March 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Mar 1 00:58:49 EST 2011
Ending: Thu Mar 31 08:41:16 EDT 2011
Messages: 2726

• [PATCH 2/5] ARM: gic: Add distributor and interface enable/disable accessory api   Santosh Shilimkar
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c   Tomi Valkeinen
• [PATCH 1/2] ARM imx53: add pwm devices support   Jason Chen
• [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device   Jason Chen
• [PATCH 1/1] GPIO support for WM8505   Tony Prisk
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCH 2/4] ARM:boot:device tree: Merge specific atags into the device tree   Nicolas Pitre
• [PATCH 4/4] ARM:boot:device tree: Allow multiple device trees to be appended to zImage   Nicolas Pitre
• [PATCH v2 5/9] OMAP2+: hwmod: rename some init functions   DebBarma, Tarun Kanti
• [PATCH v2 02/13] da850: pruss platform specific additions.   Subhasish Ghosh
• [PATCH v2 2/4] msm: iommu: Rework clock logic and add IOMMU bus clock control   Trilok Soni
• [PATCH 1/2] ARM imx53: add pwm devices support   Eric Miao
• [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs   Alexander Stein
• [PATCH 1/4] ASoC: Add TI tlv320aic32x4 codec support.   javier Martin
• [RFC] device.h: add device_set_platdata routine   Uwe Kleine-König
• [PATCH 1/2] ARM imx53: add pwm devices support   Uwe Kleine-König
• [PATCH 1/2] ARM imx53: add pwm devices support   Eric Miao
• [RFC] device.h: add device_set_platdata routine   viresh kumar
• [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs   Wolfram Sang
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [PATCH 1/2] ARM imx53: add pwm devices support   Uwe Kleine-König
• [RFC] device.h: add device_set_platdata routine   Uwe Kleine-König
• [PATCH 1/2] ARM imx53: add pwm devices support   Jason Chen
• [RFC PATCH] ARM: Use generic BUG() handler   Mikael Pettersson
• [RFC] device.h: add device_set_platdata routine   viresh kumar
• [PATCH 3/8] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 1/3] ARM: S5P: Add s5p_timer support for HRT   Sylwester Nawrocki
• [PATCH] arm: mxs: add irq_chip-name for GPIO IRQs   Wolfram Sang
• [PATCH v2] plat-mxc: Provide irq_chip name for GPIO IRQs   Alexander Stein
• [PATCH 1/2] ARM imx53: add pwm devices support   Jason Chen
• [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device   Jason Chen
• [PATCH 3/8] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH v6 1/1] PRUSS UIO driver support   Thomas Gleixner
• Linux support for Samsung S3C2510A Processor   Madhavi Manchala
• [PATCH v6 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH V4 1/4] ARM: imx53_loco: add esdhc device support   Richard Zhu
• [PATCH V4 2/4] ARM: imx51/53: add sdhc3/4 clock   Richard Zhu
• [PATCH V4 3/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V4 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH 3/8] Add a mfd IPUv3 driver   Thomas Gleixner
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display   Cousson, Benoit
• [PATCH 3/8] Add a mfd IPUv3 driver   Arnd Bergmann
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   Will Deacon
• [PATCH 2/4] msm: scm: Fix improper register assignment   Will Deacon
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH V5 00/63] Updating SPEAr Support   viresh kumar
• [PATCH 3/8] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes   Viresh Kumar
• [PATCH V6 1/8] ST SPEAr: Reordering #includes in .h & .c files.   Viresh Kumar
• [PATCH V6 2/8] ST SPEAr: Include mach/hardware.h instead of mach/spear.h   Viresh Kumar
• [PATCH V6 3/8] ST SPEAr3xx: Rename sdio to sdhci   Viresh Kumar
• [PATCH V6 4/8] ST SPEAr Clock Framework: Rename usbd clock and align apb_clk entry   Viresh Kumar
• [PATCH V6 5/8] ST SPEAr3xx: Declare device structures after shirq code   Viresh Kumar
• [PATCH V6 6/8] ST SPEAr: Replacing SIZE macro's with SZ_4K macros   Viresh Kumar
• [PATCH V6 7/8] ST SPEAr: Remove unused *_SIZE macros from spear*.h files   Viresh Kumar
• [PATCH V6 8/8] ST SPEAr: Append UL to device address macros.   Viresh Kumar
• [PATCH V6 00/11] SPEAr3xx & SPEAr6xx: Single Image solution and padmux updates   Viresh Kumar
• [PATCH V6 01/11] ST SPEAr: Pad multiplexing handling modified   Viresh Kumar
• [PATCH V6 02/11] ST SPEAr clock: Define common clk_init routine in plat/clock.c   Viresh Kumar
• [PATCH V6 03/11] ST SPEAr Clock: Updating for single image solution   Viresh Kumar
• [PATCH V6 04/11] ST SPEAr3xx: Make local shirq structures static   Viresh Kumar
• [PATCH V6 05/11] ST SPEAR3xx: Rename register/irq defines to remove naming conflicts   Viresh Kumar
• [PATCH V6 06/11] ST SPEAr3xx: Rework pmx_dev code to remove conflicts   Viresh Kumar
• [PATCH V6 07/11] ST SPEAr3xx: Appending spear3** with global device structures   Viresh Kumar
• [PATCH V6 08/11] ST SPEAr3xx: Rework KConfig to allow all boards to be compiled in   Viresh Kumar
• [PATCH V6 09/11] ST SPEAr3xx: Replace defconfigs with single unified defconfig   Viresh Kumar
• [PATCH V6 00/10] Adding SPEAr13xx support   Viresh Kumar
• [PATCH V6 01/10] ST SPEAr13xx: Adding machine specific header files   Viresh Kumar
• [PATCH V6 02/10] ST SPEAr13xx: Adding machine specific src files   Viresh Kumar
• [PATCH V6 03/10] ST SPEAr13xx: Adding support in SPEAr generic plat/   Viresh Kumar
