March 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Mar 1 00:58:49 EST 2011
Ending: Wed Mar 23 15:55:37 EDT 2011
Messages: 2723

• [patch v2 0/2] Get watchdog reboot working on efika smartbook   Arnaud Patard (Rtp)
• [patch v2 1/2] mc13892: reboot on wdi event   Arnaud Patard (Rtp)
• [patch v2 2/2] efika mx/sb: enable watchdog   Arnaud Patard (Rtp)
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Arnaud Patard (Rtp)
• [patch v2 1/2] mc13892: reboot on wdi event   Arnaud Patard (Rtp)
• [patch 1/1] t5325: add audio support   Arnaud Patard (Rtp)
• [patch 1/1] t5325: add audio support   Arnaud Patard (Rtp)
• [patch 1/1] t5325: add audio support   Arnaud Patard (Rtp)
• [PATCH] ARM: mx51: Print silicon revision on boot   Arnaud Patard (Rtp)
• [PATCH] ARM: mx51: Print silicon revision on boot   Arnaud Patard (Rtp)
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   Arnaud Patard (Rtp)
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   Arnaud Patard (Rtp)
• [PATCHv2 2/2] ARM: mx51: Add support for low power suspend on MX51   Arnaud Patard (Rtp)
• [PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51   Arnaud Patard (Rtp)
• [PATCH 2/7] add the common code for GPMI driver   =?utf-8?Q?Lothar_Wa=C3=9Fmann?=
• [PATCH] ARM: EXYNOS4: Add ARMLEX4210 Board support file   ALIM AKHTAR
• [PATCH 0/9] Support for NXP LPC2K SoCs   Ithamar R. Adema
• [PATCH 1/9] lpc2k: Core support   Ithamar R. Adema
• [PATCH 2/9] lpc2k: Exception vector handling   Ithamar R. Adema
• [PATCH 3/9] lpc2k: clk API   Ithamar R. Adema
• [PATCH 4/9] lpc2k: generic time and clockevents   Ithamar R. Adema
• [PATCH 5/9] lpc2k: gpiolib   Ithamar R. Adema
• [PATCH 6/9] lpc2k: multifunction pin configuration   Ithamar R. Adema
• [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board   Ithamar R. Adema
• [PATCH 8/9] lpc2k: Add UART, SSP, and MCI devices   Ithamar R. Adema
• [PATCH 9/9] lpc2k: defconfig for NXP LPC2K platform   Ithamar R. Adema
• [PATCH 2/9] lpc2k: Exception vector handling   Ithamar R. Adema
• [PATCH 1/9] lpc2k: Core support   Ithamar R. Adema
• [PATCH 4/9] lpc2k: generic time and clockevents   Ithamar R. Adema
• [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board   Ithamar R. Adema
• [PATCH 1/9] lpc2k: Core support   Ithamar R. Adema
• [PATCH 3/9] lpc2k: clk API   Ithamar R. Adema
• [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board   Ithamar R. Adema
• [PATCH 3/9] lpc2k: clk API   Ithamar R. Adema
• [PATCH v2 0/9] Support for NXP LPC2K SoCs   Ithamar R. Adema
• [PATCH v2 1/9] lpc2k: Core support   Ithamar R. Adema
• [PATCH v2 2/9] lpc2k: Exception vector handling   Ithamar R. Adema
• [PATCH v2 3/9] lpc2k: clk API   Ithamar R. Adema
• [PATCH v2 4/9] lpc2k: generic time and clockevents   Ithamar R. Adema
• [PATCH v2 5/9] lpc2k: gpiolib   Ithamar R. Adema
• [PATCH v2 6/9] lpc2k: multifunction pin configuration   Ithamar R. Adema
• [PATCH v2 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board   Ithamar R. Adema
• [PATCH v2 8/9] lpc2k: Add UART, SSP, and MCI devices   Ithamar R. Adema
• [PATCH v2 9/9] lpc2k: defconfig for NXP LPC2K platform   Ithamar R. Adema
• [PATCH v2 1/9] lpc2k: Core support   Ithamar R. Adema
• [PATCH v2 4/9] lpc2k: generic time and clockevents   Ithamar R. Adema
• [PATCH v2 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board   Ithamar R. Adema
• [PATCH v2 2/9] lpc2k: Exception vector handling   Ithamar R. Adema
• [PATCH v2 4/9] lpc2k: generic time and clockevents   Ithamar R. Adema
• [PATCH v2 6/9] lpc2k: multifunction pin configuration   Ithamar R. Adema
• [PATCH v3 0/9] Support for NXP LPC2K SoCs   Ithamar R. Adema
• [PATCH v3 1/9] lpc2k: Core support   Ithamar R. Adema
• [PATCH v3 2/9] lpc2k: Exception vector handling   Ithamar R. Adema
• [PATCH v3 3/9] lpc2k: clk API   Ithamar R. Adema
• [PATCH v3 4/9] lpc2k: generic time and clockevents   Ithamar R. Adema
• [PATCH v3 5/9] lpc2k: gpiolib   Ithamar R. Adema
• [PATCH v3 6/9] lpc2k: multifunction pin configuration   Ithamar R. Adema
• [PATCH v3 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board   Ithamar R. Adema
• [PATCH v3 8/9] lpc2k: Add UART, SSP, and MCI devices   Ithamar R. Adema
• [PATCH v3 9/9] lpc2k: defconfig for NXP LPC2K platform   Ithamar R. Adema
• [PATCH v3 3/9] lpc2k: clk API   Ithamar R. Adema
• ALSA issue on DA850/OMAP-L138/AM18x   Christophe Aeschlimann
• ALSA issue on DA850/OMAP-L138/AM18x   Christophe Aeschlimann
• ALSA issue on DA850/OMAP-L138/AM18x   Christophe Aeschlimann
• ALSA issue on DA850/OMAP-L138/AM18x   Christophe Aeschlimann
• [PATCH] ST SPEAr: PCIe Gadget: Documentation for support of multiple device   Pratyush Anand
• [PATCH v2 0/1] ARM: QQ2440 machine architecture   Domenico Andreoli
• [PATCH v2 1/1] Add core support for QQ2440.   Domenico Andreoli
• [PATCH v2 0/2] CS89x0: add QQ2440 networking support   Domenico Andreoli
• [PATCH v2 1/2] CS89x0: Finish transition to CS89x0_NONISA_IRQ   Domenico Andreoli
• [PATCH v2 2/2] CS89x0: Add networking support for QQ2440   Domenico Andreoli
• [PATCH v3] ARM: add QQ2440 machine architecture   Domenico Andreoli
• Updated mach-types update   Domenico Andreoli
• MMC quirks relating to performance/lifetime.   Jens Axboe
• MMC quirks relating to performance/lifetime.   Jens Axboe
• Memory Compaction feature.   Ralf Baechle
• [patch v1 3/3] arm: omap4: support pmu   Felipe Balbi
• [PATCH] DM644x EVM: register MUSB device earlier   Felipe Balbi
• [PATCH] DM644x EVM: register MUSB device earlier   Felipe Balbi
• [PATCH] DM644x EVM: register MUSB device earlier   Felipe Balbi
• [PATCH] DM644x EVM: register MUSB device earlier   Felipe Balbi
• [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The patch also adds support for the second LED that is green when off and red when on. Signed-off-by: Robin Becker <robin at reportlab.com>   Robin Becker
• [PATCH] arm: mach-kirkwood: add led in sheevaplug-setup.c   Robin Becker
• ALSA issue on DA850/OMAP-L138/AM18x   Bedia, Vaibhav
• ALSA issue on DA850/OMAP-L138/AM18x   Bedia, Vaibhav
• [PATCH RFC] arm: mini2440: Fix uda134x codec problem.   Marek Belisko
• [PATCH] omap: zoom: host should not pull up wl1271's irq line   Ohad Ben-Cohen
• [PATCH] hwspinlock: depend on OMAP4   Ohad Ben-Cohen
• [GIT PULL] omap changes for v2.6.39 merge window   Ohad Ben-Cohen
• [PATCH 3/8] Add a mfd IPUv3 driver   Arnd Bergmann
• [PATCH 3/8] Add a mfd IPUv3 driver   Arnd Bergmann
• [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Arnd Bergmann
• [PATCH v8 1/1] PRUSS UIO driver support   Arnd Bergmann
• [PATCH v8 1/1] PRUSS UIO driver support   Arnd Bergmann
• [PATCH v9 1/1] PRUSS UIO driver support   Arnd Bergmann
• [PATCH v10 1/1] PRUSS UIO driver support   Arnd Bergmann
• [PATCH v10 1/1] PRUSS UIO driver support   Arnd Bergmann
• [PATCH 1/3] video: mxsfb: smarten the code a little bit   Arnd Bergmann
• [PATCH v9 1/1] PRUSS UIO driver support   Arnd Bergmann
• MMC quirks relating to performance/lifetime.   Arnd Bergmann
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv1 2/2] ux500: Export U8500 SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Arnd Bergmann
• [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support.   Arnd Bergmann
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Arnd Bergmann
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Arnd Bergmann
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [PATCH v3 1/7] mfd: add pruss mfd driver.   Arnd Bergmann
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Arnd Bergmann
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Arnd Bergmann
• [PATCH 10/10] ux500: adding config file options for snowball board.   Arnd Bergmann
• [PATCH 01/10] ux500: Introducing foundation for snowball board.   Arnd Bergmann
• [PATCH 02/10] ux500: Adding new board files for snowball.   Arnd Bergmann
• [PATCH 04/10] ux500: Adding sdi support on snowball.   Arnd Bergmann
• [PATCH 06/10] ux500: added snowball-netev with latest fixes   Arnd Bergmann
• [PATCH 07/10] ux500: added snowball-digio.c   Arnd Bergmann
• [PATCH 08/10] ux500: hooking up netdev and digio to compilation.   Arnd Bergmann
• [PATCH 09/10] ux500: Addressing irq header file dependency for snowball.   Arnd Bergmann
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Arnd Bergmann
• [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod   Arnd Bergmann
• [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod   Arnd Bergmann
• PATCH [1/1] Clock support for VT8500/WM8505   Arnd Bergmann
• [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper   Arnd Bergmann
• [PATCH v3 7/7] tty: add pruss SUART driver   Arnd Bergmann
• Support for ARM940T core Samsung S3C2510A MCU under Linux   Arnd Bergmann
• Support for ARM940T core Samsung S3C2510A MCU under Linux   Arnd Bergmann
• Enable UART3 on TX28   Arnd Bergmann
• [PATCH] ARM: Use asm-generic/sizes.h   Arnd Bergmann
• [PATCH] ARM: Use asm-generic/sizes.h   Arnd Bergmann
• Support for ARM940T core Samsung S3C2510A MCU under Linux   Arnd Bergmann
• [PATCH v17 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod   Arnd Bergmann
• [PATCH] arm: handle ptrace requests to change PC during interrupted system calls   Arnd Bergmann
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   Arnd Bergmann
• reboot/kexec in 2.6.38   Eric W. Biederman
• [PATCH 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Artem Bityutskiy
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear   Artem Bityutskiy
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear   Artem Bityutskiy
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Artem Bityutskiy
• [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28   Artem Bityutskiy
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Artem Bityutskiy
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Artem Bityutskiy
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• [PATCH v2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• [PATCH v2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   John Bonesio
• [PATCH 00/20] world-writable files in sysfs and debugfs   James Bottomley
• [Security] [PATCH 00/20] world-writable files in sysfs and debugfs   James Bottomley
• [Security] [PATCH 00/20] world-writable files in sysfs and debugfs   James Bottomley
• [Security] [PATCH 00/20] world-writable files in sysfs and debugfs   James Bottomley
• [PATCH 0/4] SCM fixes and updates   Stephen Boyd
• [PATCH] ARM: hw_breakpoint: Fix newlines in WARNings   Stephen Boyd
• [PATCH 0/3] Peripheral image loader (PIL)   Stephen Boyd
• [PATCH 1/3] msm: 8660: Add clock control regions to iomap   Stephen Boyd
• [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver   Stephen Boyd
• [PATCH 3/3] msm: documentation: Add pil documentation   Stephen Boyd
• [PATCH 1/3] msm: 8660: Add clock control regions to iomap   Stephen Boyd
• [PATCH] ARM: Merge v6 and v7 DEBUG_LL DCC support   Stephen Boyd
• [PATCH] msm: uncompress.h: Fix putc unused warning   Stephen Boyd
• [PATCHv2] ARM: Merge v6 and v7 DEBUG_LL DCC support   Stephen Boyd
• [PATCHv2 4/4] msm: scm: Get cacheline size from CTR   Stephen Boyd
• [PATCH 16/20] video: msm: Set the EBI1 clock to 128MHz when performing blits   Stephen Boyd
• [PATCH] ARM: Use asm-generic/sizes.h   Stephen Boyd
• [PATCH] ARM: Use asm-generic/sizes.h   Stephen Boyd
• [PATCH] ARM: Use asm-generic/sizes.h   Stephen Boyd
• [RFC PATCH 5/5] RFC: msm: sps: Smart Peripheral System (SPS) driver.   David Brown
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   David Brown
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   David Brown
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   David Brown
• [PATCH] MAINTAINERS: Update MSM maintainers   David Brown
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   David Brown
• [PATCH v3 1/2] MAINTAINERS: Add drivers/platform/msm to MSM subsystem   David Brown
• [PATCH 0/4] Initial patches for MSM display update   David Brown
• [PATCH 1/4] msm: iommu: Clock control for the IOMMU driver   David Brown
• [PATCH FYI] msm: Dummy 8960 clock driver   David Brown
• [PATCH 0/4] SCM fixes and updates   David Brown
• [PATCH 1/3] msm: 8660: Add clock control regions to iomap   David Brown
• [PATCH] msm: gpio-v2: Add missing BIT field macros for interrupt control   David Brown
• [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver   David Brown
• [Git pull] MSM for v2.6.39   David Brown
• [Git pull] MSM for v2.6.39   David Brown
• [PATCH 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Mark Brown
• [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Mark Brown
• [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Mark Brown
• [PATCH] S3C64XX: Fix keypad setup to configure correct number of rows   Mark Brown
• [PATCH v2 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi.   Mark Brown
• [PATCH] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices   Mark Brown
• [PATCH] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices   Mark Brown
• [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver   Mark Brown
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   Mark Brown
• [PATCH 0/7] Various Samsung updates   Mark Brown
