mx25: fix (again) spi device registration typo
Baruch Siach
- [PATCH 1/2] ARM: fix compiling error due to debug_info change
Bryan Wu
- [PATCH] ARM: imx: Add tlv320aic32x4 board specific code to Visstrim_M10.
Javier Martin
- [PATCH 1/2] ARM: l2x0: Errata fix for flush by Way operationcan cause data corruption
Will Deacon
- [PATCH] ARM: imx/mx25: dynamically allocate pwm devices
Baruch Siach
- [PATCH v1 1/1] davinci: macro rename DA8XX_LPSC0_DMAX to DA8XX_LPSC0_PRUSS.
Subhasish Ghosh
- Question about free_pgd_slow ?
Rabin Vincent
- [PATCH] ARM: tegra: trimslice: enable MMC/SD slots
Mike Rapoport
- [PATCH] msm: gpio-v2: Add missing BIT field macros for interrupt control
Rohit Vaswani
- [PATCHv2 1/3] msm: Remove arch-specific gpiomux tables
Rohit Vaswani
- [PATCHv2 2/3] msm: gpiomux: decentralize and modularize gpiomux init.
Rohit Vaswani
- [PATCHv2 3/3] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums
Rohit Vaswani
- [GIT PULL] Remaining omap fixes for 2.6.37-r7
Tony Lindgren
- [PATCH v2 0/2] ARM: tegra: Add Toshiba AC100 support
Marc Dietrich
- [PATCH v2 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile
Sheetal Sahasrabudhe
- [PATCH v2 1/3] msm: Add support for Scorpion and ScorpionMP PMU
Sheetal Sahasrabudhe
- [PATCH v2 2/3] [ARM] perfevents: Add support for Scorpion performance monitors
Sheetal Sahasrabudhe
- [PATCH v2 3/3] [ARM] Oprofile: Add Qualcomm Scorpion and ScorpionMP CPU type
Sheetal Sahasrabudhe
- [GIT PULL] Samsung fixes for 2.6.38-rc8
Kukjin Kim
- [PATCH v2] ARM: tegra: seaboard: register i2c devices
Olof Johansson
- [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.
Murali Nalajala
- [PATCH 0/3] OMAP2+: powerdomain: add fn to determine whether pwrdm is always on
Paul Walmsley
- [PATCH 1/3] OMAP2/3: WKUP powerdomain: mark as being always on
Paul Walmsley
- [PATCH 3/3] OMAP2+: powerdomain: add pwrdm_can_ever_lose_context()
Paul Walmsley
- [PATCH] Exynos4: Add HSMMC channel 4 support
Kyungmin Park
- [PATCH V6 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS
Richard Zhu
- [PATCH V6 4/4] mmc: sdhci-esdhc: enable esdhc on imx53
Richard Zhu
- [PATCH 0/5] OMAP2+: hwmod: miscellaneous fixes for 2.6.39
Paul Walmsley
- [Qualcomm PM8921 MFD v2 0/6] pmic 8921 core and subdevices
adharmap at codeaurora.org
- [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel
Jean-Christophe PLAGNIOL-VILLARD
- MMC quirks relating to performance/lifetime.
Pavel Machek
- Amba CLCD register definitions
Michael Hunold
- [GIT PULL]: TrimSlice update
Mike Rapoport
- [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator
Linus Walleij
- SMP soft lockup on smp_call_function_many when doing flush_tlb_page
saeed bishara
- [PATCH 1/2] ARM: mx28: set proper parent for lcdif clock
Shawn Guo
- [PATCH 2/2] ARM: mxs/mx28evk: add framebuffer device
Shawn Guo
- [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump
Will Deacon
- [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver
Andy Green
- [PATCH] OMAP2+: hwmod data: add correct functionality flags to all omap2plus i2c dev_attr
Andy Green
- [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support
Thomas Gleixner
- [PATCH 0/3] Harmony PCI-e and regulators
Mike Rapoport
- [PATCH v3 0/7] pruss mfd drivers
Subhasish Ghosh
- [PATCHv6 0/5] ARM: add initial support for Picochip picoXcell SoC
Jamie Iles
- [PATCH] audio : AM3517 : Adding i2c info for AIC23 codec
Abhilash K V
- [PATCH] plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
Linus Walleij
- [patch v4 0/3] arm: pmu: support pmu/perf on OMAP4
tom.leiming at gmail.com
- [PATCH v3 0/7] Migrate GIC to fasteoi flow control
Will Deacon
- [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers
Will Deacon
- [PATCH 3/7] ARM: tegra: update GPIO chained IRQ handler to use entry/exit functions
Will Deacon
- [PATCH 5/7] ARM: msm: update GPIO chained IRQ handler to use entry/exit functions
Will Deacon
- [PATCH 6/7] ARM: nmk: update GPIO chained IRQ handler to entry/exit functions