• [PATCH V6 04/10] ST SPEAr13xx: Added compilation support in arch/arm/   Viresh Kumar
• [PATCH V6 05/10] ST SPEAr13xx: Adding default config file   Viresh Kumar
• [PATCH V6 06/10] ST SPEAr13xx: Adding information in Documentation/ and MAINTAINERS   Viresh Kumar
• [PATCH V6 07/10] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms   Viresh Kumar
• [PATCH V6 08/10] ST SPEAr13xx: add L2 cache support   Viresh Kumar
• [PATCH V6 09/10] ST SPEAr13xx: Adding support for SPEAr1310   Viresh Kumar
• [PATCH V6 00/17] Adding devices support for all spear machines   Viresh Kumar
• [PATCH V6 01/17] ST SPEAr13xx: Added ARM PL061 GPIO Support   Viresh Kumar
• [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support.   Viresh Kumar
• [PATCH V6 03/17] ST SPEAr: Adding PLGPIO driver for spear platform   Viresh Kumar
• [PATCH V6 04/17] ST SPEAr3xx: Adding support for ST's PWM IP   Viresh Kumar
• [PATCH V6 05/17] ST SPEAr: Adding Watchdog support on spear3xx & spear6xx machines   Viresh Kumar
• [PATCH V6 06/17] ST SPEAr3xx: Adding RAS uart devices   Viresh Kumar
• [PATCH V6 07/17] ST SPEAr320: Adding support for CAN   Viresh Kumar
• [PATCH V6 08/17] ST SPEAr3xx: EMI (External Memory Interface) controller driver   Viresh Kumar
• [PATCH V6 09/17] ST SPEAr: Adding machine support for rtc-spear   Viresh Kumar
• [PATCH V6 0/3] Clock Framework & CPU Freq Updates   Viresh Kumar
• [PATCH V6 1/3] ST SPEAr Clock Framework: Adding support for DDR   Viresh Kumar
• [PATCH V6 2/3] ST SPEAr Clock Framework: Adding support for PLL frequency change   Viresh Kumar
• [PATCH V6 3/3] ST SPEAr CPU freq: Adding support for CPU Freq framework   Viresh Kumar
• [PATCH V6 10/11] ST SPEAr6xx: Rework Kconfig for single image solution   Viresh Kumar
• [PATCH V6 11/11] ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig   Viresh Kumar
• [PATCH V6 10/10] ST SPEAr13xx: Add padmux support   Viresh Kumar
• [PATCH V6 10/17] ST SPEAr: adding support for synopsis i2c designware   Viresh Kumar
• [PATCH V6 11/17] ST SPEAr: Adding machine support for USB host   Viresh Kumar
• [PATCH V6 12/17] ST SPEAr: Adding machine support for keyboard   Viresh Kumar
• [PATCH V6 13/17] ST SPEAr: Adding machine support for nand   Viresh Kumar
• [PATCH V6 14/17] ST SPEAr: Adding support for SSP PL022   Viresh Kumar
• [PATCH V6 15/17] ST SPEAr: Adding support for SDHCI (SDIO)   Viresh Kumar
• [PATCH V6 16/17] ST SPEAr Power Management: Added the support for Standby mode.   Viresh Kumar
• [PATCH V6 17/17] ST SPEAr: Updating defconfigs   Viresh Kumar
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Wolfram Sang
• [PATCH 3/8] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 3/8] Add a mfd IPUv3 driver   Arnd Bergmann
• [PATCH 3/6] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Sergei Shtylyov
• [PATCH 4/6] ARM: s5pv310: update IRQ combiner to use EOI in parent chip   Sergei Shtylyov
• [PATCH 0/3] arm: support pmu irq routed from CTI   tom.leiming at gmail.com
• [PATCH 1/3] arm: introduce cross trigger interface helpers   tom.leiming at gmail.com
• [PATCH 2/3] arm: pmu: support pmu irq routed from CTI   tom.leiming at gmail.com
• [PATCH 3/3] arm: omap4: support pmu   tom.leiming at gmail.com
• [PATCH 3/6] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [RFC] MMC: error handling improvements   Sahitya Tummala
• [PATCH 3/3] arm: omap4: support pmu   Santosh Shilimkar
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish Ghosh
• [PATCH] mach-ux500: activate fix for errata 753970   Linus Walleij
• [PATCH 1/2] ARM imx53: add pwm devices support   Fabio Estevam
• [PATCH 2/4] msm: scm: Fix improper register assignment   Will Deacon
• [PATCH 2/3] arm: pmu: support pmu irq routed from CTI   Will Deacon
• No subject   Javier Martin
• [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Javier Martin
• [PATCH v2 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi.   Javier Martin
• [PATCH v2 3/4] ASoC: Add machine driver for Visstrim_M10 board.   Javier Martin
• [PATCH v2 4/4] ARM: Add SSI and aic3204 code to Visstrim_M10 boards.   Javier Martin
• [PATCH v2 13/13] tty: pruss SUART driver   Alan Cox
• [PATCH 3/8] Add a mfd IPUv3 driver   Thomas Gleixner
• [PATCH 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Mark Brown
• [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Mark Brown
• [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support.   javier Martin
• [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Mark Brown
• [PATCH 2/4] ARM:boot:device tree: Merge specific atags into the device tree   Grant Likely
• [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support.   Arnd Bergmann
• [PATCH] mach-ux500: activate USB in the U8500 defconfig   Linus Walleij
• [PATCH 2/3] arm: pmu: support pmu irq routed from CTI   Ming Lei
• [RFC] device.h: add device_set_platdata routine   Greg KH
• [PATCH] audio:am3517evm support for AIC23   Abhilash K V
• [RFC PATCH] ARM: Use generic BUG() handler   Simon Glass
• [PATCH 0/3] OMAP2+ hwmod fixes   Cousson, Benoit
• [patch v1 0/3] arm: support pmu irq routed from CTI   tom.leiming at gmail.com
• [patch v1 1/3] arm: introduce cross trigger interface helpers   tom.leiming at gmail.com
• [patch v1 2/3] arm: pmu: support pmu irq routed from CTI   tom.leiming at gmail.com
