[RFC PATCH 18/20] ARM: ux500: dynamically register local timer setup function
Marc Zyngier
marc.zyngier at arm.com
Wed Mar 2 11:53:24 EST 2011
Cc: Srinidhi Kasagar <srinidhi.kasagar at stericsson.com>
Cc: Linus Walleij <linus.walleij at stericsson.com>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
arch/arm/mach-ux500/Makefile | 1 -
arch/arm/mach-ux500/cpu.c | 12 ++++++++++++
arch/arm/mach-ux500/localtimer.c | 26 --------------------------
3 files changed, 12 insertions(+), 27 deletions(-)
delete mode 100644 arch/arm/mach-ux500/localtimer.c
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index b549a8f..224bc74 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o
obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 5a43107..e043d47 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -8,12 +8,15 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/clockchips.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
+#include <asm/irq.h>
#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
#include <plat/mtu.h>
#include <mach/hardware.h>
@@ -115,6 +118,13 @@ static int ux500_l2x0_init(void)
early_initcall(ux500_l2x0_init);
#endif
+#ifdef CONFIG_LOCAL_TIMERS
+static void __cpuinit ux500_local_timer_setup(struct clock_event_device *evt)
+{
+ evt->irq = IRQ_LOCALTIMER;
+}
+#endif
+
static void __init ux500_timer_init(void)
{
#ifdef CONFIG_LOCAL_TIMERS
@@ -125,6 +135,8 @@ static void __init ux500_timer_init(void)
twd_base = __io_address(U8500_TWD_BASE);
else
ux500_unknown_soc();
+
+ twd_timer_register_setup(ux500_local_timer_setup);
#endif
if (cpu_is_u5500())
mtu_base = __io_address(U5500_MTU0_BASE);
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
deleted file mode 100644
index c648725..0000000
--- a/arch/arm/mach-ux500/localtimer.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson
- * Srinidhi Kasagar <srinidhi.kasagar at stericsson.com>
- *
- * This file is heavily based on relaview platform, almost a copy.
- *
- * Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/clockchips.h>
-
-#include <asm/irq.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
- evt->irq = IRQ_LOCALTIMER;
- return 0;
-}
--
1.7.0.4
More information about the linux-arm-kernel
mailing list