Will Deacon
- [PATCH v2] [ARM] MX1: Add ARMadeus Systems APF9328 board support
Gwenhael Goavec-Merou
- [Qualcomm PM8921 MFD v2 1/6] mfd: pm8921: Add PMIC 8921 core driver
Randy Dunlap
- [PATCH v3 2/3] [ARM] perfevents: Add support for Scorpion performance monitors
Sheetal Sahasrabudhe
- [PATCH v3 7/7] tty: add pruss SUART driver
Randy Dunlap
- [PATCH v3 1/2] MAINTAINERS: Add drivers/platform/msm to MSM subsystem
Kenneth Heitke
- [PATCHv3 3/9] macb: unify at91 and avr32 platform data
Jamie Iles
- [PATCH 2/2] macb: remove conditional clk handling
Jamie Iles
- [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver
Mark Brown
- [Qualcomm PM8921 MFD v2 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem
Mark Brown
- [PATCH v3 0/7] ARM timer clock api support
Rob Herring
- [PATCH 1/4] msm: iommu: Clock control for the IOMMU driver
David Brown
- [PATCH] OMAP2+: clockdomain: add flag that will block autodeps from being added for a clockdomain
Paul Walmsley
- [PATCH FYI] msm: Dummy 8960 clock driver
David Brown
- [PATCH 0/5] Fix build failures with binutils 2.21
Ben Hutchings
- [PATCH] ARM: EXYNOS4: CPUIDLE Support
Jaecheol Lee
- [PATCH 0/3] ARM: EXYNOS4: Support suspend to ram
Jaecheol Lee
- [PATCH v4 0/3] ARM: S5P: Add HRT support for s5p series
Sangbeom Kim
- [PATCH] net/fec: check id_entry pointer before using it
Jason Liu
- [RFC PATCH V2] ARM: Use generic BUG() handler
Simon Glass
- [PATCH v2] OMAP4: PM: Set static dependency between MPUSS and EMIF
Santosh Shilimkar
- [PATCH] omap2+: mux: Remove the use of IDLE flag.
sricharan
- [PATCH] omap2+: mux: Remove the use of IDLE flag.
Sricharan R
- [PATCH 0/3] TP6105x core and regulator driver v2
Linus Walleij
- [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator v2
Linus Walleij
- [GIT PULL] OMAP: L3 error handling driver for for 2.6.39
Santosh Shilimkar
- [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The patch also adds support for the second LED that is green when off and red when on. Signed-off-by: Robin Becker <robin at reportlab.com>
Robin Becker
- IRQ handler under load - slow response
Arno Steffen
- [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The pat
saeed bishara
- [PATCH v2 0/3] Harmony PCI-e and regulators
Mike Rapoport
- [PATCH v2 1/3] ARM: tegra: harmony: update PCI-e initialization sequence
Mike Rapoport
- [PATCH v2 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC
Mike Rapoport
- [PATCH v2 3/3] ARM: tegra: update defconfig
Mike Rapoport
- [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test
Andy Green
- [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables
Catalin Marinas
- [RFC PATCHv1 0/2] Export SoC info through sysfs
Maxime Coquelin
- [PATCH 0/4] SCM fixes and updates
Stephen Boyd
- [PATCH] ARM: hw_breakpoint: Fix newlines in WARNings
Stephen Boyd
- [PATCH 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support
Steve Sakoman
- [PATCH RFC] arm: mini2440: Fix uda134x codec problem.
Marek Belisko
- [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage
John Bonesio
- [PATCH] omap2plus: smartreflex: remove sr debug directory in omap_sr_remove()
Kevin Hilman
- [PATCH v2 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support
Steve Sakoman
- [PATCH] OMAP2+: hwmod: allow board files to prevent devices from being reset upon init
Paul Walmsley
- [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1
Paul Walmsley
- [PATCH] OMAP3: hwmod: remove incorrect SmartReflex -> L4 CORE interconnect links
Paul Walmsley
- [PATCH] ARM: fix compiling error due to debug_info change
Bryan Wu
- [PATCH 1/2] ARM: fix compiling error due to debug_info change
Bryan Wu
- [PATCH] ARM: fix compiling error due to debug_info change
Bryan Wu
- [PATCH 0/3] Peripheral image loader (PIL)
Stephen Boyd
- [PATCH V2 0/3] ARM: EXYNOS4: Suspend to RAM Support
Kukjin Kim
- [PATCH V3 2/3] OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
Shweta Gulati
- [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards.