• [patch v1 3/3] arm: omap4: support pmu   tom.leiming at gmail.com
• resend hsudc patches for s3c24xx?   Heiko Stübner
• [patch v1 3/3] arm: omap4: support pmu   Felipe Balbi
• [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used   Sergei Shtylyov
• [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used   Will Deacon
• [GIT PULL] omap fixes for v2.6.38-rc6   Aaro Koskinen
• [RFC PATCH] ARM: Use generic BUG() handler   Dave Martin
• [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used   Sergei Shtylyov
• [PATCH v6 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH] audio:am3517evm support for AIC23   Jarkko Nikula
• [PATCH] ARM: enable CONFIG_KTIME_SCALAR   Rob Herring
• Fwd: [RFC] MMC: error handling improvements   Murali Krishna Palnati
• MMC quirks relating to performance/lifetime.   Jens Axboe
• [PATCH 1/2] ARM imx53: add pwm devices support   Uwe Kleine-König
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Jens Axboe
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Sricharan R
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Fernando Guzman Lugo
• [PATCH] OMAP:iommu - pgd and pte entries weren't getting flushed out   Fernando Guzman Lugo
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Fabio Estevam
• [PATCH 2/5] ARM: mx31_3ds: Add I2C support   Fabio Estevam
• [PATCH 3/5] ARM: mx27_3ds: Add I2C support   Fabio Estevam
• [PATCH 4/5] ARM: mx25_3ds: Add I2C support   Fabio Estevam
• [PATCH 5/5] ARM: mx53_smd: Add I2C support   Fabio Estevam
• [RFC PATCH 5/5] RFC: msm: sps: Smart Peripheral System (SPS) driver.   David Brown
• [PATCH] S3C64XX: Fix keypad setup to configure correct number of rows   Mark Brown
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Uwe Kleine-König
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• Fwd: [RFC] MMC: error handling improvements   Russell King - ARM Linux
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [PATCH 0/2] 3 build failures in imx-for-2.6.39   Uwe Kleine-König
• [PATCH 1/2] ARM: mx3/cpuimx35: fix build failure   Uwe Kleine-König
• [PATCH 2/2] ARM: mx3/pcm043: fix build failure   Uwe Kleine-König
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [PATCH 1/2] ARM: iomux-imx31: mark pin_list as const   Uwe Kleine-König
• [PATCH 2/2] ARM: mxc91231/iomux: mark pin_list as const   Uwe Kleine-König
• [PATCH 1/2] ARM: mx3/cpuimx35: fix build failure   Russell King - ARM Linux
• [PATCH 1/2] ARM: mx3/cpuimx35: fix build failure   Uwe Kleine-König
• [patch 1/2] mc13892: reboot on wdi event   Liam Girdwood
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Kevin Hilman
• [PATCH v2 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi.   Liam Girdwood
• [PATCH] ARM: mx5: forbid building i.MX51 with any of i.MX50 or i.MX53   Uwe Kleine-König
• [PATCH v6 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH 2/2] ARM: mx3/pcm043: fix build failure   Fabio Estevam
• [PATCH v7 0/1] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v7 1/1] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH 2/4] msm: scm: Fix improper register assignment   Saravana Kannan
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• [PATCH v6 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH v7 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE   Kevin Hilman
• [patch v1 2/3] arm: pmu: support pmu irq routed from CTI   Will Deacon
• [PATCH v7 1/1] PRUSS UIO driver support   Hans J. Koch
• [GIT PULL] omap fixes for v2.6.38-rc6   Kevin Hilman
• [PATCH 0/2] OMAP3: cpuidle: prevent CORE pwrdm from entering low-power state when DSS active   Paul Walmsley
• [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on   Paul Walmsley
• [PATCH 2/2] OMAP3: cpuidle: add more details to the DSS-related CORE power domain state restriction   Paul Walmsley
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• [GIT PULL] OMAP PM fixes for 2.6.38-rc   Kevin Hilman
• [PATCH v2 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi.   Mark Brown
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• [PATCH 2/4] msm: scm: Fix improper register assignment   Nicolas Pitre
• [PATCH] OMAP2+: hwmod: use status bit info for reset line   Omar Ramirez Luna
• [PATCH 2/6] ARM: pxa2xx: reorganize I2C files   Ben Dooks
• [PATCH 3/6] i2c-pxa2xx: Add PCI support for PXA I2C controller   Ben Dooks
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Andrei Warkentin
• [PATCH] ARM: imx/mx25_3ds: Fix build failure   Fabio Estevam
• [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Donghwa Lee
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCH V4 1/4] ARM: imx53_loco: add esdhc device support   Fabio Estevam
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Saravana Kannan
• Store buffer and l2x0_cache_sync   Colin Cross
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• Common suspend and resume with L2 cache on   Colin Cross
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums   Dima Zavin
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums   Saravana Kannan
• [PATCH 2/6] ARM: pxa2xx: reorganize I2C files   Eric Miao
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCH v3 0/2] msm: add single-wire serial bus interface (SSBI) driver   Kenneth Heitke
• [PATCH v3 1/2] MAINTAINERS: Add drivers/platform/msm to MSM subsystem   Kenneth Heitke