• [PATCH 1/7] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices   Mark Brown
• [PATCH 2/7] ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions   Mark Brown
• [PATCH 3/7] ARM: S3C64XX: Add clock for i2c1   Mark Brown
• [PATCH 4/7] ARM: S3C64XX: Tone down SDHCI debugging   Mark Brown
• [PATCH 5/7] ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()   Mark Brown
• [PATCH 6/7] ARM: SMDK6410: Fix build with WM1190 disabled and WM1192 enabled   Mark Brown
• [PATCH 7/7] ARM: SMDK6410: Update regulator names for debugfs compatiblity   Mark Brown
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   Mark Brown
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   Mark Brown
• [PATCH 7/7] ARM: SMDK6410: Update regulator names for debugfs compatiblity   Mark Brown
• [PATCH] Exynos4: Remove meaningless REGULATOR config option   Mark Brown
• [PATCH] ARM: imx: Add tlv320aic32x4 board specific code to Visstrim_M10.   Mark Brown
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Mark Brown
• [PATCH 0/3] Tegra i2c board changes + defconfig update   Mark Brown
• [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator   Mark Brown
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mark Brown
• [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   Mark Brown
• [Qualcomm PM8921 MFD v2 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem   Mark Brown
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mark Brown
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mark Brown
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mark Brown
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Mark Brown
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Mark Brown
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Mark Brown
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Mark Brown
• [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init   Mark Brown
• [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   Mark Brown
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Mark Brown
• Newbies question: Which tree do I base my mc13783-regulator patches on?   Mark Brown
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Mark Brown
• [PATCH RFC] arm: mini2440: Fix uda134x codec problem.   Mark Brown
• [PATCH RFC] arm: mini2440: Fix uda134x codec problem.   Mark Brown
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Mark Brown
• [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init   Mark Brown
• [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init   Mark Brown
• [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init   Mark Brown
• [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Mark Brown
• [PATCH v3 1/7] mfd: add pruss mfd driver.   Mark Brown
• [PATCH] Input: tca6416-keypad: Change to module_init()   Mark Brown
• [PATCH] Input: tca6416-keypad: Change to module_init()   Mark Brown
• [PATCH v3 1/7] mfd: add pruss mfd driver.   Mark Brown
• [PATCH] Input: tca6416-keypad: Change to module_init()   Mark Brown
• [PATCH] Input: tca6416-keypad: Change to module_init()   Mark Brown
• multiple definition of show_mem for pxa   Jonathan Cameron
• PXA270 Random Hangs at Low Core Freq   Michael Cashwell
• staging: iio: ak8975: make gpio platdata mandatory   Naveen Krishna Ch
• staging: iio: ak8975: make gpio platdata mandatory   Naveen Krishna Ch
• staging: iio: ak8975: make gpio platdata mandatory   Naveen Krishna Ch
• [PATCH v2] arm: cmpxchg syscall should data abort if page not write   Ashwin Chaugule
• [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency   Ashwin Chaugule
• [PATCH 1/2] ARM imx53: add pwm devices support   Jason Chen
• [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device   Jason Chen
• [PATCH 1/2] ARM imx53: add pwm devices support   Jason Chen
• [PATCH 1/2] ARM imx53: add pwm devices support   Jason Chen
• [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device   Jason Chen
• [PATCH 1/2] ARM imx53: add pwm devices support   Jason Chen
• [PATCH] ARM: mx53/loco: add pwm backlight device   Jason Chen
• [Q] Booting kernel from NFS?   Steve Chen
• [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU   KyongHo Cho
• [PATCH 1/2] ARM: EXYNOS4: Enhancement of System MMU driver   KyongHo Cho
• [PATCH 2/2] ARM: EXYNOS4: Implement Clock gating for System MMU   KyongHo Cho
• [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU   KyongHo Cho
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   KyongHo Cho
• [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU   KyongHo Cho
• Why don't we have atomic_set_mask()?   KyongHo Cho
• Why don't we have atomic_set_mask()?   KyongHo Cho
• [PATCH] arm: cmpxchg syscall should data abort if page not write or not young   Po-Yu Chuang
• [PATCH] arm: cmpxchg syscall should data abort if page not write or not young   Po-Yu Chuang
• [PATCH v2] arm: cmpxchg syscall should data abort if page not write   Po-Yu Chuang
• [PATCH v2] arm: cmpxchg syscall should data abort if page not write   Po-Yu Chuang
• [PATCH v2] arm: cmpxchg syscall should data abort if page not write   Po-Yu Chuang
• [PATCH v2] arm: cmpxchg syscall should data abort if page not write   Po-Yu Chuang
• [PATCH 09/10] MCDE: Add build files and bus   Rob Clark
• [PATCH 09/10] MCDE: Add build files and bus   Rob Clark
• [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it   Lars-Peter Clausen
• [PATCH 1/2] USB: s3c2410_udc: Add common implementation for GPIO controlled pullups   Lars-Peter Clausen
• [PATCH 2/2] ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation   Lars-Peter Clausen
• [PATCH v2 1/1] Add core support for QQ2440.   Lars-Peter Clausen
• [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions   Alexander Clouter
• [PATCH] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx   Alexander Clouter
• [PATCH] [ARM] orion5x: fix compiler cast warnings in ts78xx-setup.c   Alexander Clouter
• [PATCH] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx   Alexander Clouter
• [PATCHv2] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx   Alexander Clouter
• [PATCH] ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c   Alexander Clouter
• [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support   Richard Cochran
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   David Cohen
• [PATCH] OMAP:iommu - pgd and pte entries weren't getting flushed out   David Cohen
• [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL   David Cohen
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Maxime Coquelin
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Maxime Coquelin
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Maxime Coquelin
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Maxime Coquelin
• [RFC PATCHv1 0/2] Export SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv1 2/2] ux500: Export U8500 SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv1 0/2] Export SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv2 0/2] Export SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv2 2/2] ux500: Export U8500 SoC info through sysfs   Maxime Coquelin
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Maxime Coquelin
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display   Cousson, Benoit
• [PATCH 0/3] OMAP2+ hwmod fixes   Cousson, Benoit
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Cousson, Benoit
• [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access   Cousson, Benoit
• [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access   Cousson, Benoit
• [PATCH 2/4] OMAP3 I2C document why cpu type and not peripheral unit ID used to probe   Cousson, Benoit
• [PATCH 3/4] OMAP3 and 4 i2c mark extended reg enums as extended only   Cousson, Benoit
• [PATCH 4/4] OMAP3 and 4 I2C use cpu type consistently for new register availability   Cousson, Benoit
• [PATCH 0/4] OMAP 3 and 4 i2c fixes   Cousson, Benoit
• [PATCH 3/4] OMAP3 and 4 i2c mark extended reg enums as extended only   Cousson, Benoit
• [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access   Cousson, Benoit
• [PATCH] OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interface   Cousson, Benoit
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Cousson, Benoit
• [PATCH 1/2] Revert "OMAP4: hwmod data: Prevent timer1 to be reset and idle during init"   Benoit Cousson
• [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access   Cousson, Benoit
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Cousson, Benoit
• [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Cousson, Benoit
• [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Cousson, Benoit
• [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver   Cousson, Benoit
• [PATCH 2 01/18] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c   Cousson, Benoit
• [PATCH 2 04/18] I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision   Cousson, Benoit
• [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr   Cousson, Benoit
• [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver   Cousson, Benoit
• [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr   Cousson, Benoit
• [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test   Cousson, Benoit
• [PATCH 2/2] omap4: mux: Remove duplicate mux modes   Cousson, Benoit
• [PATCH 2/2] omap4: mux: Remove duplicate mux modes   Cousson, Benoit
• [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value   Cousson, Benoit
• [PATCH v2 13/13] tty: pruss SUART driver   Alan Cox
• [PATCH v3 7/7] tty: add pruss SUART driver   Alan Cox
• Store buffer and l2x0_cache_sync   Colin Cross
• Common suspend and resume with L2 cache on   Colin Cross
• [PATCH 0/3] ARM: tegra: PCI-e improvements   Colin Cross
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers   Colin Cross
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers   Colin Cross
• [PATCH 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook   Colin Cross
• [PATCH 2/2] Add a default config for PAZ00   Colin Cross
• [PATCH] ARM: twd: Adjust localtimer frequency withcpufreqnotifiers   Colin Cross
• [PATCH 0/3] Tegra i2c board changes + defconfig update   Colin Cross
• [PATCH 0/3] Tegra i2c board changes + defconfig update   Colin Cross
• [PATCH v3 6/7] ARM: smp_twd: add clock api support   Colin Cross
• ARM Tegra updates for 2.6.39   Colin Cross
• hard coded value for idcode field in struct cpu_table   Sławomir Cygan
• hard coded value for idcode field in struct cpu_table   Sławomir Cygan
• [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path   Hiroshi DOYU
• [PATCH 0/2] add Samsung SoC based MIPI-DSI support.   InKi Dae
• [PATCH/RFC 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update   InKi Dae
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   InKi Dae
• [PATCH 1/2] s5pc110: add clock gate for MIPI-DSI controller.   InKi Dae
• [PATCH 2/2] s5pc110: add MIPI-DSI controller driver.   InKi Dae
• [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Magnus Damm
• [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Magnus Damm
• [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Magnus Damm
• [PATCH] Input: tca6416-keypad: Change to module_init()   Magnus Damm
• [PATCH] Input: tca6416-keypad: Change to module_init()   Magnus Damm
• [PATCH] Input: tca6416-keypad: Change to module_init()   Magnus Damm
• [PATCH] Input: tca6416-keypad: Change to module_init()   Magnus Damm
• [PATCH] Input: tca6416-keypad: Change to module_init()   Magnus Damm
• [PATCH] Input: tca6416-keypad: Change to module_init()   Magnus Damm
• [PATCH] Input: tca6416-keypad: Change to module_init()   Magnus Damm
• [PATCH 1/4] msm: scm: Mark inline asm as volatile   Will Deacon
• [PATCH 2/4] msm: scm: Fix improper register assignment   Will Deacon
• [PATCH 3/6] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 2/4] msm: scm: Fix improper register assignment   Will Deacon
• [PATCH 2/3] arm: pmu: support pmu irq routed from CTI   Will Deacon
• [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used   Will Deacon
• [patch v1 2/3] arm: pmu: support pmu irq routed from CTI   Will Deacon
• [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling   Will Deacon
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling   Will Deacon
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Will Deacon
• [PATCH 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Will Deacon
• [PATCH 1/2] ARM: fix compiling error due to debug_info change   Will Deacon
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Way operationcan cause data corruption   Will Deacon
• [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump   Will Deacon
• [PATCH v2 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Will Deacon
• [PATCH v3 0/7] Migrate GIC to fasteoi flow control   Will Deacon
• [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers   Will Deacon
• [PATCH 2/7] ARM: omap: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 3/7] ARM: tegra: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 4/7] ARM: s5pv310: update IRQ combiner to use chained entry/exit functions   Will Deacon
