[PATCH 2/6] AT91: PMC header: add 5series support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Thu Mar 10 13:08:53 EST 2011
From: Nicolas Ferre <nicolas.ferre at atmel.com>
Add 5series chips family support in PMC header file:
Alternate prescaler location and CSS lenght for PCKR is added.
The new Peripheral Control Register management is added.
Protection mode register is modified to complete its management.
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/mach-at91/include/mach/at91_pmc.h | 63 ++++++++++++++++++++++------
1 files changed, 50 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index e46f93e..1782178 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -47,9 +47,13 @@
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
-#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
-#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
+#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */
+#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */
+#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */
+#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */
#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
@@ -74,14 +78,24 @@
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */
-#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
-#define AT91_PMC_PRES_1 (0 << 2)
-#define AT91_PMC_PRES_2 (1 << 2)
-#define AT91_PMC_PRES_4 (2 << 2)
-#define AT91_PMC_PRES_8 (3 << 2)
-#define AT91_PMC_PRES_16 (4 << 2)
-#define AT91_PMC_PRES_32 (5 << 2)
-#define AT91_PMC_PRES_64 (6 << 2)
+#define PMC_PRES_OFFSET 2
+#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */
+#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET)
+#define PMC_ALT_PRES_OFFSET 4
+#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */
+#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET)
#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
#define AT91RM9200_PMC_MDIV_2 (1 << 8)
@@ -105,7 +119,14 @@
#define AT91_PMC_USBS_UPLL (1 << 0)
#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
+#define AT91_PMC_SMD (AT91_PMC + 0x3c) /* Soft Modem Clock Register [some SAM9 only] */
+#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */
+#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */
+#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV)
+
#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
+#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */
+#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */
#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */
#define AT91_PMC_CSSMCK_CSS (0 << 8)
#define AT91_PMC_CSSMCK_MCK (1 << 8)
@@ -123,11 +144,27 @@
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */
+#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */
+#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */
#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
-#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
+#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Write Protect Mode Register [some SAM9, AT91CAP9 revC only] */
+#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */
+#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */
+#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */
+
+#define AT91_PMC_WPSR (AT91_PMC + 0xe8) /* Write Protect Status Register [some SAM9] */
+#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */
+#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */
#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
+#define AT91_PMC_PCR (AT91_PMC + 0x10c) /* Peripheral Control Register [some SAM9] */
+#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */
+#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */
+#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */
+#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV)
+#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
+
#endif
--
1.7.4.1
More information about the linux-arm-kernel
mailing list