• [PATCH v3 2/2] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   Kenneth Heitke
• [PATCH] msm: Add SSBI support for MSM8960   Kenneth Heitke
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Varadarajan, Charulatha
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Zhu Richard-R65037
• [PATCH] S3C64XX: Fix keypad setup to configure correct number of rows   Kukjin Kim
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Jason Liu
• [PATCH V2 2/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S3C6410   Banajit Goswami
• [PATCH V2 3/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6440   Banajit Goswami
• [PATCH V2 4/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6450   Banajit Goswami
• [PATCH V2 5/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PC100   Banajit Goswami
• [PATCH V2 6/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PV210   Banajit Goswami
• [PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT   Kukjin Kim
• [PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT   Kyungmin Park
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj
• [PATCH] MX1: Add structure, registration functions for framebuffer and rename LCDC INT   Gwenhael Goavec-Merou
• [PATCH] ARM: imx/mx25_3ds: Fix build failure   Uwe Kleine-König
• [PATCH 0/2] OMAP3: cpuidle: prevent CORE pwrdm from entering low-power state when DSS active   Tero.Kristo at nokia.com
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Sricharan R
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Maxime Coquelin
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Arnd Bergmann
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Sascha Hauer
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Russell King - ARM Linux
• [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device   Sascha Hauer
• [PATCH v7 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Maxime Coquelin
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Jason Liu
• [PATCH] arm: mxs: add irq_chip-name for GPIO IRQs   Shawn Guo
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH v7 1/1] PRUSS UIO driver support   Thomas Gleixner
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Shawn Guo
• [PATCH 1/2 v2] ARM: iomux-imx31: allow pin_list to be const   Uwe Kleine-König
• [PATCH 2/2 v2] ARM: mxc91231/iomux: allow pin_list to be const   Uwe Kleine-König
• [PATCH] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices   Mark Brown
• [PATCH V5 1/6] ARM: imx51/53: add sdhc3/4 clock   Richard Zhu
• [PATCH V5 2/6] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V5 3/6] mmc: add the abort CMDTYE bits definition   Richard Zhu
• [PATCH V5 4/6] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Richard Zhu
• [PATCH V5 5/6] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH V5 6/6] ARM: imx53_loco: add esdhc device support   Richard Zhu
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj
• [patch v1 2/3] arm: pmu: support pmu irq routed from CTI   Ming Lei
• Fwd: [RFC] MMC: error handling improvements   Linus Walleij
• Store buffer and l2x0_cache_sync   Catalin Marinas
• [PATCH v2] i2c-pxa2xx: Add PCI support for PXA I2C controller   Sebastian Andrzej Siewior
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Linus Walleij
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Govindraj
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Maxime Coquelin
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH v2 00/18] OMAP3+: PM: introduce SR class 1.5   Nishanth Menon
• [PATCH v2 01/18] omap3: hwmod: add smartreflex irqs   Nishanth Menon
• [PATCH v2 02/18] omap3+: voltage: remove initial voltage   Nishanth Menon
• [PATCH v2 03/18] omap3+: voltage: remove spurious pr_notice for debugfs   Nishanth Menon
• [PATCH v2 04/18] omap3+: voltage: use IS_ERR_OR_NULL   Nishanth Menon
• [PATCH v2 05/18] omap3+: voltage: use volt_data pointer instead values   Nishanth Menon
• [PATCH v2 06/18] omap3+: voltage: add transdone apis   Nishanth Menon
• [PATCH v2 07/18] omap3+: sr: make notify independent of class   Nishanth Menon
• [PATCH v2 08/18] omap3+: sr: introduce class init, deinit and priv data   Nishanth Menon
• [PATCH v2 09/18] omap3+: sr: fix cosmetic indentation   Nishanth Menon
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Nishanth Menon
• [PATCH v2 11/18] omap3+: sr: disable interrupt by default   Nishanth Menon
• [PATCH v2 12/18] omap3+: sr: enable/disable SR only on need   Nishanth Menon
• [PATCH v2 13/18] omap3+: sr: introduce notifiers flags   Nishanth Menon
• [PATCH v2 14/18] omap3+: sr: introduce notifier_control   Nishanth Menon
• [PATCH v2 15/18] omap3+: sr: disable spamming interrupts   Nishanth Menon
• [PATCH v2 16/18] omap3+: sr: make enable path use volt_data pointer   Nishanth Menon
• [PATCH v2 17/18] omap3630+: sr: add support for class 1.5   Nishanth Menon
• [PATCH v2 18/18] omap3430: sr: class3: restrict cpu to run on   Nishanth Menon
• [patch v2 0/3] arm: pmu: support pmu/perf on OMAP4   tom.leiming at gmail.com
• [patch v2 1/3] arm: introduce cross trigger interface helpers   tom.leiming at gmail.com
• [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling   tom.leiming at gmail.com
• [patch v2 3/3] arm: omap4: support pmu   tom.leiming at gmail.com
• [RFC PATCH] ARM: Use generic BUG() handler   Dave Martin