• [PATCH 5/7] ARM: msm: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 6/7] ARM: nmk: update GPIO chained IRQ handler to entry/exit functions   Will Deacon
• [PATCH 7/7] ARM: gic: use handle_fasteoi_irq for SPIs   Will Deacon
• [PATCH] ARM: hw_breakpoint: Fix newlines in WARNings   Will Deacon
• [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump   Will Deacon
• [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump   Will Deacon
• memmap_valid_within problem with sparsely populated sections   Will Deacon
• [PATCH v3 0/7] Migrate GIC to fasteoi flow control   Will Deacon
• Single-stepping ARMv7 with KDB...   Will Deacon
• [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers   Will Deacon
• [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers   Will Deacon
• [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation   Will Deacon
• [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend   Will Deacon
• [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation   Will Deacon
• [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend   Will Deacon
• Build warning in todays linus/master   Will Deacon
• [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend   Will Deacon
• [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend   Will Deacon
• [PATCH] ARM: memmap: only free allocated memmap entries when using SPARSEMEM   Will Deacon
• Single-stepping ARMv7 with KDB...   Will Deacon
• Single-stepping ARMv7 with KDB...   Will Deacon
• memmap_valid_within problem with sparsely populated sections   Will Deacon
• [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation   Will Deacon
• [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation   Will Deacon
• [PATCH v2] ARM: perf: reset counters on all CPUs during initialisation   Will Deacon
• [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency   Will Deacon
• [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency   Will Deacon
• [PATCH v2 5/9] OMAP2+: hwmod: rename some init functions   DebBarma, Tarun Kanti
• [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Abhijeet Dharmapurikar
• [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Abhijeet Dharmapurikar
• [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Abhijeet Dharmapurikar
• [PATCH 0/2] ARM: tegra: Add Toshiba AC100 support   Marc Dietrich
• [PATCH 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook   Marc Dietrich
• [PATCH 2/2] Add a default config for PAZ00   Marc Dietrich
• [PATCH v2 0/2] ARM: tegra: Add Toshiba AC100 support   Marc Dietrich
• [PATCH 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook   Marc Dietrich
• [PATCH v2 0/2] ARM: tegra: Add Toshiba AC100 support   Marc Dietrich
• [PATCH v2 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook   Marc Dietrich
• [PATCH v2 2/2] Add PAZ00 to tegra_defconfig   Marc Dietrich
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Marc Dietrich
• IRQ handler under load - slow response   Kurt Van Dijck
• IRQ handler under load - slow response   Kurt Van Dijck
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Nguyen Dinh-R00091
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   Nguyen Dinh-R00091
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   Nguyen Dinh-R00091
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   Nguyen Dinh-R00091
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   Nguyen Dinh-R00091
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   Nguyen Dinh-R00091
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   Nguyen Dinh-R00091
• [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI   Nguyen Dinh-R00091
• [PATCHv4 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI   Nguyen Dinh-R00091
• [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51   Nguyen Dinh-R00091
• i.MX31 suspend and VSTBY question   Nguyen Dinh-R00091
• i.MX31 suspend and VSTBY question   Nguyen Dinh-R00091
• dma cache coherency issue   Dongas
• dma cache coherency issue   Dongas
• [PATCH 2/6] ARM: pxa2xx: reorganize I2C files   Ben Dooks
• [PATCH 3/6] i2c-pxa2xx: Add PCI support for PXA I2C controller   Ben Dooks
• [PATCH 0/7] Various Samsung updates   Ben Dooks
• CHROMIUM: arm: tegra: Add platfrom devices for Cypress trackpad (issue6623011)   Ben Dooks
• [PATCH] i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup   Ben Dooks
• [patch v4 1/3] arm: introduce cross trigger interface helpers   Ben Dooks
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Ben Dooks
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Ben Dooks
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Ben Dooks
• [PATCH 1/2] i2c-pxa2xx: Fix register offsets   Ben Dooks
• [PATCH RFC] arm: mini2440: Fix uda134x codec problem.   Ben Dooks
• CHROMIUM: arm: tegra: Add platfrom devices for Cypress trackpad (issue6623011)   Dudley Du
• [Qualcomm PM8921 MFD v2 1/6] mfd: pm8921: Add PMIC 8921 core driver   Randy Dunlap
• [PATCH v3 7/7] tty: add pruss SUART driver   Randy Dunlap
• [PATCH] kbuild: reenable section mismatch analysis   Randy Dunlap
• [PATCH] [ARM] tlb: fix build error with CONFIG_SWAP=n   Dmitry Eremin-Solenikov
• [PATCH 1/2] ARM imx53: add pwm devices support   Fabio Estevam
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Fabio Estevam
• [PATCH 2/5] ARM: mx31_3ds: Add I2C support   Fabio Estevam
• [PATCH 3/5] ARM: mx27_3ds: Add I2C support   Fabio Estevam
• [PATCH 4/5] ARM: mx25_3ds: Add I2C support   Fabio Estevam
• [PATCH 5/5] ARM: mx53_smd: Add I2C support   Fabio Estevam
• [PATCH 2/2] ARM: mx3/pcm043: fix build failure   Fabio Estevam
• [PATCH] ARM: imx/mx25_3ds: Fix build failure   Fabio Estevam
• [PATCH V4 1/4] ARM: imx53_loco: add esdhc device support   Fabio Estevam
• [PATCH] ARM: mx3/mx35_3ds: Use MX35 USB OTG Erratum   Fabio Estevam
• [PATCH 1/2] ARM: mx5/mx53_smd: Fix IOMUX for UART2   Fabio Estevam
• [PATCH 2/2] ARM: mx5/mx53_evk: Fix IOMUX for UART3   Fabio Estevam
• [PATCH] ARM: mx51: Print silicon revision on boot   Fabio Estevam
• [PATCH] ARM: mx51: Print silicon revision on boot   Fabio Estevam
• [PATCH v2] ARM: mx51: Print silicon revision on boot   Fabio Estevam
• [PATCH v3] ARM: mx51: Print silicon revision on boot   Fabio Estevam
• [PATCH 1/2] ARM: mx5/babbage: Remove unneeded gpio_set_value call   Fabio Estevam
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Fabio Estevam
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Fabio Estevam
• [PATCH 1/4] ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset   Fabio Estevam
• [PATCH 2/4] ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset   Fabio Estevam
• [PATCH 3/4] ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset   Fabio Estevam
• [PATCH 4/4] ARM: mx5/mx53_evk: Make the reset pin name more meaningful   Fabio Estevam
• [PATCH v2 1/4] ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset   Fabio Estevam
• [PATCH v2 2/4] ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset   Fabio Estevam
• [PATCH v2 3/4] ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset   Fabio Estevam
• [PATCH v2 4/4] ARM: mx5/mx53_evk: Make the reset pin name more meaningful   Fabio Estevam
• [PATCH v4] ARM: mx51: Print silicon revision on boot   Fabio Estevam
• [PATCHv4 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI   Fabio Estevam
• [PATCH 5/7] add GPMI support for imx28   Florian Fainelli
• [PATCH 3/7] add the database for the NANDs   Florian Fainelli
• [PATCH 1/8] macb: unify at91 and avr32 platform data   Nicolas Ferre
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Nicolas Ferre
• [PATCHv2 0/9] macb: add support for Cadence GEM   Nicolas Ferre
• [PATCH 1/1] ARM: mx53_loco: Add GPIO Keypad support   Li Frank-B20596
• [PATCH 1/1 v2] ARM: mx53_loco: Add GPIO Keypad support   Li Frank-B20596
• [PATCH] kbuild: reenable section mismatch analysis   Mike Frysinger
• [PATCH] kbuild: reenable section mismatch analysis   Mike Frysinger
• [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support   G, Manjunath Kondaiah
• [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support   G, Manjunath Kondaiah
• [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support   G, Manjunath Kondaiah
• [PATCH v7 0/1] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v7 1/1] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v8 0/1] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v8 1/1] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v9 0/1] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v9 1/1] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v10 0/1] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v10 1/1] PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v11 0/1] Add PRUSS UIO driver support   Pratheesh Gangadhar
• [PATCH v11 1/1] PRUSS UIO driver support   Pratheesh Gangadhar
• [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Jeff Garzik
• [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Jeff Garzik
• [PATCH v2 02/13] da850: pruss platform specific additions.   Subhasish Ghosh
• [PATCH v2 13/13] tty: pruss SUART driver   Subhasish Ghosh
• [PATCH v1 1/1] davinci: macro rename DA8XX_LPSC0_DMAX to DA8XX_LPSC0_PRUSS.   Subhasish Ghosh
• [PATCH v3 0/7] pruss mfd drivers   Subhasish Ghosh
• [PATCH v3 1/7] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v3 2/7] da850: pruss platform specific additions.   Subhasish Ghosh
• [PATCH v3 3/7] da850: pruss board specific additions.   Subhasish Ghosh
• [PATCH v3 4/7] mfd: pruss SUART private data.   Subhasish Ghosh
• [PATCH v3 5/7] da850: pruss SUART board specific additions.   Subhasish Ghosh
• [PATCH v3 6/7] da850: pruss SUART platform specific additions.   Subhasish Ghosh
• [PATCH v3 7/7] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v3 3/7] da850: pruss board specific additions.   Subhasish Ghosh
• [PATCH v3 7/7] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v3 7/7] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v2 09/13] can: pruss CAN driver.   Subhasish Ghosh
• [patch 1/2] mc13892: reboot on wdi event   Liam Girdwood
• [PATCH v2 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi.   Liam Girdwood
• [PATCH RFC] arm: mini2440: Fix uda134x codec problem.   Liam Girdwood
• [RFC PATCH] ARM: Use generic BUG() handler   Simon Glass
• [RFC PATCH V2] ARM: Use generic BUG() handler   Simon Glass
• [RFC PATCH V2] ARM: Use generic BUG() handler   Simon Glass
• [PATCH] ARM: Use generic BUG() handler   Simon Glass
• Questions about this patch: [PATCH] ARM: Use generic BUG() handler   Simon Glass
• [PATCH v6 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH v6 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH 3/8] Add a mfd IPUv3 driver   Thomas Gleixner
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH 3/8] Add a mfd IPUv3 driver   Thomas Gleixner
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH v6 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH v7 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH v7 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH v8 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Thomas Gleixner
• [PATCH v8 1/1] PRUSS UIO driver support   Thomas Gleixner
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Thomas Gleixner
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Thomas Gleixner
• [PATCH v9 1/1] PRUSS UIO driver support   Thomas Gleixner
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Thomas Gleixner
• [PATCH v9 1/1] PRUSS UIO driver support   Thomas Gleixner
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Thomas Gleixner
• [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers   Thomas Gleixner
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Thomas Gleixner
• [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers   Thomas Gleixner
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Thomas Gleixner
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Thomas Gleixner
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   Thomas Gleixner
• [PM8921 MFD V3 2/6] mfd: pm8xxx: Add irq support   Thomas Gleixner
• [PATCH] MX1: Add structure, registration functions for framebuffer and rename LCDC INT   Gwenhael Goavec-Merou
• [PATCH] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Gwenhael Goavec-Merou
• [PATCH v2] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Gwenhael Goavec-Merou
• [PATCH V2 2/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S3C6410   Banajit Goswami
• [PATCH V2 3/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6440   Banajit Goswami
• [PATCH V2 4/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6450   Banajit Goswami
• [PATCH V2 5/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PC100   Banajit Goswami
• [PATCH V2 6/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PV210   Banajit Goswami
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Govindraj
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Govindraj
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Govindraj
• [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver   Govindraj
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Govindraj
• [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver   Govindraj
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Govindraj