Richard Zhu
- [PATCH] OMAP4: Intialize IVA Device in addition to DSP device.
Shweta Gulati
- [PATCH v2 0/5] OMAP3: PM: Fixes for low power code
Santosh Shilimkar
- [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM
Paul Walmsley
- [RFC 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
Richard Zhu
- [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
Richard Zhu
- Recall: [RFC 2/2] MX53 Enable the AHCI SATA on MX53 LOCO
Zhu Richard-R65037
- Recall: [RFC 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
Zhu Richard-R65037
- Single-stepping ARMv7 with KDB...
Andrei Warkentin
- [PATCH 0/8] macb: add support for Cadence GEM
Jamie Iles
- [PATCH 1/3] OMAP2+: PM: omap device: API's for handling mstandby mode
Paul Walmsley
- [PATCHv2] omap2/3: dmtimer: Enable autoidle
Paul Walmsley
- [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump
Bryan Wu
- [PATCH 1/2] at91: provide pclk and hclk for macb ethernet devices
Jamie Iles
- [PATCH v3 0/3] ARM: S5P: Add platform helpers for MIPI-CSIS/DSIM DPHY
Sylwester Nawrocki
- [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump
Will Deacon
- i.MX Pull request for -next
Sascha Hauer
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Santosh Shilimkar
- [PATCH v2 01/19] OMAP4: PM: Add omap WakeupGen module support
Santosh Shilimkar
- [PATCH v2 02/19] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit
Santosh Shilimkar
- [PATCH v2 04/19] OMAP4: PM: Add SAR RAM support
Santosh Shilimkar
- [PATCH v2 05/19] OMAP4: PM: Add CPUX OFF mode support
Santosh Shilimkar
- [PATCH v2 06/19] OMAP4: PM: Initialise all the clockdomains to supported states
Santosh Shilimkar
- [PATCH v2 07/19] OMAP4: PM: Program CPU1 to hit OFF when off-lined
Santosh Shilimkar
- [PATCH v2 09/19] OMAP4: PM: Add GIC distributor and interface enable/disable accessory API
Santosh Shilimkar
- [PATCH v2 10/19] OMAP4: PM: Add GIC save/restore support
Santosh Shilimkar
- [PATCH v2 11/19] OMAP4: PM: Add WakeupGen save/restore support
Santosh Shilimkar
- [PATCH v2 12/19] OMAP4: PM: Add L2 cache lowpower support
Santosh Shilimkar
- [PATCH v2 14/19] OMAP4: pm-debug: Add wakeup timer and debug counters
Santosh Shilimkar
- [PATCH v2 15/19] OMAP4: cpuidle: Basic CPUidle support
Santosh Shilimkar
- [PATCH v2 16/19] OMAP4: cpuidle: Add MPUSS RET OFF states
Santosh Shilimkar
- [PATCH v2 17/19] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states.
Santosh Shilimkar
- [PATCH v2 18/19] OMAP4: cpuidle: Add CPU hotplug notifier and prepare() hook.
Santosh Shilimkar
- [PATCH v2 19/19] OMAP4: Remove un-used do_wfi() macro.
Santosh Shilimkar
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Kevin Hilman
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Kevin Hilman
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Santosh Shilimkar
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Santosh Shilimkar
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Kevin Hilman
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Santosh Shilimkar
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Kevin Hilman
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Santosh Shilimkar
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Kevin Hilman
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Santosh Shilimkar
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Kevin Hilman
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Santosh Shilimkar
- [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.
Santosh Shilimkar
- [PATCH v2 03/19] OMAP4: PM: Export omap4_get_base*() rather than global address pointers
Santosh Shilimkar
- [PATCH v2 08/19] OMAP4: PM: CPU1 wakeup workaround from Low power modes
Santosh Shilimkar
- [PATCH v2 13/19] OMAP4: suspend: Add MPUSS RET and OFF support
Santosh Shilimkar
- [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init
Mark Brown
- error: #error Unknown data abort handler type from glue.h file
Madhavi Manchala
- Newbies question: Which tree do I base my mc13783-regulator patches on?
Helmut Raiger
- [PATCH] can : AM3517EVM : add platform specific init
Abhilash K V
- EXPLORE: Lifesciences in India!