• [PATCH] i.MX some patches   Sascha Hauer
• [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files   Sascha Hauer
• [PATCH 2/4] ARM i.MX: iomux v1 initialization away from initcall   Sascha Hauer
• [PATCH 3/4] ARM i.MX31 lilly: remove incomplete otg support   Sascha Hauer
• [PATCH 4/4] ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceivers   Sascha Hauer
• [PATCH] ARM: imx/mx25_3ds: Fix build failure   Sascha Hauer
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Sascha Hauer
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Govindraj.R
• [PATCH] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices   Mark Brown
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Uwe Kleine-König
• [PATCH v8 0/1] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v8 1/1] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Jamie Iles
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   David Cohen
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Sascha Hauer
• [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling   Will Deacon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Maxime Coquelin
• [PATCH 0/3] ARM: tegra: PCI-e improvements   Mike Rapoport
• [PATCH 1/3] ARM: tegra: PCIE minor code refactoring   Mike Rapoport
• [PATCH 2/3] ARM: tegra: add PCI Express power gating   Mike Rapoport
• [PATCH 3/3] ARM: tegra: trimslice: initialize PCI-e only when running on TrimSlice   Mike Rapoport
• [PATCH] OMAP:iommu - pgd and pte entries weren't getting flushed out   David Cohen
• [patch v2 3/3] arm: omap4: support pmu   Santosh Shilimkar
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Santosh Shilimkar
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Uwe Kleine-König
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH v8 1/1] PRUSS UIO driver support   Arnd Bergmann
• [PATCH v8 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Sergei Shtylyov
• [PATCH v2 15/18] omap3+: sr: disable spamming interrupts   Sergei Shtylyov
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Sascha Hauer
• [PATCH] ARM: mx3/mx35_3ds: Use MX35 USB OTG Erratum   Fabio Estevam
• [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling   Ming Lei
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Linus Walleij
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Jamie Iles
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling   Will Deacon
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Gupta, Ramesh
• Question about free_pgd_slow ?   Rabin Vincent
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Gupta, Ramesh
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Gupta, Ramesh
• [PATCH v5] dmaengine: mxs-dma: add dma support for i.MX23/28   Koul, Vinod
• [GIT PULL] OMAP PM fixes for 2.6.38-rc   Kevin Hilman
• [PATCH 1/2] ARM: mx5/mx53_smd: Fix IOMUX for UART2   Fabio Estevam
• [PATCH 2/2] ARM: mx5/mx53_evk: Fix IOMUX for UART3   Fabio Estevam
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Uwe Kleine-König
• [PATCH 0/8 resend] dw_dmac: Extending support & minor fixes   Koul, Vinod
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32   Koul, Vinod
• [RFC PATCH 00/20] A15 architected timer support   Marc Zyngier
• [RFC PATCH 01/20] ARM: architected timers: move local timer support to percpu_timer.c   Marc Zyngier
• [RFC PATCH 02/20] ARM: omap2: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 03/20] ARM: exynos4: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 04/20] ARM: shmobile: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 05/20] ARM: tegra: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 06/20] ARM: ux500: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 07/20] ARM: versatile: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 08/20] ARM: remove unused twd_timer_setup stub   Marc Zyngier
• [RFC PATCH 09/20] ARM: architected timers: add A15 architected timers   Marc Zyngier
• [RFC PATCH 10/20] ARM: Platform dependent sched_clock() override   Marc Zyngier
• [RFC PATCH 11/20] ARM: architected timers: Add A15 specific sched_clock implementation   Marc Zyngier
• [RFC PATCH 12/20] ARM: versatile/vexpress: rework timer support   Marc Zyngier
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 14/20] ARM: omap4: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 15/20] ARM: exynos4: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 16/20] ARM: shmobile: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 17/20] ARM: tegra: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 18/20] ARM: ux500: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 19/20] ARM: simplify percpu_timer_setup   Marc Zyngier
• [RFC PATCH 20/20] ARM: simplify percpu_timer_ack   Marc Zyngier
• [PATCH v2 15/18] omap3+: sr: disable spamming interrupts   Nishanth Menon
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Nishanth Menon
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH 1/1] davinci: changed SRAM allocator to shared ram.   Nori, Sekhar
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• [PATCH/RFC 0/3] ARM: S5P: Add common DPHY control code for MIPI-CSIS/MIPI-DSIM devices   Sylwester Nawrocki
• [PATCH 1/3] ARM: S5P: Rename MIPI-CSIS header and update Copyright   Sylwester Nawrocki