• [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver   Govindraj
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Govindraj.R
• [PATCH] can : AM3517EVM : add platform specific init   Wolfgang Grandegger
• [PATCH 0/4] OMAP 3 and 4 i2c fixes   Andy Green
• [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access   Andy Green
• [PATCH 2/4] OMAP3 I2C document why cpu type and not peripheral unit ID used to probe   Andy Green
• [PATCH 3/4] OMAP3 and 4 i2c mark extended reg enums as extended only   Andy Green
• [PATCH 4/4] OMAP3 and 4 I2C use cpu type consistently for new register availability   Andy Green
• [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access   Andy Green
• [PATCH 2/4] OMAP3 I2C document why cpu type and not peripheral unit ID used to probe   Andy Green
• [PATCH 3/4] OMAP3 and 4 i2c mark extended reg enums as extended only   Andy Green
• [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access   Andy Green
• [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver   Andy Green
• [PATCH 2 01/18] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c   Andy Green
• [PATCH 2 02/18] I2C: OMAP2+: Name registers in I2C IP V2 only accordingly   Andy Green
• [PATCH 2 03/18] I2C: OMAP2+: Introduce I2C IP versioning constants   Andy Green
• [PATCH 2 04/18] I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision   Andy Green
• [PATCH 2 05/18] I2C: OMAP: add rev to omap i2c platform data   Andy Green
• [PATCH 2 06/18] I2C: OMAP1: set IP revision in platform data   Andy Green
• [PATCH 2 07/18] I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus added   Andy Green
• [PATCH 2 08/18] I2C: OMAP2+: use platform_data ip revision to select register map   Andy Green
• [PATCH 2 09/18] I2C: OMAP2+: Solve array bounds overflow error on i2c idle   Andy Green
• [PATCH 2 10/18] I2C: OMAP2+: address confused probed version naming   Andy Green
• [PATCH 2 11/18] I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32   Andy Green
• [PATCH 2 12/18] I2C: OMAP1/OMAP2+: add flags field to omap i2c platform data   Andy Green
• [PATCH 2 13/18] I2C: OMAP2+: Pass flags up to omap i2c platform_data as well   Andy Green
• [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test   Andy Green
• [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr   Andy Green
• [PATCH] OMAP2+: hwmod data: add correct functionality flags to all omap2plus i2c dev_attr   Andy Green
• [PATCH 2 16/18] I2C: OMAP1: set i2c unit feature implementation flags in platform data   Andy Green
• [PATCH 2 17/18] I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from platform data   Andy Green
• [PATCH 2 18/18] I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_info   Andy Green
• [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr   Andy Green
• [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test   Andy Green
• [RFC PATCH 0/5] OMAP2+ / Panda implementation for async platform_data   Andy Green
• [RFC PATCH 1/5] OMAP2+: Panda introduce async platform data definition   Andy Green
• [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper   Andy Green
• [RFC PATCH 3/5] OMAP2+:Common CPU DIE ID reading code reads wrong registers for OMAP4430   Andy Green
• [RFC PATCH 4/5] OMAP2+: Set onboard Ethernet MAC address using unique CPU ID data   Andy Green
• [RFC PATCH 5/5] USBNET: SMSC95XX: if mac set in platform data no need for random one   Andy Green
• [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver   Andy Green
• [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver   Andy Green
• [PATCH 3 01/18] OMAP2+: hwmod data: Set hwmod flags to only allow 16-bit accesses to i2c   Andy Green
• [PATCH 3 02/18] I2C: OMAP2+: Name registers in I2C IP V2 only accordingly   Andy Green
• [PATCH 3 03/18] I2C: OMAP2+: Introduce I2C IP versioning constants   Andy Green
• [PATCH 3 04/18] I2C: OMAP2+: hwmod data: Tag all OMAP2+ hwmod definitions with I2C IP revision   Andy Green
• [PATCH 3 05/18] I2C: OMAP: add rev to omap i2c platform data   Andy Green
• [PATCH 3 06/18] I2C: OMAP1: set IP revision in platform data   Andy Green
• [PATCH 3 07/18] I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus added   Andy Green
• [PATCH 3 08/18] I2C: OMAP2+: use platform_data ip revision to select register map   Andy Green
• [PATCH 3 09/18] I2C: OMAP2+: Solve array bounds overflow error on i2c idle   Andy Green
• [PATCH 3 10/18] I2C: OMAP2+: address confused probed version naming   Andy Green
• [PATCH 3 11/18] I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32   Andy Green
• [PATCH 3 12/18] I2C: OMAP1/OMAP2+: add flags field to omap i2c platform data   Andy Green
• [PATCH 3 13/18] I2C: OMAP2+: Pass flags up to omap i2c platform_data as well   Andy Green
• [PATCH 3 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test   Andy Green
• [PATCH 3 15/18] OMAP2+: hwmod data: add correct functionality flags to all omap2plus i2c dev_attr   Andy Green
• [PATCH 3 16/18] I2C: OMAP1: set i2c unit feature implementation flags in platform data   Andy Green
• [PATCH 3 17/18] I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from platform data   Andy Green
• [PATCH 3 18/18] I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_info   Andy Green
• [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver   Andy Green
• [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper   Andy Green
• [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper   Andy Green
• [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper   Andy Green
• [PATCH V2 0/3]: OMAP4: Update OPP Table and Voltage Rail Values   Shweta Gulati
• [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP   Shweta Gulati
• [PATCH V2 2/3] OMAP4: Update Voltage Rail Values for MPU/IVA   Shweta Gulati
• [PATCH V2 3/3] OMAP4: Add IVA OPP enteries.   Shweta Gulati
• [PATCH V3 2/3] OMAP4: Update Voltage Rail Values for MPU, IVA and CORE   Shweta Gulati
• [PATCH] OMAP4: Intialize IVA Device in addition to DSP device.   Shweta Gulati
• [PATCH] OMAP4: Intialize IVA Device in addition to DSP device.   Gulati, Shweta
• [PATCH V2] OMAP4: Intialize IVA Device in addition to DSP device.   Shweta Gulati
• [PATCH] arm: mxs: add irq_chip-name for GPIO IRQs   Shawn Guo
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Shawn Guo
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Shawn Guo
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Shawn Guo
• [PATCH v2] ARM: mxs/mx28evk: add flexcan devices   Shawn Guo
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Shawn Guo
• A few mxsfb patches   Shawn Guo
• [PATCH 1/3] video: mxsfb: smarten the code a little bit   Shawn Guo
• [PATCH 2/3] video: mxsfb: fix the incorrect error checking for alloc_pages_exact   Shawn Guo
• [PATCH 3/3] video: mxsfb: add DOTCLK polarity configuration support   Shawn Guo
• [PATCH] ARM: mxs/tx28: fix up LCD pads   Shawn Guo
• [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards   Shawn Guo
• [PATCH 1/4] ARM: mxs: add helper macro for pad control   Shawn Guo
• [PATCH 2/4] ARM: mxs/mx28evk: add framebuffer device   Shawn Guo
• [PATCH 3/4] ARM: mxs: fix typo "GPO" in iomux-mx23.h   Shawn Guo
• [PATCH 4/4] ARM: mxs/mx23evk: add framebuffer device   Shawn Guo
• [PATCH 1/3] video: mxsfb: smarten the code a little bit   Shawn Guo
• [PATCH 1/3 RESEND] video: mxsfb: smarten the code a little bit   Shawn Guo
• [PATCH 1/3] video: mxsfb: smarten the code a little bit   Shawn Guo
• A few mxsfb patches   Shawn Guo
• [PATCH 2/4] ARM: mxs/mx28evk: add framebuffer deviceg   Shawn Guo
• [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards   Shawn Guo
• [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards   Shawn Guo
• [PATCH 1/2] ARM: mx28: set proper parent for lcdif clock   Shawn Guo
• [PATCH 2/2] ARM: mxs/mx28evk: add framebuffer device   Shawn Guo
• [PATCH] net/fec: check id_entry pointer before using it   Shawn Guo
• [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards.   Shawn Guo
• [PATCH] ARM: mx5: fix clk id for a few DEFINE_CLOCK   Shawn Guo
• [PATCH] mmc: change CONFIG of MMC_SDHCI based drivers from 'bool' to 'tristate'   Shawn Guo
• [PATCH] arm/dt: Add dtb make rule   Shawn Guo
• [PATCH] ARM: mxs/tx28: fix up LCD pads   Shawn Guo
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Shawn Guo
• [PATCH] ARM: mxs/tx28: fix up LCD pads   Shawn Guo
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Shawn Guo
• [PATCH] ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes   Shawn Guo
• [PATCH 2/2] ARM: mxs: TX28: Setup MAC addresses for both FEC MACs from OTP fuses.   Shawn Guo
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Gupta, Ramesh
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Gupta, Ramesh
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Gupta, Ramesh
• [PATCH 2/3] ep93xx: add /proc/cpuinfo extension   Martin Guy
• [PATCHv2] omap:mailbox: resolve hang issue   Guzman Lugo, Fernando
• [PATCH 1/7] davinci: move DM64XX_VDD3P3V_PWDN to devices.c   Manjunath Hadli
• [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod   Manjunath Hadli
• [PATCH 3/7] davinci: dm644x: Replace register base value with a defined macro   Manjunath Hadli
• [PATCH 4/7] davinci: dm644x: change vpfe capture structure variables for consistency   Manjunath Hadli
• [PATCH 5/7] davinci: dm644x: move vpfe init from soc to board specific files   Manjunath Hadli
• [PATCH 6/7] davinci: dm644x: add support for v4l2 video display   Manjunath Hadli
• [PATCH 7/7] davinci: dm644x EVM: add support for VPBE display   Manjunath Hadli
• [PATCH 1/7] davinci: move DM64XX_VDD3P3V_PWDN to devices.c   Hadli, Manjunath
• [PATCH v17 00/13] davinci vpbe: dm6446 v4l2 driver   Manjunath Hadli
• [PATCH v15 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Manjunath Hadli
• [PATCH v15 02/13] davinci vpbe: VPBE display driver   Manjunath Hadli
• [PATCH v15 03/13] davinci vpbe: OSD(On Screen Display) block   Manjunath Hadli
• [PATCH v15 04/13] davinci vpbe: VENC( Video Encoder) implementation   Manjunath Hadli
• [PATCH v15 05/13] davinci vpbe: Build infrastructure for VPBE driver   Manjunath Hadli
• [PATCH v15 06/13] davinci vpbe: Readme text for Dm6446 vpbe   Manjunath Hadli
• [PATCH v17 07/13] davinci: move DM64XX_VDD3P3V_PWDN to devices.c   Manjunath Hadli
• [PATCH v17 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod   Manjunath Hadli
• [PATCH v17 09/13] davinci: dm644x: Replace register base value with a defined macro   Manjunath Hadli
• [PATCH v17 10/13] davinci: dm644x: change vpfe capture structure variables for consistency   Manjunath Hadli
• [PATCH v17 11/13] davinci: dm644x: move vpfe init from soc to board specific files   Manjunath Hadli
• [PATCH v17 12/13] davinci: dm644x: add support for v4l2 video display   Manjunath Hadli
• [PATCH v17 13/13] davinci: dm644x EVM: add support for VPBE display   Manjunath Hadli
• [PATCH v17 00/13] davinci vpbe: dm6446 v4l2 driver   Hadli, Manjunath
• [PATCH V12 3/4] ptp: Added a clock driver for the IXP46x.   Krzysztof Halasa
• [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support   MyungJoo Ham
• [PATCH] ARM: EXYNOS4 NURI: Add MAX8997 support (MFD+Regulator+RTC)   MyungJoo Ham
• [PATCH] ARM: EXYNOS4 NURI: Add MAX8997 support (MFD+Regulator+RTC)   MyungJoo Ham
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32   Shiraz Hashim
• [PATCH 3/8] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 3/8] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 3/8] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 3/8] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Sascha Hauer
• [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device   Sascha Hauer
• [PATCH] i.MX some patches   Sascha Hauer
• [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files   Sascha Hauer
• [PATCH 2/4] ARM i.MX: iomux v1 initialization away from initcall   Sascha Hauer
• [PATCH 3/4] ARM i.MX31 lilly: remove incomplete otg support   Sascha Hauer
• [PATCH 4/4] ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceivers   Sascha Hauer
• [PATCH] ARM: imx/mx25_3ds: Fix build failure   Sascha Hauer
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Sascha Hauer
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Sascha Hauer
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Sascha Hauer
• [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files   Sascha Hauer
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Sascha Hauer
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Sascha Hauer
• [patch v2 2/2] efika mx/sb: enable watchdog   Sascha Hauer
• Compiling a kernel for armv5 + armv6   Sascha Hauer
• [PATCH] remove kconfig dependencies from ARCH_MX*/MACH_MX*   Sascha Hauer
• [PATCH 1/6] media/video i.MX: use IMX_HAVE_PLATFORM_* macros   Sascha Hauer
• [PATCH 2/6] rtc i.MX Dryice: use IMX_HAVE_PLATFORM_IMXDI_RTC to depend on   Sascha Hauer
• [PATCH 3/6] usb i.MX21: use IMX_HAVE_PLATFORM_IMX21_HCD to depend on   Sascha Hauer
• [PATCH 4/6] video i.MX: remove mx1 compile time dependencies   Sascha Hauer
• [PATCH 5/6] watchdog i.MX: use IMX_HAVE_PLATFORM_IMX2_WDT to depend on   Sascha Hauer