Tushara S. Nair
- [PATCH v2 0/7] OMAP: add PM CONSTRAINTS framework
Jean Pihet
- at91samx5: support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] arm/dt: Add dtb make rule
Rob Herring
- [PATCH] ARM: mx27: fix gpt4/5 base address
Wolfram Sang
- [GIT PULL] OMAP: core/clock: patches for 2.6.39
Paul Walmsley
- [PATCH] kbuild: reenable section mismatch analysis
Andrew Morton
- [PATCH] OMAP2+: voltage: don't build voltage layer when !CONFIG_PM
Kevin Hilman
- [GIT PULL] OMAP PM updates for 2.6.39
Kevin Hilman
- [PATCH V4 2/5] omap4: board-4430sdp: Initialise the serial pads.
sricharan
- [PATCH V3] OMAP4: PM: Set static dependency between MPUSS-EMIF and MPUSS-L3_1
Santosh Shilimkar
- [PATCH] z2-battery: Fix count of properties
Vasily Khoruzhick
- [PATCH 1/8] ARM: PXA: Z2: Use only power button as wake source
Vasily Khoruzhick
- [PATCH] OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0
Santosh Shilimkar
- [RFC PATCHv2 0/2] Export SoC info through sysfs
Maxime Coquelin
- [RFC PATCHv2 1/2] Export SoC info through sysfs
Maxime Coquelin
- [RFC PATCHv2 2/2] ux500: Export U8500 SoC info through sysfs
Maxime Coquelin
- questions about arm trustzone
shiraz hashim
- [PATCH v2 REPOST] ARM: Thumb-2: Add local symbols to work around gas behaviour
Dave Martin
- [PATCH v2 REPOST] ARM: Thumb-2: Add local symbols to work around gas behaviour
Dave Martin
- [PATCH RESEND] S3C2440: AT2440EVB: Add touchscreen support
Ramax Lo
- memmap_valid_within problem with sparsely populated sections
Will Deacon
- [PATCH] arm: realview: Fix secondary GIC initialisation for EB with MPCore tile
Pawel Moll
- [RFC] kprobes with thumb2 conditional code
Tixy
- [RFC] ARM: Cortex-A9: Enable dynamic clock gating
Catalin Marinas
- [PATCH] macb: detect IP version to determin if we are on at91 or avr32
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] arm: mmci: Add ARM variant with extended FIFO
Pawel Moll
- [GIT PULL] another set of OMAP PM updates for 2.6.39
Kevin Hilman
- [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39
Linus Walleij
- [PATCH] ARM: tegra: harmony: Register and configure WM8903 IRQ GPIO
Stephen Warren
- [PATCH 0/2] omap2+: Few mux patches
Tony Lindgren
- compiling 2.6.37 kernel in THUMB2 mode
vb at vsbe.com
- [PATCH 00/10] ux500: support for snowball board.
mathieu.poirier at linaro.org
- [PATCH 0/5] S5PC210/S5PV310/EXYNOS4 interrupts update
Kukjin Kim
- [PATCH] arm: Fix .size directive for xscale_dma_a0_map_area
Ben Hutchings
- [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver
Grant Likely
- [PATCH V2] OMAP4: Intialize IVA Device in addition to DSP device.
Shweta Gulati
- [PATCH] arm: mach-kirkwood: add led in sheevaplug-setup.c
Robin Becker
- [PATCH 09/10] MCDE: Add build files and bus
Rob Clark
- [PATCH 00/20] world-writable files in sysfs and debugfs
Vasiliy Kulikov
- [RFC PATCH 0/5] OMAP2+ / Panda implementation for async platform_data
Andy Green
- [PATCH] OMAP4: PM: remove redundant #ifdef CONFIG_PM
Nishanth Menon
- [PATCH 1/2] i2c-pxa2xx: Fix register offsets
Vasily Khoruzhick
- [PATCH v2 0/6] ARM: PXA: Z2: Zipit Z2 improvements series
Vasily Khoruzhick
- [PULL] PXA marex/devel-fix
Marek Vasut
- [PATCH] DM644x EVM: register MUSB device earlier
Sergei Shtylyov
- [PATCH] pxa2xx_spi: Fix race condition in stop_queue()
Vasily Khoruzhick
- [PATCH V12 3/4] ptp: Added a clock driver for the IXP46x.
Krzysztof Halasa
- [PATCH 0/4] [rfc v3] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM
Simon Horman
- [PATCH] mtd/mxc_nand: add support for multiple chips on V21 devices
Baruch Siach
- [PATCH v2 0/4] S5PC210/S5PV310/EXYNOS4 interrupts update
Marek Szyprowski
- [PATCH v2] ARM: EXYNOS4: add a placeholder for board specific interrupts
Marek Szyprowski
- [PATCH] ARM: imx/mx25: add NAND chip select pins to iomux
Baruch Siach
- [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
Richard Zhu
- [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO
Richard Zhu
- [PATCH] arm: cmpxchg syscall should data abort if page not write or not young
Po-Yu Chuang
- [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path
Aaro Koskinen
- [PATCH v2 0/1] ARM: QQ2440 machine architecture
Domenico Andreoli
- [PATCH v2 1/1] Add core support for QQ2440.