• [PATCH 2/3] ARM: S5PV210: Add clock entries for MIPI DPHY control   Sylwester Nawrocki
• [PATCH 3/3] ARM: EXYNOS4: Add clock entries for MIPI DPHY control   Sylwester Nawrocki
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c   Tony Lindgren
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Sergei Shtylyov
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Nishanth Menon
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Tony Lindgren
• [PATCH 4/8 resend] dw_dmac: calling dwc_scan_descriptors from dwc_tx_status() after taking lock   Koul, Vinod
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Tony Lindgren
• [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC   H Hartley Sweeten
• [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish   Koul, Vinod
• [PATCH 7/8 resend] dw_dmac.c: Pass Channel Allocation Order from platform_data   Koul, Vinod
• [patch v2 0/2] Get watchdog reboot working on efika smartbook   Arnaud Patard (Rtp)
• [patch v2 1/2] mc13892: reboot on wdi event   Arnaud Patard (Rtp)
• [patch v2 2/2] efika mx/sb: enable watchdog   Arnaud Patard (Rtp)
• [PATCH 8/8 resend] dw_dmac.c: Pass Channel Priority from platform_data   Koul, Vinod
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Arnaud Patard (Rtp)
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Nguyen Dinh-R00091
• [patch v2 1/2] mc13892: reboot on wdi event   Uwe Kleine-König
• [patch v2 1/2] mc13892: reboot on wdi event   Arnaud Patard (Rtp)
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCH v8 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH v8 1/1] PRUSS UIO driver support   Arnd Bergmann
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   David Brown
• [patch 1/1] t5325: add audio support   Arnaud Patard (Rtp)
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• about MISC_DEVICES not being enabled in many defconfigs   Uwe Kleine-König
• [PATCH v8 1/1] PRUSS UIO driver support   Thomas Gleixner
• [patch 1/1] t5325: add audio support   Nicolas Pitre
• [PATCH 0/4] Initial patches for MSM display update   Carl Vanderlip
• [PATCH 1/4] video: msmfb: Put the partial update magic value into the fix_screen struct.   Carl Vanderlip
• [PATCH 2/4] [ARM] msm: mdp: Add support for RGBX 8888 image format.   Carl Vanderlip
• [PATCH 3/4] [ARM] msm_fb: Fix framebuffer console   Carl Vanderlip
• [PATCH 4/4] [ARM] msm: mdp: Set the correct pack pattern for XRGB/ARGB   Carl Vanderlip
• [PATCH 3/4] [ARM] msm_fb: Fix framebuffer console   Carl Vanderlip
• [patch 1/1] t5325: add audio support   Arnaud Patard (Rtp)
• [patch 1/1] t5325: add audio support   Arnaud Patard (Rtp)
• [PATCH 01/17] omap4: pm: Add omap WakeupGen module support   Kevin Hilman
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Uwe Kleine-König
• [PATCH 02/17] omap4: pm: Add SAR RAM support   Kevin Hilman
• [PATCH 03/17] omap4: Export scu base address   Kevin Hilman
• [PATCH 04/17] omap4: pm: Add CPUx OFF mode support   Kevin Hilman
• [Qualcomm PM8921 MFD 0/6] *** SUBJECT HERE ***   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 6/6] msm: board-8960: Add support for pm8921   adharmap at codeaurora.org
• [PATCHv2] omap:mailbox: resolve hang issue   Armando Uribe
• [PATCH 05/17] omap4: pm: Initialise all the clockdomains to supported states   Kevin Hilman
• [Qualcomm PM8921 MFD 0/6] pmic 8921 core and subdevices   adharmap at codeaurora.org
• [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes   Kevin Hilman
• [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver   Mark Brown
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Kevin Hilman
• [PATCH 09/17] omap4: pm: Add WakeupGen save/restore support   Kevin Hilman
• [PATCH 10/17] omap4: pm: Add L2 cache lowpower support   Kevin Hilman
• [PATCH] arm: etm: fix section mismatch warning   tom.leiming at gmail.com
• [PATCH] arm: omap: fix section mismatch warning   tom.leiming at gmail.com
• [PATCH 11/17] omap4: suspend: Add MPUSS RET and OFF support   Kevin Hilman
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   Mark Brown
• [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers   Joe Perches
• [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters   Kevin Hilman
• [PATCH 13/17] omap4: cpuidle: Basic CPUidle support   Kevin Hilman
• [PATCH 14/17] omap4: cpuidle: Add MPUSS RET OFF states   Kevin Hilman
• [PATCH 16/17] omap4: cpuidle: Allow debugfs control through enable_off_mode   Kevin Hilman
• [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes   Kevin Hilman
• [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support   Kevin Hilman
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Thomas Gleixner
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Kevin Hilman
• [PATCH] arm: omap: fix section mismatch warning   Tony Lindgren
• [PATCH] perf: add OMAP support for the new power events   Kevin Hilman
• [PATCH] ldp: Fix regulator mapping for ads7846 TS controller   Tony Lindgren
• [PATCH] ARM: mx51: Print silicon revision on boot   Fabio Estevam
• [PATCH 0/6] omap3: pm: Fixes for low power code   Kevin Hilman
• [PATCHv2] omap:mailbox: resolve hang issue   Tony Lindgren
• [PATCH v2] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board   Kukjin Kim
• [PATCH] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board   Kyungmin Park