• [PATCH 6/6] mmc i.MX sdhci: use IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX to depend on   Sascha Hauer
• Compiling a kernel for armv5 + armv6   Sascha Hauer
• [PATCH 4/6] video i.MX: remove mx1 compile time dependencies   Sascha Hauer
• [PATCH] ARM: mx51: Print silicon revision on boot   Sascha Hauer
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Sascha Hauer
• [PATCH] ARM: mx51: Print silicon revision on boot   Sascha Hauer
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Sascha Hauer
• A few mxsfb patches   Sascha Hauer
• [PATCH] ARM: mxs/tx28: fix up LCD pads   Sascha Hauer
• [PATCH 2/4] ARM: mxs/mx28evk: add framebuffer deviceg   Sascha Hauer
• [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards   Sascha Hauer
• [PATCH 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board   Sascha Hauer
• [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards   Sascha Hauer
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Sascha Hauer
• [PATCH] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Sascha Hauer
• i.MX Pull request for -next   Sascha Hauer
• i.MX Pull request for -next   Sascha Hauer
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Sascha Hauer
• [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards.   Sascha Hauer
• [PATCH] ARM: mx5: fix clk id for a few DEFINE_CLOCK   Sascha Hauer
• [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Sascha Hauer
• [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Sascha Hauer
• [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Sascha Hauer
• [PATCHv3 1/3] ARM: mx51: Add entry for gpc_dvfs_clk   Sascha Hauer
• [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI   Sascha Hauer
• [PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51   Sascha Hauer
• [PATCH V1 1/3] ahci_platform: add two clk pointer member into ahci_platform_data struct   Sascha Hauer
• [PATCH V1 2/3] AHCI Add the AHCI SATA feature on MX53 platforms   Sascha Hauer
• [PATCH] mtd/mxc_nand: add support for multiple chips on V21 devices   Sascha Hauer
• [PATCHv5 4/4] ARM: mx51: Add support for low power suspend on MX51   Sascha Hauer
• [PATCH v3 0/2] msm: add single-wire serial bus interface (SSBI) driver   Kenneth Heitke
• [PATCH v3 1/2] MAINTAINERS: Add drivers/platform/msm to MSM subsystem   Kenneth Heitke
• [PATCH v3 2/2] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   Kenneth Heitke
• [PATCH] msm: Add SSBI support for MSM8960   Kenneth Heitke
• [PATCH v3 1/2] MAINTAINERS: Add drivers/platform/msm to MSM subsystem   Kenneth Heitke
• [PATCH] ARM: enable CONFIG_KTIME_SCALAR   Rob Herring
• [PATCH] ARM: fix compile error in tlb.h   Rob Herring
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers   Rob Herring
• [PATCH v3 0/7] ARM timer clock api support   Rob Herring
• [PATCH v3 1/7] ARM: integrator cp: add sp804 clock   Rob Herring
• [PATCH v3 2/7] ARM: realview: add sp804 clock   Rob Herring
• [PATCH v3 3/7] ARM: versatile: add sp804 clock   Rob Herring
• [PATCH v3 4/7] ARM: vexpress: add sp804 clock   Rob Herring
• [PATCH v3 5/7] ARM: timer-sp: support timer clock freq other than 1MHz   Rob Herring
• [PATCH v3 6/7] ARM: smp_twd: add clock api support   Rob Herring
• [PATCH v3 7/7] ARM: vexpress: add smp_twd clock   Rob Herring
• [PATCH] arm/dt: Add dtb make rule   Rob Herring
• [PATCH v3 0/7] ARM timer clock api support   Rob Herring
• [PATCH] arm/dt: Add dtb make rule   Rob Herring
• [PATCH v3 6/7] ARM: smp_twd: add clock api support   Rob Herring
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Kevin Hilman
• [PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE   Kevin Hilman
• [GIT PULL] omap fixes for v2.6.38-rc6   Kevin Hilman
• [GIT PULL] OMAP PM fixes for 2.6.38-rc   Kevin Hilman
• [GIT PULL] OMAP PM fixes for 2.6.38-rc   Kevin Hilman
• [PATCH 01/17] omap4: pm: Add omap WakeupGen module support   Kevin Hilman
• [PATCH 02/17] omap4: pm: Add SAR RAM support   Kevin Hilman
• [PATCH 03/17] omap4: Export scu base address   Kevin Hilman
• [PATCH 04/17] omap4: pm: Add CPUx OFF mode support   Kevin Hilman
• [PATCH 05/17] omap4: pm: Initialise all the clockdomains to supported states   Kevin Hilman
• [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes   Kevin Hilman
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Kevin Hilman
• [PATCH 09/17] omap4: pm: Add WakeupGen save/restore support   Kevin Hilman
• [PATCH 10/17] omap4: pm: Add L2 cache lowpower support   Kevin Hilman
• [PATCH 11/17] omap4: suspend: Add MPUSS RET and OFF support   Kevin Hilman
• [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters   Kevin Hilman
• [PATCH 13/17] omap4: cpuidle: Basic CPUidle support   Kevin Hilman
• [PATCH 14/17] omap4: cpuidle: Add MPUSS RET OFF states   Kevin Hilman
• [PATCH 16/17] omap4: cpuidle: Allow debugfs control through enable_off_mode   Kevin Hilman
• [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes   Kevin Hilman
• [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support   Kevin Hilman
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL   Kevin Hilman
• [PATCH] perf: add OMAP support for the new power events   Kevin Hilman
• [PATCH 0/6] omap3: pm: Fixes for low power code   Kevin Hilman
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Kevin Hilman
• [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters   Kevin Hilman
• [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support   Kevin Hilman
• [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on   Kevin Hilman
• [PATCH] omap3: cpuidle: Add description field to each C-state.   Kevin Hilman
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Kevin Hilman
• [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on   Kevin Hilman
• [PATCH] i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup   Kevin Hilman
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Kevin Hilman
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Kevin Hilman
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Kevin Hilman
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Kevin Hilman
• [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support   Kevin Hilman
• [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on   Kevin Hilman
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Kevin Hilman
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Kevin Hilman
• [PATCH v3] OMAP3+: OPP: Replace voltage values with Macros   Kevin Hilman
• [PATCH V2 0/3]: OMAP4: Update OPP Table and Voltage Rail Values   Kevin Hilman
• [PATCH 1/2] OMAP PM: create a PM layer plugin for the devices wakeup latency constraints   Kevin Hilman
• [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs   Kevin Hilman
• [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs   Kevin Hilman
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Kevin Hilman
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Kevin Hilman
• [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Kevin Hilman
• [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH] omap2plus: smartreflex: remove sr debug directory in omap_sr_remove()   Kevin Hilman
• [PATCH] perf: add OMAP support for the new power events   Kevin Hilman
• [PATCH 2/2] OMAP: PM: implement devices constraints APIs   Kevin Hilman
• [PATCH] perf: add OMAP support for the new power events   Kevin Hilman
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Kevin Hilman
• [PATCH 2/2] OMAP: PM: implement devices constraints APIs   Kevin Hilman
• [PATCH v2 0/5] OMAP3: PM: Fixes for low power code   Kevin Hilman
• [PATCH] OMAP2+: voltage: don't build voltage layer when !CONFIG_PM   Kevin Hilman
• [GIT PULL] OMAP PM updates for 2.6.39   Kevin Hilman
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Kevin Hilman
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Kevin Hilman
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Kevin Hilman
• [GIT PULL] OMAP PM updates for 2.6.39   Kevin Hilman
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Kevin Hilman
• [GIT PULL] another set of OMAP PM updates for 2.6.39   Kevin Hilman
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Kevin Hilman
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Kevin Hilman
• [PATCH] DM644x EVM: register MUSB device earlier   Kevin Hilman
• [GIT PULL] davinci platform updates for 2.6.39   Kevin Hilman
• [GIT PULL] final davinci updates for 2.6.39   Kevin Hilman
• [PATCH V2] OMAP4: Intialize IVA Device in addition to DSP device.   Kevin Hilman
• [PATCH V3 01/19] OMAP3: hwmod: add SmartReflex IRQs   Kevin Hilman
• [PATCH V3 02/19] OMAP3+: voltage: fix build warning   Kevin Hilman
• [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage   Kevin Hilman
• [PATCH V3 04/19] OMAP3+: voltage: remove spurious pr_notice for debugfs   Kevin Hilman
• [PATCH V3 06/19] OMAP3+: voltage: use volt_data pointer instead values   Kevin Hilman
• [PATCH V3 07/19] OMAP3+: voltage: add transdone APIs   Kevin Hilman
• [PATCH V3 08/19] OMAP3+: SR: make notify independent of class   Kevin Hilman
• [PATCH V3 09/19] OMAP3+: SR: disable interrupt by default   Kevin Hilman
• [PATCH V3 10/19] OMAP3+: SR: enable/disable SR only on need   Kevin Hilman
• [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation   Kevin Hilman
• [PATCH V3 12/19] OMAP3+: SR: introduce class start, stop and priv data   Kevin Hilman
• [PATCH V3 13/19] OMAP3+: SR: Reuse sr_[start|stop]_vddautocomp functions   Kevin Hilman
• [PATCH V3 14/19] OMAP3+: SR: introduce notifiers flags   Kevin Hilman
• [PATCH V3 15/19] OMAP3+: SR: introduce notifier_control   Kevin Hilman
• [PATCH V3 17/19] OMAP3+: SR: make enable path use volt_data pointer   Kevin Hilman
• [PATCH V3 18/19] OMAP3630+: SR: add support for class 1.5   Kevin Hilman
• [PATCH V3 19/19] OMAP3430: SR: class3: restrict CPU to run on   Kevin Hilman
• [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation   Kevin Hilman
• [PATCH v2 3/7] OMAP: PM CONSTRAINTS: implement wake-up latency constraints   Kevin Hilman
• [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code   Kevin Hilman
• [PATCH v2 5/7] OMAP: PM CONSTRAINTS: add a power domains state update function in hwmod   Kevin Hilman
• [PATCH v2 6/7] OMAP: PM CONSTRAINTS: control power domains next state   Kevin Hilman
• [PATCH v2 7/7] OMAP: PM CONSTRAINTS: add power domains wake-up latency figures   Kevin Hilman
• [PATCH] OMAP4: PM: remove redundant #ifdef CONFIG_PM   Kevin Hilman
• [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code   Kevin Hilman
• [PATCH 3/4] [ARM] msm_fb: Fix framebuffer console   Arve Hjønnevåg
• [PATCH 0/4] [rfc v3] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• [PATCH 1/4] mmc: tmio_mmc: Move some defines into a shared header   Simon Horman
• [PATCH 2/4] mmc, ARM: Rename SuperH Mobile ARM zboot helpers   Simon Horman
• [PATCH 3/4] mmc: Add MMC_PROGRESS_*   Simon Horman
• [PATCH 4/4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• [PATCH 4/4 v5] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• reboot/kexec in 2.6.38   Cyril Hrubis
• reboot/kexec in 2.6.38   Cyril Hrubis
• Amba CLCD register definitions   Michael Hunold
• Amba CLCD register definitions   Michael Hunold
• [PATCH 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile   Bryan Huntsman
• [PATCH v4 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Bryan Huntsman
• [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver   Bryan Huntsman
• [PATCH 08/20] video: msm: Refactor mdp_regs   Bryan Huntsman
• [PATCH 0/5] Fix build failures with binutils 2.21   Ben Hutchings
• [PATCH 5/5] arm: Fix .size directives for __arm{7,9}tdmi_proc_info   Ben Hutchings
• [PATCH] arm: Fix .size directive for xscale_dma_a0_map_area   Ben Hutchings
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Jamie Iles
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Jamie Iles
• [PATCHv6 0/5] ARM: add initial support for Picochip picoXcell SoC   Jamie Iles
• [PATCHv6 1/5] picoxcell: support for Picochip picoXcell SoC   Jamie Iles
• [PATCHv6 2/5] picoxcell: support for the common system timers   Jamie Iles
• [PATCHv6 3/5] picoxcell: common SoC peripheral support   Jamie Iles
• [PATCHv6 4/5] picoxcell: basic clk infrastructure   Jamie Iles
• [PATCHv6 5/5] picoxcell: support for the PC7302 development board   Jamie Iles
• [PATCHv3 3/9] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCH 2/2] macb: remove conditional clk handling   Jamie Iles
• [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT   Jamie Iles
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Jamie Iles
• [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT   Jamie Iles
• [PATCH 0/8] macb: add support for Cadence GEM   Jamie Iles
• [PATCH 1/8] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCH 2/8] macb: detect hclk presence from platform data   Jamie Iles
• [PATCH 3/8] macb: convert printk to pr_ and friends   Jamie Iles
• [PATCH 4/8] macb: initial support for Cadence GEM   Jamie Iles
• [PATCH 5/8] macb: handle HW address registers for GEM devices   Jamie Iles
• [PATCH 6/8] macb: support higher rate GEM MDIO clock divisors   Jamie Iles
• [PATCH 7/8] macb: support statistics for GEM devices   Jamie Iles
• [PATCH 8/8] macb: support data bus widths > 32 bits   Jamie Iles