Domenico Andreoli
- [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type
Sanjeev Premi
- [PATCH v2 0/2] CS89x0: add QQ2440 networking support
Domenico Andreoli
- [PATCH v2 1/2] CS89x0: Finish transition to CS89x0_NONISA_IRQ
Domenico Andreoli
- [PATCH v2 2/2] CS89x0: Add networking support for QQ2440
Domenico Andreoli
- [PATCH 1/7] davinci: move DM64XX_VDD3P3V_PWDN to devices.c
Manjunath Hadli
- [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod
Manjunath Hadli
- [PATCH 3/7] davinci: dm644x: Replace register base value with a defined macro
Manjunath Hadli
- [PATCH 4/7] davinci: dm644x: change vpfe capture structure variables for consistency
Manjunath Hadli
- [PATCH 5/7] davinci: dm644x: move vpfe init from soc to board specific files
Manjunath Hadli
- [PATCH 6/7] davinci: dm644x: add support for v4l2 video display
Manjunath Hadli
- [PATCH 7/7] davinci: dm644x EVM: add support for VPBE display
Manjunath Hadli
- [PATCH] omap: zoom: host should not pull up wl1271's irq line
Ohad Ben-Cohen
- [PATCH] ARM: mx5: fix clk id for a few DEFINE_CLOCK
Shawn Guo
- [PATCH] mmc: change CONFIG of MMC_SDHCI based drivers from 'bool' to 'tristate'
Shawn Guo
- [RFC][PATCH v2 00/23] __vmalloc: Propagating GFP allocation flag inside __vmalloc().
Prasad Joshi
- [RFC][PATCH v2 02/23] (armho) __vmalloc: add gfp flags variant of pte and pmd allocation
Prasad Joshi
- [GIT PULL] davinci platform updates for 2.6.39
Kevin Hilman
- [PATCH 1/2] ARM: mx5/babbage: Remove unneeded gpio_set_value call
Fabio Estevam
- [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call
Fabio Estevam
- [RFC][PATCH v2 23/23] __vmalloc: add gfp flags variant of pte, pmd, and pud allocation
Prasad Joshi
- [PATCH][Trivial] ARM: Remove duplicate linux/sched.h include from arch/arm/plat-iop/time.c
Jesper Juhl
- [PATCH] ARM: Remove bouncing author email from arch/arm/plat-iop/time.c
Jesper Juhl
- [PATCH 1/1] ARM: mx53_loco: Add GPIO Keypad support
Frank Li
- [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards.
Richard Zhu
- [PATCH 00/11] Support for msm8660 and msm8960 dma
Jeff Ohlstein
- [PATCH 01/11] msm: dma: Guard for multiple file inclusion
Jeff Ohlstein
- [PATCH] ARM: EXYNOS4 NURI: Add MAX8997 support (MFD+Regulator+RTC)
MyungJoo Ham
- [PATCH 1/1 v2] ARM: mx53_loco: Add GPIO Keypad support
Frank Li
- [PATCH 1/1 v3] ARM: mx53_loco: Add GPIO Keypad support
Frank Li
- [PATCHv2 0/9] macb: add support for Cadence GEM
Jamie Iles
- [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name
Jamie Iles
- [PATCHv2 2/9] macb: remove conditional clk handling
Jamie Iles
- [PATCHv2 3/9] macb: unify at91 and avr32 platform data
Jamie Iles
- [PATCHv2 4/9] macb: convert printk to netdev_ and friends
Jamie Iles
- [PATCHv2 5/9] macb: initial support for Cadence GEM
Jamie Iles
- [PATCHv2 6/9] macb: support higher rate GEM MDIO clock divisors
Jamie Iles
- [PATCHv2 7/9] macb: support statistics for GEM devices
Jamie Iles
- [PATCHv2 8/9] macb: support DMA bus widths > 32 bits
Jamie Iles
- [PATCHv2 9/9] macb: allow GEM to have configurable receive buffer size
Jamie Iles
- [PATCH v17 00/13] davinci vpbe: dm6446 v4l2 driver
Manjunath Hadli
- [PATCH v15 01/13] davinci vpbe: V4L2 display driver for DM644X SoC
Manjunath Hadli
- [PATCH v15 02/13] davinci vpbe: VPBE display driver
Manjunath Hadli
- [PATCH v15 03/13] davinci vpbe: OSD(On Screen Display) block
Manjunath Hadli
- [GIT PULL] Samsung S5P for 2.6.39 merge window
Kukjin Kim
- [PATCH v15 04/13] davinci vpbe: VENC( Video Encoder) implementation
Manjunath Hadli
- [PATCH v15 05/13] davinci vpbe: Build infrastructure for VPBE driver
Manjunath Hadli
- [PATCH v15 06/13] davinci vpbe: Readme text for Dm6446 vpbe
Manjunath Hadli
- [PATCH v17 07/13] davinci: move DM64XX_VDD3P3V_PWDN to devices.c
Manjunath Hadli
- [PATCH v17 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod
Manjunath Hadli
- [PATCH v17 09/13] davinci: dm644x: Replace register base value with a defined macro
Manjunath Hadli
- [PATCH v17 10/13] davinci: dm644x: change vpfe capture structure variables for consistency
Manjunath Hadli
- [PATCH v17 11/13] davinci: dm644x: move vpfe init from soc to board specific files
Manjunath Hadli
- [PATCH v17 12/13] davinci: dm644x: add support for v4l2 video display
Manjunath Hadli
- [PATCH v17 13/13] davinci: dm644x EVM: add support for VPBE display
Manjunath Hadli
- When does mach-types get updated in a tree?