• [PATCHv2] omap:mailbox: resolve hang issue   Guzman Lugo, Fernando
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH V5 6/6] pxa3xx_nand: clean the keep configure code   Lei Wen
• [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver   Abhijeet Dharmapurikar
• [PATCH 0/8 resend] dw_dmac: Extending support & minor fixes   viresh kumar
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32   viresh kumar
• [PATCH 4/8 resend] dw_dmac: calling dwc_scan_descriptors from dwc_tx_status() after taking lock   viresh kumar
• [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish   viresh kumar
• [PATCH 7/8 resend] dw_dmac.c: Pass Channel Allocation Order from platform_data   viresh kumar
• [PATCH 8/8 resend] dw_dmac.c: Pass Channel Priority from platform_data   viresh kumar
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32   Shiraz Hashim
• [PATCH 1/3] ARM: S5P: Rename MIPI-CSIS header and update Copyright   Kukjin Kim
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers   Abhijeet Dharmapurikar
• [PATCH/RFC 0/3] ARM: S5P: Add common DPHY control code for MIPI-CSIS/MIPI-DSIM devices   Kukjin Kim
• [PATCH V5 Resend] ST SPEAr: PCIE gadget suppport   pratyush
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Sricharan R
• [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Kukjin Kim
• [PATCH] ST SPEAr: PCIe Gadget: Documentation for support of multiple device   Pratyush Anand
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Richard Zhao
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCH 0/3] OMAP2+ hwmod fixes   Paul Walmsley
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [PATCH 0/2] Common struct clk implementation, v14   Jeremy Kerr
• [PATCH 1/2] Add a common struct clk   Jeremy Kerr
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support   Santosh Shilimkar
• [PATCH] ARM: EXYNOS4: Add ARMLEX4210 Board support file   ALIM AKHTAR
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration   Kukjin Kim
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration   Kukjin Kim
• [PATCH 1/1] CPU Frequency Scaling for VT8500/WM8505   Tony Prisk
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Saravana Kannan
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Saravana Kannan
• [PATCH] ARM: mx51: Print silicon revision on boot   Arnaud Patard (Rtp)
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [PATCH 2/2] ARM: imx3x: clean up ARCH_MX3X   Richard Zhao
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Uwe Kleine-König
• [PATCH] ARM: EXYNOS4: Add ARMLEX4210 Board support file   Kyungmin Park
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   Marc Zyngier
• [PATCH v8 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v8 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE   Rajendra Nayak
• [PATCH 1/3] ARM: S5P: Rename MIPI-CSIS header and update Copyright   Sylwester Nawrocki
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Uwe Kleine-König
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Catalin Marinas
• [PATCH V2 00/13] dmaengine/dw_dmac: Extending support & minor fixes   Viresh Kumar
• [PATCH V2 01/13] dw_dmac: Remove compilation dependency from AVR32 and put on HAVE_CLK   Viresh Kumar
• [PATCH V2 02/13] dw_dmac: Replace module_init() with subsys_initcall()   Viresh Kumar
• [PATCH V2 03/13] dw_dmac: Move single descriptor from dwc->queue to dwc->active_list in dwc_complete_all   Viresh Kumar
• [PATCH V2 04/13] dw_dmac: Calling dwc_scan_descriptors from dwc_tx_status() after taking lock   Viresh Kumar
• [PATCH V2 05/13] dw_dmac: Adding support for 64 bit access width for memcpy xfers   Viresh Kumar
• [PATCH V2 06/13] dw_dmac: Change value of DWC_MAX_COUNT to 4095.   Viresh Kumar
• [PATCH V2 07/13] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish   Viresh Kumar
• [PATCH V2 08/13] dw_dmac: Pass Channel Allocation Order from platform_data   Viresh Kumar
• [PATCH V2 09/13] dw_dmac: Pass Channel Priority from platform_data   Viresh Kumar
• [PATCH V2 10/13] dw_dmac: Changing type of src_master and dest_master to u8.   Viresh Kumar
• [PATCH V2 11/13] dw_dmac: Allow src/dst msize & flow controller to be configured at runtime   Viresh Kumar
• [PATCH V2 12/13] dw_dmac: Setting Default Burst length for transfers as 16.   Viresh Kumar
• [PATCH V2 13/13] avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize   Viresh Kumar
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Russell King - ARM Linux
• [PATCH] perf: add OMAP support for the new power events   Jean Pihet
• [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files   Russell King - ARM Linux
• [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files   Sascha Hauer
• [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files   Russell King - ARM Linux
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Shawn Guo
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Wolfram Sang
• [patch v3 0/3] arm: pmu: support pmu/perf on OMAP4   tom.leiming at gmail.com
• [patch v3 1/3] arm: introduce cross trigger interface helpers   tom.leiming at gmail.com
• [patch v3 2/3] arm: pmu: allow platform specific irq enable/disable handling   tom.leiming at gmail.com
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Sascha Hauer
• [patch v3 3/3] arm: omap4: support pmu   tom.leiming at gmail.com