• [PATCH 1/2] at91: provide pclk and hclk for macb ethernet devices   Jamie Iles
• [PATCH 2/8] macb: detect hclk presence from platform data   Jamie Iles
• [PATCH 2/8] macb: detect hclk presence from platform data   Jamie Iles
• [PATCH 1/8] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCH 3/8] macb: convert printk to pr_ and friends   Jamie Iles
• [PATCH 2/8] macb: detect hclk presence from platform data   Jamie Iles
• [PATCH 1/8] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCH 2/8] macb: detect hclk presence from platform data   Jamie Iles
• [PATCH 8/8] macb: support data bus widths > 32 bits   Jamie Iles
• [PATCH 1/8] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCH 4/8] macb: initial support for Cadence GEM   Jamie Iles
• [PATCH 1/8] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCH 4/8] macb: initial support for Cadence GEM   Jamie Iles
• [PATCH] macb: detect IP version to determin if we are on at91 or avr32   Jamie Iles
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jamie Iles
• [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name   Jamie Iles
• [PATCHv2 2/9] macb: remove conditional clk handling   Jamie Iles
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCHv2 4/9] macb: convert printk to netdev_ and friends   Jamie Iles
• [PATCHv2 5/9] macb: initial support for Cadence GEM   Jamie Iles
• [PATCHv2 6/9] macb: support higher rate GEM MDIO clock divisors   Jamie Iles
• [PATCHv2 7/9] macb: support statistics for GEM devices   Jamie Iles
• [PATCHv2 8/9] macb: support DMA bus widths > 32 bits   Jamie Iles
• [PATCHv2 9/9] macb: allow GEM to have configurable receive buffer size   Jamie Iles
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name   Jamie Iles
• [PATCH v2 1/1] Add core support for QQ2440.   Jamie Iles
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name   Jamie Iles
• [PATCH 1/9] lpc2k: Core support   Jamie Iles
• [PATCH 4/9] lpc2k: generic time and clockevents   Jamie Iles
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Jamie Iles
• [PATCHv6 0/5] ARM: add initial support for Picochip picoXcell SoC   Jamie Iles
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Jamie Iles
• Build warning in todays linus/master   Jamie Iles
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jamie Iles
• Build warning in todays linus/master   Jamie Iles
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jamie Iles
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jamie Iles
• [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency   Jamie Iles
• [Q] Booting kernel from NFS?   Baurzhan Ismagulov
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   David Jander
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   David Jander
• [PATCH 01/20] video: msm: Fix typo 'mpd'->'mdp'   Janorkar, Mayuresh
• [PATCH 07/20] video: msm: Allow users to request a larger x and y virtual fb   Janorkar, Mayuresh
• [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code.   Janorkar, Mayuresh
• [PATCH 08/20] video: msm: Refactor mdp_regs   Janorkar, Mayuresh
• [PATCH 11/20] video: msm: Add MDP FB DMA configuration   Janorkar, Mayuresh
• [PATCH 13/20] video: msm: Debugging for send_blit   Janorkar, Mayuresh
• [PATCH 15/20] video: msm: convert printk to pr_*   Janorkar, Mayuresh
• Recall: [PATCH 1/2] ARM imx53: add pwm devices support   Chen Jie-B02280
• Recall: [PATCH 1/2] ARM imx53: add pwm devices support   Chen Jie-B02280
• [PATCH 2/2] Add a default config for PAZ00   Olof Johansson
• [PATCH 0/3] Tegra i2c board changes + defconfig update   Olof Johansson
• [PATCH 1/3] ARM: tegra: seaboard: register i2c devices   Olof Johansson
• [PATCH 2/3] ARM: tegra: harmony: register i2c devices   Olof Johansson
• [PATCH 3/3] ARM: tegra: enable new drivers in defconfig   Olof Johansson
• [PATCH 0/3] ARM: Tegra: Enable audio (boards-for-next)   Olof Johansson
• [PATCH 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook   Olof Johansson
• [PATCH 3/3] ARM: tegra: enable new drivers in defconfig   Olof Johansson
• [PATCH 1/3] ARM: tegra: seaboard: register i2c devices   Olof Johansson
• [PATCH 0/3] Tegra i2c board changes + defconfig update   Olof Johansson
• [PATCH 1/3] ARM: tegra: seaboard: register i2c devices   Olof Johansson
• [PATCH v2 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook   Olof Johansson
• [PATCH v2] ARM: tegra: seaboard: register i2c devices   Olof Johansson
• [PATCH v2] ARM: tegra: seaboard: register i2c devices   Olof Johansson
• [PATCH 0/3] Harmony PCI-e and regulators   Olof Johansson
• [RFC][PATCH v2 00/23] __vmalloc: Propagating GFP allocation flag inside __vmalloc().   Prasad Joshi
• [RFC][PATCH v2 02/23] (armho) __vmalloc: add gfp flags variant of pte and pmd allocation   Prasad Joshi
• [RFC][PATCH v2 23/23] __vmalloc: add gfp flags variant of pte, pmd, and pud allocation   Prasad Joshi
• [RFC][PATCH v3 21/22] mm, arm: add gfp flags variant of pmd and pte allocations   Prasad Joshi
• [PATCH][Trivial] ARM: Remove duplicate linux/sched.h include from arch/arm/plat-iop/time.c   Jesper Juhl
• [PATCH] ARM: Remove bouncing author email from arch/arm/plat-iop/time.c   Jesper Juhl
• [PATCH 0/3] ARM: OMAP2+: gpmc warning fixes   Balaji T K
• [PATCH 1/3] ARM: OMAP2+: correct GPMC IRQ   Balaji T K
• [PATCH 2/3] ARM: OMAP2+: GPMC set dummy irq chip   Balaji T K
• [PATCH 3/3] ARM: OMAP4: correct GPMC IRQ number   Balaji T K
• [RFC] device.h: add device_set_platdata routine   Greg KH
• [PATCH v10 1/1] PRUSS UIO driver support   Greg KH
• [PATCH v11 1/1] PRUSS UIO driver support   Greg KH
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Greg KH
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Greg KH
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Greg KH
• [RFC PATCH 1/5] OMAP2+: Panda introduce async platform data definition   Greg KH
• [Security] [PATCH 00/20] world-writable files in sysfs and debugfs   Greg KH
• [Security] [PATCH 00/20] world-writable files in sysfs and debugfs   Greg KH
• [PATCH 2/4] msm: scm: Fix improper register assignment   Saravana Kannan
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Saravana Kannan
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums   Saravana Kannan
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Saravana Kannan
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Saravana Kannan
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Saravana Kannan
• [PATCHv4 0/4] ARM: Fixing udelay() for SMP and non-SMP systems   Saravana Kannan
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Saravana Kannan
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Saravana Kannan
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Saravana Kannan
• [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver   Saravana Kannan
• [PATCH 0/2] Common struct clk implementation, v14   Jeremy Kerr
• [PATCH 1/2] Add a common struct clk   Jeremy Kerr
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [PATCH 0/2] Common struct clk implementation, v14   Jeremy Kerr
• [PATCH 0/2] Common struct clk implementation, v14   Jeremy Kerr
• PXA270 Random Hangs at Low Core Freq   Vasily Khoruzhick
• PXA270 Random Hangs at Low Core Freq   Vasily Khoruzhick
• [PATCH v2 1/3] ARM: PXA: PXAFB: Fix double-free issue   Vasily Khoruzhick
• [PATCH 2/2] ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation   Vasily Khoruzhick
• [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management   Vasily Khoruzhick
• [PATCH 2/4] ARM: PXA: PXAFB: Fix plane Z-ordering problem   Vasily Khoruzhick
• [PATCH 3/4] ARM: PXA: PXAFB: Fix typo in ypos assignment   Vasily Khoruzhick
• [PATCH 4/4] ARM: PXA: PXAFB: don't disable controller on cpufreq transition if overlay is in use   Vasily Khoruzhick
• [PATCH] z2-battery: Fix count of properties   Vasily Khoruzhick
• [PATCH 1/8] ARM: PXA: Z2: Use only power button as wake source   Vasily Khoruzhick
• [PATCH 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Vasily Khoruzhick
• [PATCH 3/8] ARM: PXA: Z2: Fix battery pdata   Vasily Khoruzhick
• [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo   Vasily Khoruzhick
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH 6/8] ARM: PXA: Z2: Fix libertas init/tear down sequences   Vasily Khoruzhick
• [PATCH 7/8] ARM: PXA: Z2: Keep kbd backlight disabled by default   Vasily Khoruzhick
• [PATCH 8/8] ARM: PXA: Z2: Add default triggers for LEDs   Vasily Khoruzhick
• [PATCH v2] z2-battery: Fix count of properties   Vasily Khoruzhick
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Vasily Khoruzhick
• [PATCH 6/8] ARM: PXA: Z2: Fix libertas init/tear down sequences   Vasily Khoruzhick
• [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management   Vasily Khoruzhick
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Vasily Khoruzhick
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Vasily Khoruzhick
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo   Vasily Khoruzhick
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Vasily Khoruzhick
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Vasily Khoruzhick
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH 1/2] i2c-pxa2xx: Fix register offsets   Vasily Khoruzhick
• [PATCH 2/2] i2c-pxa2xx: Don't clear isr bits too early   Vasily Khoruzhick
• [PATCH v2 0/6] ARM: PXA: Z2: Zipit Z2 improvements series   Vasily Khoruzhick
• [PATCH v2 1/6] ARM: PXA: Z2: Use only power button as wake source   Vasily Khoruzhick
• [PATCH v2 2/6] ARM: PXA: Z2: Fix battery pdata   Vasily Khoruzhick
• [PATCH v2 3/6] ARM: PXA: Z2: Fix libertas init/tear down sequences   Vasily Khoruzhick
• [PATCH v2 4/6] ARM: PXA: Z2: Keep kbd backlight disabled by default   Vasily Khoruzhick
• [PATCH v2 5/6] ARM: PXA: Z2: Add default triggers for LEDs   Vasily Khoruzhick
• [PATCH v2 6/6] ARM: PXA: Z2: Use switch event for lid   Vasily Khoruzhick
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Vasily Khoruzhick
• [PATCH] pxa2xx_spi: Fix race condition in stop_queue()   Vasily Khoruzhick
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH v2] ARM: PXA: Z2: Add poweroff function   Vasily Khoruzhick
• [PATCH] ARM: S3C24XX: H1940: RX1950: Change default LED triggers   Vasily Khoruzhick
• [PATCH] ARM: pxafb: Fix access to nonexistent member of pxafb_info   Vasily Khoruzhick
• [PATCH] ARM: pxafb: Fix access to nonexistent member of pxafb_info   Vasily Khoruzhick
• [PATCH] S3C64XX: Fix keypad setup to configure correct number of rows   Kukjin Kim
• [PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT   Kukjin Kim
• [PATCH v2] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board   Kukjin Kim
• [PATCH 1/3] ARM: S5P: Rename MIPI-CSIS header and update Copyright   Kukjin Kim
• [PATCH/RFC 0/3] ARM: S5P: Add common DPHY control code for MIPI-CSIS/MIPI-DSIM devices   Kukjin Kim
• [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Kukjin Kim
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration   Kukjin Kim
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration   Kukjin Kim
• [PATCH 0/7] Various Samsung updates   Kukjin Kim
• [PATCH 7/7] ARM: SMDK6410: Update regulator names for debugfs compatiblity   Kukjin Kim
• [PATCH v3] ARM: EXYNOS4: add support for i2c PMICs on Universal_C210 board   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Adds Samsung NURI board support   Kukjin Kim
• [PATCH V2 2/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S3C6410   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Add ARMLEX4210 Board support file   Kukjin Kim
• [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Kukjin Kim
• [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it   Kukjin Kim
• [PATCH] Exynos4: Remove meaningless REGULATOR config option   Kukjin Kim
• [PATCH] Exynos4: Remove meaningless REGULATOR config option   Kukjin Kim
• [PATCH v2] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.38-rc8   Kukjin Kim
• [PATCH v3] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Kukjin Kim
• [PATCH/RFC 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update   Kukjin Kim
• [PATCH 1/3] This patch adds support HR-Timer(High Resolution Timer) and dynamic tick system for S5P SoCs. There are many clock sources for HR-Timer on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used for clock source. This patch can onl   Kukjin Kim
• [PATCH v2 0/3] ARM: S5P: Add D-PHY control platform helpers for MIPI-CSIS/DSIM drivers   Kukjin Kim
• [PATCH v2 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control   Kukjin Kim
• [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support   Kukjin Kim
• [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support   Kukjin Kim
• [PATCH V2 0/3] ARM: EXYNOS4: Suspend to RAM Support   Kukjin Kim
• [PATCH V2 1/3] ARM: EXYNOS4: Add PMU and CMU Registers for PM   Kukjin Kim
• [PATCH V2 2/3] ARM: EXYNOS4: Suspend to RAM Support   Kukjin Kim
• [PATCH V2 3/3] ARM: EXYNOS4: Update HRT for supporting PM   Kukjin Kim
• [PATCH v2] ARM: S5P: Add platform helpers for camera GPIO configuration   Kukjin Kim
• [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT   Kukjin Kim