John Linn
- [PATCH 0/4] Fix ST-Ericsson Ux500 specific PL022 & PL180 amba devices
Philippe Langlais
- [PATCH 1/4] amba: add name based matching
Philippe Langlais
- [PATCH 2/4] amba-pl022: Add loopback support for the SPI on 5500
Philippe Langlais
- [PATCH 3/4] mmci/pl180: Support for db8500v2. ST-Ericsson modified ARM PrimeCell PL180 block has not got an updated corresponding amba-id, althought the IP block has changed in db8500v2. The change was done to the datactrl register.
Philippe Langlais
- [RFC PATCHv2 00/20] A15 architected timer support
Marc Zyngier
- [RFC PATCHv2 02/20] ARM: omap2: remove stubbed twd_timer_setup call
Marc Zyngier
- [GIT PULL] final davinci updates for 2.6.39
Kevin Hilman
- One quick question about SMP on ARM
Catalin Marinas
- [PATCH] ARMv7: Flush the vectors page using the base address
Catalin Marinas
- [PATCH 2/2] i.MX25: add sdma clock definitions
Michael Trimarchi
- pxa27x/spitz: serials in recent kernels
Pavel Machek
- [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver
Andy Green
- [PATCH v3] ARM: add QQ2440 machine architecture
Domenico Andreoli
- [PATCH 02/13] plat-spear: use list_move() instead of list_del()/list_add() combination
Kirill A. Shutemov
- ARM Tegra updates for 2.6.39
Colin Cross
- [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28
Huang Shijie
- [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28
Huang Shijie
- [PATCH] ARM: EXYNOS4: Add Atmel mXT touchscreen device to the NURI board
Joonyoung Shim
- [PATCHv2] omap3: alsa-soc: Remove restrictive checks for cpu type
Premi, Sanjeev
- [PATCHv2] omap3: alsa-soc: Remove restrictive checks for cpu type
Sanjeev Premi
- [PATCH v4 3/6] ARM: mxs: dynamically allocate mmc device
Uwe Kleine-König
- [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support
Richard Cochran
- [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation
Will Deacon
- PATCH [1/1] Clock support for VT8500/WM8505
Arnd Bergmann
- [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value
Aaro Koskinen
- [PATCHv3 1/3] ARM: mx51: Add entry for gpc_dvfs_clk
Dinh.Nguyen at freescale.com
- [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI
Dinh.Nguyen at freescale.com
- [PATCH] ARM: Use generic BUG() handler
Simon Glass
- [PATCH] ARM: mxs: fix naming of struct holding info for mxs-i2c devices
Uwe Kleine-König
- [PATCH 1/4] ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset
Fabio Estevam
- [PATCH 1/7] ARM: add GPMI support for imx23/imx28
Huang Shijie
- [PM8921 MFD V3 0/6] pmic8921 core and subdevices
adharmap at codeaurora.org
- [PATCH 2/3] ep93xx: add /proc/cpuinfo extension
Martin Guy
- [PATCH V6 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS
Richard Zhu
- [PATCH V6 2/4] mmc: add the abort CMDTYE bits definition
Richard Zhu
- reboot/kexec in 2.6.38
Pavel Machek
- [PATCH V1 1/3] ahci_platform: add two clk pointer member into ahci_platform_data struct
Richard Zhu
- [PATCH V1 2/3] AHCI Add the AHCI SATA feature on MX53 platforms
Richard Zhu
- [PATCH V1 3/3] MX53 Enable the AHCI SATA on MX53 LOCO
Richard Zhu
- [PATCH 1/2] s5pc110: add clock gate for MIPI-DSI controller.