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Shawn Guo
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration   Sylwester Nawrocki
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Thomas Gleixner
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Cousson, Benoit
• [PATCH v2 02/13] da850: pruss platform specific additions.   TK, Pratheesh Gangadhar
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Uwe Kleine-König
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Russell King - ARM Linux
• clcdfb: Question about clcdfb_check() routine   vksamar
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Sascha Hauer
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj
• [patch v2 1/2] mc13892: reboot on wdi event   Sergei Shtylyov
• [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour   Dave Martin
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Uwe Kleine-König
• [patch v2 2/2] efika mx/sb: enable watchdog   Sascha Hauer
• Compiling a kernel for armv5 + armv6   Sascha Hauer
• [PATCH] remove kconfig dependencies from ARCH_MX*/MACH_MX*   Sascha Hauer
• [PATCH 1/6] media/video i.MX: use IMX_HAVE_PLATFORM_* macros   Sascha Hauer
• [PATCH 2/6] rtc i.MX Dryice: use IMX_HAVE_PLATFORM_IMXDI_RTC to depend on   Sascha Hauer
• [PATCH 3/6] usb i.MX21: use IMX_HAVE_PLATFORM_IMX21_HCD to depend on   Sascha Hauer
• [PATCH 4/6] video i.MX: remove mx1 compile time dependencies   Sascha Hauer
• [PATCH 5/6] watchdog i.MX: use IMX_HAVE_PLATFORM_IMX2_WDT to depend on   Sascha Hauer
• [PATCH 6/6] mmc i.MX sdhci: use IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX to depend on   Sascha Hauer
• clcdfb: Question about clcdfb_check() routine   Russell King - ARM Linux
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Russell King - ARM Linux
• [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour   Russell King - ARM Linux
• [PATCH 4/6] video i.MX: remove mx1 compile time dependencies   Baruch Siach
• hard coded value for idcode field in struct cpu_table   Madhavi Manchala
• [PATCH 0/4] OMAP 3 and 4 i2c fixes   Andy Green
• [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access   Andy Green
• Compiling a kernel for armv5 + armv6   saeed bishara
• [PATCH 2/4] OMAP3 I2C document why cpu type and not peripheral unit ID used to probe   Andy Green
• [PATCH 3/4] OMAP3 and 4 i2c mark extended reg enums as extended only   Andy Green
• [PATCH 4/4] OMAP3 and 4 I2C use cpu type consistently for new register availability   Andy Green
• Compiling a kernel for armv5 + armv6   Russell King - ARM Linux
• Compiling a kernel for armv5 + armv6   Sascha Hauer
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [PATCH 4/6] video i.MX: remove mx1 compile time dependencies   Sascha Hauer
• [PATCH v2] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour   Dave Martin
• [RFC PATCH] ARM: Use generic BUG() handler   Dave Martin
• [PATCH 0/7] Various Samsung updates   Mark Brown
• [PATCH 1/7] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices   Mark Brown
• [PATCH 2/7] ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions   Mark Brown
• [PATCH 3/7] ARM: S3C64XX: Add clock for i2c1   Mark Brown
• [PATCH 4/7] ARM: S3C64XX: Tone down SDHCI debugging   Mark Brown
• [PATCH 5/7] ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()   Mark Brown
• [PATCH 6/7] ARM: SMDK6410: Fix build with WM1190 disabled and WM1192 enabled   Mark Brown
• [PATCH 7/7] ARM: SMDK6410: Update regulator names for debugfs compatiblity   Mark Brown
• [PATCH 0/7] Various Samsung updates   Ben Dooks
• [PATCH v3] ARM: EXYNOS4: add support for i2c PMICs on Universal_C210 board   Marek Szyprowski
• rmk out of action until further notice   Russell King - ARM Linux
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   Mark Brown
• [PATCH v3 0/3] OMAP: DSS2: Fix for DISPC core functional clock divider   Raghuveer Murthy
• [PATCH v3 1/3] OMAP: DSS2: Adding dss_features for independent core clk divider   Raghuveer Murthy
• [PATCH v3 2/3] OMAP: DSS2: Renaming register macro DISPC_DIVISOR(ch)   Raghuveer Murthy
• [PATCH v3 3/3] OMAP4: DSS2: Using dss_features to set independent core clock divider   Raghuveer Murthy
• [PATCH] ARM: mx51: Print silicon revision on boot   Fabio Estevam
• [PATCH 01/17] omap4: pm: Add omap WakeupGen module support   Santosh Shilimkar
• [PATCH 02/17] omap4: pm: Add SAR RAM support   Santosh Shilimkar
• [PATCH 03/17] omap4: Export scu base address   Santosh Shilimkar
• [PATCH v3 0/3] OMAP: DSS2: Fix for DISPC core functional clock divider   Tomi Valkeinen
• [PATCH 04/17] omap4: pm: Add CPUx OFF mode support   Santosh Shilimkar
• [PATCH 05/17] omap4: pm: Initialise all the clockdomains to supported states   Santosh Shilimkar
• [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes   Santosh Shilimkar
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Santosh Shilimkar
• [PATCH 10/17] omap4: pm: Add L2 cache lowpower support   Santosh Shilimkar
• [PATCH 11/17] omap4: suspend: Add MPUSS RET and OFF support   Santosh Shilimkar
• [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters   Santosh Shilimkar
• [PATCH] ARM: mx51: Print silicon revision on boot   Sascha Hauer
• Memory Compaction feature.   Ralf Baechle
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Kevin Hilman