• [PATCH v3 1/3] ARM: S5P: Rename MIPI-CSIS driver header and update Copyright   Kukjin Kim
• [PATCH v3 2/3] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback   Kukjin Kim
• [PATCH v3 0/3] ARM: S5P: Add platform helpers for MIPI-CSIS/DSIM DPHY   Kukjin Kim
• [PATCH] Exynos4: Add HSMMC channel 4 support   Kukjin Kim
• [PATCH] Exynos4: Add HSMMC channel 4 support   Kukjin Kim
• [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init   Kukjin Kim
• [PATCH v4 0/3] ARM: S5P: Add HRT support for s5p series   Kukjin Kim
• [PATCH 1/7] ARM: S5PV310: Add platform definitions for FIMC   Kukjin Kim
• [PATCH 0/5] S5PC210/S5PV310/EXYNOS4 interrupts update   Kukjin Kim
• [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init   Kukjin Kim
• [PATCH v2 0/4] S5PC210/S5PV310/EXYNOS4 interrupts update   Kukjin Kim
• [PATCH v2] ARM: EXYNOS4: add a placeholder for board specific interrupts   Kukjin Kim
• [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU   Kukjin Kim
• [PATCH] ARM: EXYNOS4: CPUIDLE Support   Kukjin Kim
• [GIT PULL] Samsung S5P for 2.6.39 merge window   Kukjin Kim
• [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU   Kukjin Kim
• [PATCH] ARM: EXYNOS4: CPUIDLE Support   Kukjin Kim
• [PATCH 1/2] s5pc110: add clock gate for MIPI-DSI controller.   Kukjin Kim
• [PATCH 2/2] s5pc110: add MIPI-DSI controller driver.   Kukjin Kim
• [PATCH] ARM: EXYNOS4 NURI: Add MAX8997 support (MFD+Regulator+RTC)   Kukjin Kim
• [PATCH V2 0/3] ARM: S5P: Add HRT support for s5p series   Sangbeom Kim
• [PATCH V2 1/3] ARM: S5P: Add s5p_timer support for HRT   Sangbeom Kim
• [PATCH V2 2/3] ARM: S5P: Update machine initialization for HRT   Sangbeom Kim
• [PATCH V2 3/3] ARM: S5P: Update defconfig for HRT support   Sangbeom Kim
• [PATCH V2 1/3] ARM: S5P: Add s5p_timer support for HRT   Sangbeom Kim
• [PATCH V3 0/3] ARM: S5P: Add HRT support for s5p series   Sangbeom Kim
• [PATCH 1/3] This patch adds support HR-Timer(High Resolution Timer) and dynamic tick system for S5P SoCs. There are many clock sources for HR-Timer on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used for clock source. This patch can only support PWM timer for clocksource of S5P64x0 and S5PV210.   Sangbeom Kim
• [PATCH 2/3] This patch modify s5pv210_defconfig and s5p64x0_defconfig for High resolution timer support.   Sangbeom Kim
• [PATCH 3/3] This patch update mach-s5p64x0 and mach-s5pv210 machine initialization for hrt support. S5P_HRT is added and applied in s5pv210, s5p64x0 machines. PWM Timer3 is used for default clockevent. PWM Timer4 is used for defualt clocksource.   Sangbeom Kim
• [PATCH v4 0/3] ARM: S5P: Add HRT support for s5p series   Sangbeom Kim
• [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT   Sangbeom Kim
• [PATCH v4 2/3] ARM: S5P: Update machine initialization for HRT   Sangbeom Kim
• [PATCH v4 3/3] ARM: S5P: Update defconfig for HRT support   Sangbeom Kim
• [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT   Sangbeom Kim
• [PATCHv2 0/4] Continue the mx31_3ds machine support   Marc Kleine-Budde
• [PATCHv2 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board   Marc Kleine-Budde
• [PATCHv2 3/4] mach-mx31_3ds: Add support for framebuffer and LCD   Marc Kleine-Budde
• [PATCH v3 1/7] mfd: add pruss mfd driver.   Marc Kleine-Budde
• [PATCH v3 3/7] da850: pruss board specific additions.   Marc Kleine-Budde
• [RFC] device.h: add device_set_platdata routine   Uwe Kleine-König
• [PATCH 1/2] ARM imx53: add pwm devices support   Uwe Kleine-König
• [PATCH 1/2] ARM imx53: add pwm devices support   Uwe Kleine-König
• [RFC] device.h: add device_set_platdata routine   Uwe Kleine-König
• [PATCH 1/2] ARM imx53: add pwm devices support   Uwe Kleine-König
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Uwe Kleine-König
• [PATCH 0/2] 3 build failures in imx-for-2.6.39   Uwe Kleine-König
• [PATCH 1/2] ARM: mx3/cpuimx35: fix build failure   Uwe Kleine-König
• [PATCH 2/2] ARM: mx3/pcm043: fix build failure   Uwe Kleine-König
• [PATCH 1/2] ARM: iomux-imx31: mark pin_list as const   Uwe Kleine-König
• [PATCH 2/2] ARM: mxc91231/iomux: mark pin_list as const   Uwe Kleine-König
• [PATCH 1/2] ARM: mx3/cpuimx35: fix build failure   Uwe Kleine-König
• [PATCH] ARM: mx5: forbid building i.MX51 with any of i.MX50 or i.MX53   Uwe Kleine-König
• [PATCH] ARM: imx/mx25_3ds: Fix build failure   Uwe Kleine-König
• [PATCH 1/2 v2] ARM: iomux-imx31: allow pin_list to be const   Uwe Kleine-König
• [PATCH 2/2 v2] ARM: mxc91231/iomux: allow pin_list to be const   Uwe Kleine-König
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Uwe Kleine-König
• [PATCH] ARM: mxs/mx28evk: add flexcan devices   Uwe Kleine-König
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Uwe Kleine-König
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• [patch v2 1/2] mc13892: reboot on wdi event   Uwe Kleine-König
• about MISC_DEVICES not being enabled in many defconfigs   Uwe Kleine-König
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Uwe Kleine-König
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Uwe Kleine-König
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Uwe Kleine-König
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Uwe Kleine-König
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Uwe Kleine-König
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Uwe Kleine-König
• [PATCH] ARM: mxc91231: select MXC_AVIC   Uwe Kleine-König
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Uwe Kleine-König
• [PATCH 0/6] move mach-mx3/* to mach-imx   Uwe Kleine-König
• [PATCH 1/6] ARM: mxc91231: select MXC_AVIC   Uwe Kleine-König
• [PATCH 2/6] ARM: mx3: dynamically allocate "mxc_rtc" devices   Uwe Kleine-König
• [PATCH 3/6] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Uwe Kleine-König
• [PATCH 4/6] ARM: mx3/mx31moboard: properly allocate memory for mx3-camera   Uwe Kleine-König
• [PATCH 5/6] [RFC] ARM: mx3: dynamically allocate "ipu-core" devices   Uwe Kleine-König
• [PATCH 6/6] ARM: imx: move mx3 support to mach-imx   Uwe Kleine-König
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Uwe Kleine-König
• [PATCH 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31   Uwe Kleine-König
• [PATCH 4/4] mx31_3ds: Add support for the camera device on the personality board   Uwe Kleine-König
• [PATCH 0/2] Common struct clk implementation, v14   Uwe Kleine-König
• [PATCH 1/1] ARM: mx53_loco: Add GPIO Keypad support   Uwe Kleine-König
• [PATCH 1/1 v2] ARM: mx53_loco: Add GPIO Keypad support   Uwe Kleine-König
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Uwe Kleine-König
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Uwe Kleine-König
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Uwe Kleine-König
• [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init   Uwe Kleine-König
• [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init   Uwe Kleine-König
• [PATCH v4 3/6] ARM: mxs: dynamically allocate mmc device   Uwe Kleine-König
• [PATCH] ARM: mxs: fix naming of struct holding info for mxs-i2c devices   Uwe Kleine-König
• [PATCH 2/4] ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset   Uwe Kleine-König
• [PATCH 1/4] ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset   Uwe Kleine-König
• [PATCH v2 2/4] ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset   Uwe Kleine-König
• [PATCH 2/9] lpc2k: Exception vector handling   Uwe Kleine-König
• [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI   Uwe Kleine-König
• [GIT PULL] omap changes for v2.6.39 merge window   Uwe Kleine-König
• [PATCH] ARM: imx: let MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_SSI   Uwe Kleine-König
• [PATCH] ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes   Uwe Kleine-König
• [PATCH v6 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH v7 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH v8 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH v10 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH v10 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH v10 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH v11 1/1] PRUSS UIO driver support   Hans J. Koch
• [PATCH] omap3: beaglexm: fix user button.   Koen Kooi
• [PATCH] arm: mach-kirkwood: add led in sheevaplug-setup.c   Peter Korsgaard
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Peter Korsgaard
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Peter Korsgaard
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Peter Korsgaard
• [GIT PULL] omap fixes for v2.6.38-rc6   Aaro Koskinen
• [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path   Aaro Koskinen
• [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value   Aaro Koskinen
• [PATCH 2/2] arm: mach-omap2: omap_l3_smx: fix irq handler setup   Aaro Koskinen
• [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation   Aaro Koskinen
• [PATCH v5] dmaengine: mxs-dma: add dma support for i.MX23/28   Koul, Vinod
• [PATCH 0/8 resend] dw_dmac: Extending support & minor fixes   Koul, Vinod
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32   Koul, Vinod
• [PATCH 4/8 resend] dw_dmac: calling dwc_scan_descriptors from dwc_tx_status() after taking lock   Koul, Vinod
• [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish   Koul, Vinod
• [PATCH 7/8 resend] dw_dmac.c: Pass Channel Allocation Order from platform_data   Koul, Vinod
• [PATCH 8/8 resend] dw_dmac.c: Pass Channel Priority from platform_data   Koul, Vinod
• [PATCH V2 00/13] dmaengine/dw_dmac: Extending support & minor fixes   Koul, Vinod
• [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test   Krishnamoorthy, Balaji T
• [PATCH 00/20] world-writable files in sysfs and debugfs   Vasiliy Kulikov
• [Security] [PATCH 00/20] world-writable files in sysfs and debugfs   Vasiliy Kulikov
• [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes   Viresh Kumar
• [PATCH V6 1/8] ST SPEAr: Reordering #includes in .h & .c files.   Viresh Kumar
• [PATCH V6 2/8] ST SPEAr: Include mach/hardware.h instead of mach/spear.h   Viresh Kumar
• [PATCH V6 3/8] ST SPEAr3xx: Rename sdio to sdhci   Viresh Kumar
• [PATCH V6 4/8] ST SPEAr Clock Framework: Rename usbd clock and align apb_clk entry   Viresh Kumar
• [PATCH V6 5/8] ST SPEAr3xx: Declare device structures after shirq code   Viresh Kumar
• [PATCH V6 6/8] ST SPEAr: Replacing SIZE macro's with SZ_4K macros   Viresh Kumar
• [PATCH V6 7/8] ST SPEAr: Remove unused *_SIZE macros from spear*.h files   Viresh Kumar
• [PATCH V6 8/8] ST SPEAr: Append UL to device address macros.   Viresh Kumar
• [PATCH V6 00/11] SPEAr3xx & SPEAr6xx: Single Image solution and padmux updates   Viresh Kumar
• [PATCH V6 01/11] ST SPEAr: Pad multiplexing handling modified   Viresh Kumar
• [PATCH V6 02/11] ST SPEAr clock: Define common clk_init routine in plat/clock.c   Viresh Kumar
• [PATCH V6 03/11] ST SPEAr Clock: Updating for single image solution   Viresh Kumar
• [PATCH V6 04/11] ST SPEAr3xx: Make local shirq structures static   Viresh Kumar
• [PATCH V6 05/11] ST SPEAR3xx: Rename register/irq defines to remove naming conflicts   Viresh Kumar
• [PATCH V6 06/11] ST SPEAr3xx: Rework pmx_dev code to remove conflicts   Viresh Kumar
• [PATCH V6 07/11] ST SPEAr3xx: Appending spear3** with global device structures   Viresh Kumar
• [PATCH V6 08/11] ST SPEAr3xx: Rework KConfig to allow all boards to be compiled in   Viresh Kumar
• [PATCH V6 09/11] ST SPEAr3xx: Replace defconfigs with single unified defconfig   Viresh Kumar
• [PATCH V6 00/10] Adding SPEAr13xx support   Viresh Kumar
• [PATCH V6 01/10] ST SPEAr13xx: Adding machine specific header files   Viresh Kumar
• [PATCH V6 02/10] ST SPEAr13xx: Adding machine specific src files   Viresh Kumar
• [PATCH V6 03/10] ST SPEAr13xx: Adding support in SPEAr generic plat/   Viresh Kumar
• [PATCH V6 04/10] ST SPEAr13xx: Added compilation support in arch/arm/   Viresh Kumar
• [PATCH V6 05/10] ST SPEAr13xx: Adding default config file   Viresh Kumar
• [PATCH V6 06/10] ST SPEAr13xx: Adding information in Documentation/ and MAINTAINERS   Viresh Kumar
• [PATCH V6 07/10] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms   Viresh Kumar
• [PATCH V6 08/10] ST SPEAr13xx: add L2 cache support   Viresh Kumar
• [PATCH V6 09/10] ST SPEAr13xx: Adding support for SPEAr1310   Viresh Kumar
• [PATCH V6 00/17] Adding devices support for all spear machines   Viresh Kumar
• [PATCH V6 01/17] ST SPEAr13xx: Added ARM PL061 GPIO Support   Viresh Kumar
• [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support.   Viresh Kumar
• [PATCH V6 03/17] ST SPEAr: Adding PLGPIO driver for spear platform   Viresh Kumar
• [PATCH V6 04/17] ST SPEAr3xx: Adding support for ST's PWM IP   Viresh Kumar
• [PATCH V6 05/17] ST SPEAr: Adding Watchdog support on spear3xx & spear6xx machines   Viresh Kumar
• [PATCH V6 06/17] ST SPEAr3xx: Adding RAS uart devices   Viresh Kumar
• [PATCH V6 07/17] ST SPEAr320: Adding support for CAN   Viresh Kumar
• [PATCH V6 08/17] ST SPEAr3xx: EMI (External Memory Interface) controller driver   Viresh Kumar
• [PATCH V6 09/17] ST SPEAr: Adding machine support for rtc-spear   Viresh Kumar
• [PATCH V6 0/3] Clock Framework & CPU Freq Updates   Viresh Kumar
• [PATCH V6 1/3] ST SPEAr Clock Framework: Adding support for DDR   Viresh Kumar