Kukjin Kim
- [PATCH 2/2] s5pc110: add MIPI-DSI controller driver.
Kukjin Kim
- [PATCH V2 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
Richard Zhu
- [PM8921 MFD V3 2/6] mfd: pm8xxx: Add irq support
Thomas Gleixner
- Why don't we have atomic_set_mask()?
KyongHo Cho
- [PATCH 1/2] ARM: mxc: Add dummy_get_cycles to avoid access before init is done
Jan Weitzel
- [PATCH 2/2] ARM: mxc: Add sched_clock to mxc platform
Jan Weitzel
- [PATCH] omap3: beaglexm: fix user button.
Javier Martin
- [PATCH v4 0/7] Switch ARM platforms from integrator-flash to physmap
Marc Zyngier
- [PATCH 0/9] Support for NXP LPC2K SoCs
Ithamar R. Adema
- [PATCH v2 1/4] ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset
Fabio Estevam
- [PATCH v2 2/4] ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset
Fabio Estevam
- [PATCH v2 3/4] ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset
Fabio Estevam
- [Git pull] MSM for v2.6.39
David Brown
- [PATCH 0/3] ARM: OMAP2+: gpmc warning fixes
Balaji T K
- [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver
Grant Likely
- [PATCH] ARM: S3C24XX: H1940: RX1950: Change default LED triggers
Vasily Khoruzhick
- [GIT PULL] omap changes for v2.6.39 merge window
Tony Lindgren
- [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.
Grant Likely
- [PATCH] msm: iommu: Use relaxed register access functions
Stepan Moskovchenko
- [PATCH 1/2] msm: Add gpio support for 8960
Rohit Vaswani
- [PATCH] msm: Add gpio support for 8960
Rohit Vaswani
- [PATCH v4] ARM: mx51: Print silicon revision on boot
Fabio Estevam
- [PATCH] ARM: Merge v6 and v7 DEBUG_LL DCC support
Stephen Boyd
- [PM8921 MFD V4 6/6] msm: board-8960: Add support for pm8921
adharmap at codeaurora.org
- [PATCH] hwspinlock: depend on OMAP4
Ohad Ben-Cohen
- [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region
Wim Van Sebroeck
- [PATCH] MX51: Add AUDMUX ports definitions
julien.boibessot at free.fr
- [PATCH V7 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS
Richard Zhu
- compiling 2.6.37 kernel in THUMB2 mode
Vincent Palatin
- [PATCH] ARM: imx: let MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_SSI
Uwe Kleine-König
- [PATCH v3 7/7] tty: add pruss SUART driver
Alan Cox
- [PATCH] sound/soc/pxa/zylonite.c: set .codec_dai_name in initializer
Antonio Ospite
- [PATCH v3 7/7] tty: add pruss SUART driver
Arnd Bergmann
- [PATCH 1/4] ARM i.MX: remove duplicated #include
Huang Weiyi
- [PATCH 2/4] ARM: S5P: remove duplicated #include
Huang Weiyi
- [PATCH v2 0/9] Support for NXP LPC2K SoCs
Ithamar R. Adema
- [PATCHv4 1/3] ARM: mx51: Add entry for gpc_dvfs_clk
Dinh.Nguyen at freescale.com
- [PATCHv4 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI
Dinh.Nguyen at freescale.com
- [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51
Dinh.Nguyen at freescale.com
- [RFC][PATCH v3 21/22] mm, arm: add gfp flags variant of pmd and pte allocations
Prasad Joshi
- [PATCH] msm: uncompress.h: Fix putc unused warning
Stephen Boyd
- [PATCH 00/20] video: msm: Adding Support for MDP3.1
Carl Vanderlip
- [PATCH] ARM: kernel/sleep.S: fix Thumb2 compilation issues
Nicolas Pitre
- [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support
Richard Cochran
- Support for ARM940T core Samsung S3C2510A MCU under Linux
Arnd Bergmann
- [PATCH] ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes
Shawn Guo
- [Q] Booting kernel from NFS?
Chen Wenjie
- Updated mach-types update
Russell King - ARM Linux
- [GIT PULL] pxa: patches for 2.6.39
Eric Miao
- [PATCH v3 0/9] Support for NXP LPC2K SoCs
Ithamar R. Adema
- [PATCH v3 9/9] lpc2k: defconfig for NXP LPC2K platform
Ithamar R. Adema
- [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call
Wolfram Sang
- [PATCH V7 0/4] mmc: one comment is missing addressed in the previous review.
Richard Zhu
- [PATCH V7 0/4] mmc: one comment is missing addressed.
Richard Zhu
- [PATCH V7 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS
Richard Zhu
- [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs
Richard Zhu
- [PATCH V7 4/4] mmc: sdhci-esdhc: enable esdhc on imx53
Richard Zhu
- Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"
Barry Song
- Booting Integrator/AP with ARM920T
Linus Walleij
- Build warning in todays linus/master
Jamie Iles
- [PATCH v4 08/19] ARM: LPAE: Introduce the 3-level page table format definitions
Catalin Marinas
- i.MX31 suspend and VSTBY question
Helmut Raiger
- Enable UART3 on TX28
Lothar Waßmann
- [PATCH] ARM: mxs Enable UART3 on TX28
Lothar Waßmann
- [PATCH 1/2] ARM: mxs: configure and register the second FEC device on TX28/STK5-V4
Lothar Waßmann
- [PATCHv2 4/4] msm: scm: Get cacheline size from CTR
Stephen Boyd
- dma cache coherency issue
Dongas
- [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend
Jean Pihet
- [PATCHv5 1/4] ARM: mx50: Add support to get the silicon revision
Dinh.Nguyen at freescale.com
- [PATCHv5 2/4] ARM: mx51: Add entry for gpc_dvfs_clk
Dinh.Nguyen at freescale.com
- [PATCHv5 4/4] ARM: mx51: Add support for low power suspend on MX51
Dinh.Nguyen at freescale.com
- [PATCH v2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage
John Bonesio
- [PATCH] ARM: Use asm-generic/sizes.h
Stephen Boyd
- [PATCH v2 09/13] can: pruss CAN driver.
Subhasish Ghosh
- Single-stepping ARMv7 with KDB...
Andrei Warkentin
- [PATCH] msm: board-msm8960: Add USB peripheral and OTG support
Anji jonnala
- [PATCH] ARM: pxafb: Fix access to nonexistent member of pxafb_info
Marek Vasut
- Support for ARM940T core Samsung S3C2510A MCU under Linux
Arnd Bergmann
- [PATCH] Input: tca6416-keypad: Change to module_init()
Magnus Damm
- [PATCH] arm: handle ptrace requests to change PC during interrupted system calls
Arnd Bergmann
- Updated mach-types update
Russell King - ARM Linux
- [PATCH] ARM: memmap: only free allocated memmap entries when using SPARSEMEM
Will Deacon
- [PATCH] ARM: S5PV210: Fix security engine interrupt names
Vladimir Zapolskiy
- Single-stepping ARMv7 with KDB...
Andrei Warkentin
- [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.
Viresh Kumar
- [PATCH 0/6] use AMBA periphid for hardcoding
Linus Walleij
- [PATCH 1/6] mach-netx: delete hardcoded periphid
Linus Walleij
- [PATCH 2/6] mach-ux500: delete SSP PrimeCell ID
Linus Walleij
- [PATCH 3/6] amba: make hardcoded periphid override hardware
Linus Walleij
- [PATCH 4/6] mach-ux500: force PrimeCell revisions
Linus Walleij
- [PATCH 5/6] spi/pl022: Add loopback support for the SPI on 5500
Linus Walleij
- [PATCH 6/6] mmci: support for ST-Ericsson db8500v2
Linus Walleij
- [PATCH 1/4] davinci: psc.h: clean up indentation done using spaces
Sekhar Nori
- [PATCH 2/4] davinci: enable forced transitions on PSC
Sekhar Nori
- [PATCH 4/4] davinci: da850 evm: register SATA device
Sekhar Nori
- [PATCH 1/2] davinci: mityomapl138: Use correct id for NAND controller
Michael Williamson
- multiple definition of show_mem for pxa
Jonathan Cameron
- [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation
Jean Pihet
- [PATCH v2] ARM: perf: reset counters on all CPUs during initialisation
Will Deacon
- [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency
Will Deacon
- [PATCH][KERNEL] Add support for CPLD regs and CF cards in kernel 2.6.38
Marek Vasut
- [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency
Ashwin Chaugule
- [PATCH 0/2] Fix resource size miscalculations
Joe Perches
- [trivial PATCH 1/2] treewide: Fix iomap resource size miscalculations
Joe Perches
- [trivial PATCH 2/2] arm: mach-u300/gpio: Fix mem_region resource size miscalculations
Joe Perches
Last message date:
Wed Mar 23 15:55:37 EDT 2011
Archived on: Wed Mar 23 15:56:08 EDT 2011
This archive was generated by
Pipermail 0.09 (Mailman edition).