• [PATCH V6 2/3] ST SPEAr Clock Framework: Adding support for PLL frequency change   Viresh Kumar
• [PATCH V6 3/3] ST SPEAr CPU freq: Adding support for CPU Freq framework   Viresh Kumar
• [PATCH V6 10/11] ST SPEAr6xx: Rework Kconfig for single image solution   Viresh Kumar
• [PATCH V6 11/11] ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig   Viresh Kumar
• [PATCH V6 10/10] ST SPEAr13xx: Add padmux support   Viresh Kumar
• [PATCH V6 10/17] ST SPEAr: adding support for synopsis i2c designware   Viresh Kumar
• [PATCH V6 11/17] ST SPEAr: Adding machine support for USB host   Viresh Kumar
• [PATCH V6 12/17] ST SPEAr: Adding machine support for keyboard   Viresh Kumar
• [PATCH V6 13/17] ST SPEAr: Adding machine support for nand   Viresh Kumar
• [PATCH V6 14/17] ST SPEAr: Adding support for SSP PL022   Viresh Kumar
• [PATCH V6 15/17] ST SPEAr: Adding support for SDHCI (SDIO)   Viresh Kumar
• [PATCH V6 16/17] ST SPEAr Power Management: Added the support for Standby mode.   Viresh Kumar
• [PATCH V6 17/17] ST SPEAr: Updating defconfigs   Viresh Kumar
• [PATCH V2 00/13] dmaengine/dw_dmac: Extending support & minor fixes   Viresh Kumar
• [PATCH V2 01/13] dw_dmac: Remove compilation dependency from AVR32 and put on HAVE_CLK   Viresh Kumar
• [PATCH V2 02/13] dw_dmac: Replace module_init() with subsys_initcall()   Viresh Kumar
• [PATCH V2 03/13] dw_dmac: Move single descriptor from dwc->queue to dwc->active_list in dwc_complete_all   Viresh Kumar
• [PATCH V2 04/13] dw_dmac: Calling dwc_scan_descriptors from dwc_tx_status() after taking lock   Viresh Kumar
• [PATCH V2 05/13] dw_dmac: Adding support for 64 bit access width for memcpy xfers   Viresh Kumar
• [PATCH V2 06/13] dw_dmac: Change value of DWC_MAX_COUNT to 4095.   Viresh Kumar
• [PATCH V2 07/13] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish   Viresh Kumar
• [PATCH V2 08/13] dw_dmac: Pass Channel Allocation Order from platform_data   Viresh Kumar
• [PATCH V2 09/13] dw_dmac: Pass Channel Priority from platform_data   Viresh Kumar
• [PATCH V2 10/13] dw_dmac: Changing type of src_master and dest_master to u8.   Viresh Kumar
• [PATCH V2 11/13] dw_dmac: Allow src/dst msize & flow controller to be configured at runtime   Viresh Kumar
• [PATCH V2 12/13] dw_dmac: Setting Default Burst length for transfers as 16.   Viresh Kumar
• [PATCH V2 13/13] avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize   Viresh Kumar
• [PATCH] dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel   Viresh Kumar
• [PATCH 06/13 resend] dw_dmac: Change value of DWC_MAX_COUNT to 4095.   Viresh Kumar
• [PATCH 11/13 resend] dw_dmac: Allow src/dst msize & flow controller to be configured at runtime   Viresh Kumar
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support.   Viresh Kumar
• [PATCH 0/4] Fix ST-Ericsson Ux500 specific PL022 & PL180 amba devices   Philippe Langlais
• [PATCH 1/4] amba: add name based matching   Philippe Langlais
• [PATCH 2/4] amba-pl022: Add loopback support for the SPI on 5500   Philippe Langlais
• [PATCH 3/4] mmci/pl180: Support for db8500v2. ST-Ericsson modified ARM PrimeCell PL180 block has not got an updated corresponding amba-id, althought the IP block has changed in db8500v2. The change was done to the datactrl register.   Philippe Langlais
• [PATCH 4/4] ux500: pass name for db5500-spi & db8500v2-sdi devices   Philippe Langlais
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Julia Lawall
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Julia Lawall
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Julia Lawall
• [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region   Julia Lawall
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Julia Lawall
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Julia Lawall
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Julia Lawall
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Julia Lawall
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Julia Lawall
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Julia Lawall
• [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Donghwa Lee
• [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Donghwa Lee
• [PATCH v2] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Donghwa Lee
• [PATCH v2] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Donghwa Lee
• [PATCH v3] ARM: EXYNOS4: enabled lcd and backlight in NURI board   Donghwa Lee
• [PATCH] ARM: EXYNOS4: CPUIDLE Support   Jaecheol Lee
• [PATCH 0/3] ARM: EXYNOS4: Support suspend to ram   Jaecheol Lee
• [PATCH 1/3] ARM: EXYNOS4: Add PMU Registers for PM   Jaecheol Lee
• [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support   Jaecheol Lee
• [PATCH 3/3] ARM: EXYNOS4: Update HRT for supporting PM   Jaecheol Lee
• [PATCH 2/3] arm: pmu: support pmu irq routed from CTI   Ming Lei
• [patch v1 2/3] arm: pmu: support pmu irq routed from CTI   Ming Lei
• [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling   Ming Lei
• [patch v3 1/3] arm: introduce cross trigger interface helpers   Ming Lei
• [PATCH 1/1] ARM: mx53_loco: Add GPIO Keypad support   Frank Li
• [PATCH 1/1 v2] ARM: mx53_loco: Add GPIO Keypad support   Frank Li
• [PATCH 1/1 v3] ARM: mx53_loco: Add GPIO Keypad support   Frank Li
• [PATCH 2/4] ARM:boot:device tree: Merge specific atags into the device tree   Grant Likely
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Grant Likely
• [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Grant Likely
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Grant Likely
• [PATCH] arm/dt: Add dtb make rule   Grant Likely
• [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Grant Likely
• [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Grant Likely
• [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Grant Likely
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.   Grant Likely
• [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Grant Likely
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Grant Likely
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Grant Likely
• [PATCH 1/2] [ARM] am200epd: fix resource leak in am200_init_gpio_regs error path   Axel Lin
• [PATCH 2/2] [ARM] am300epd: fix resource leak in am300_init_gpio_regs error path   Axel Lin
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c   Tony Lindgren
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Tony Lindgren
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Tony Lindgren
• [PATCH] arm: omap: fix section mismatch warning   Tony Lindgren
• [PATCH] ldp: Fix regulator mapping for ads7846 TS controller   Tony Lindgren
• [PATCHv2] omap:mailbox: resolve hang issue   Tony Lindgren
• [patch v3 3/3] arm: omap4: support pmu   Tony Lindgren
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Tony Lindgren
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Tony Lindgren
• [GIT PULL] Remaining omap fixes for 2.6.37-r7   Tony Lindgren
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Tony Lindgren
• [PATCH] OMAP1: McBSP: fix build break for non-multi-OMAP1 configs   Tony Lindgren
• [PATCH] audio : AM3517 : Adding i2c info for AIC23 codec   Tony Lindgren
• [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver   Tony Lindgren
• [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver   Tony Lindgren
• [PATCH] omap2+: mux: Remove the use of IDLE flag.   Tony Lindgren
• [PATCH] omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE flag)   Tony Lindgren
• [PATCH v2 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support   Tony Lindgren
• [PATCH] omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE flag)   Tony Lindgren
• [PATCH 0/2] omap2+: Few mux patches   Tony Lindgren
• [PATCH 1/2] omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected   Tony Lindgren
• [PATCH 2/2] omap4: mux: Remove duplicate mux modes   Tony Lindgren
• [PATCH 2/2] omap4: mux: Remove duplicate mux modes   Tony Lindgren
• [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver   Tony Lindgren
• [RFC PATCH 3/5] OMAP2+:Common CPU DIE ID reading code reads wrong registers for OMAP4430   Tony Lindgren
• [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path   Tony Lindgren
• [PATCH] omap: zoom: host should not pull up wl1271's irq line   Tony Lindgren
• [GIT PULL] OMAP PM updates for 2.6.39   Tony Lindgren
• [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver   Tony Lindgren
• [GIT PULL] omap changes for v2.6.39 merge window   Tony Lindgren
• [GIT PULL] omap changes for v2.6.39 merge window   Tony Lindgren
• [GIT PULL] omap changes for v2.6.39 merge window   Tony Lindgren
• [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value   Tony Lindgren
• [PATCH 0/3] ARM: OMAP2+: gpmc warning fixes   Tony Lindgren
• [GIT PULL] omap changes for v2.6.39 merge window   Tony Lindgren
• [GIT PULL] OMAP PM updates for 2.6.39   Tony Lindgren
• When does mach-types get updated in a tree?   John Linn
• When does mach-types get updated in a tree?   John Linn
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• Fwd: [RFC] MMC: error handling improvements   Russell King - ARM Linux
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [PATCH 1/2] ARM: mx3/cpuimx35: fix build failure   Russell King - ARM Linux
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Russell King - ARM Linux
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip   Russell King - ARM Linux
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Russell King - ARM Linux
• [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files   Russell King - ARM Linux
• [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files   Russell King - ARM Linux
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Russell King - ARM Linux
• clcdfb: Question about clcdfb_check() routine   Russell King - ARM Linux
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Russell King - ARM Linux
• [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour   Russell King - ARM Linux
• Compiling a kernel for armv5 + armv6   Russell King - ARM Linux
• [RFC PATCH] ARM: Use generic BUG() handler   Russell King - ARM Linux
• rmk out of action until further notice   Russell King - ARM Linux
• Recall: [PATCH 1/2] ARM imx53: add pwm devices support   Russell King - ARM Linux
• [PATCH] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board   Russell King - ARM Linux
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32   Russell King - ARM Linux
• [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes   Russell King - ARM Linux
• [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes   Russell King - ARM Linux
• [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes   Russell King - ARM Linux
• staging: iio: ak8975: make gpio platdata mandatory   Russell King - ARM Linux
• [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL   Russell King - ARM Linux
• [PATCH] [ARM] tlb: fix build error with CONFIG_SWAP=n   Russell King - ARM Linux
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Wayoperationcan cause data corruption   Russell King - ARM Linux
• Amba CLCD register definitions   Russell King - ARM Linux
• [PATCH 1/3] This patch adds support HR-Timer(High Resolution Timer) and dynamic tick system for S5P SoCs. There are many clock sources for HR-Timer on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used for clock source. This patch can only support PWM timer for clocksource of S5P64x0 and S5PV210.   Russell King - ARM Linux
• [PATCH V6 7/8] ST SPEAr: Remove unused *_SIZE macros from spear*.h files   Russell King - ARM Linux
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Russell King - ARM Linux
• [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support   Russell King - ARM Linux
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Russell King - ARM Linux
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Russell King - ARM Linux
• Recall: [RFC 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Russell King - ARM Linux
• [PATCH 2/8] macb: detect hclk presence from platform data   Russell King - ARM Linux
• i.MX Pull request for -next   Russell King - ARM Linux
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Russell King - ARM Linux
• [PATCH v3 0/7] ARM timer clock api support   Russell King - ARM Linux
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Russell King - ARM Linux
• [PATCH 02/10] ux500: Adding new board files for snowball.   Russell King - ARM Linux
• [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39   Russell King - ARM Linux
• [PATCH] macb: detect IP version to determin if we are on at91 or avr32   Russell King - ARM Linux
• [PATCH] arm: cmpxchg syscall should data abort if page not write or not young   Russell King - ARM Linux
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Russell King - ARM Linux
• [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39   Russell King - ARM Linux
• [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39   Russell King - ARM Linux
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Russell King - ARM Linux
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Russell King - ARM Linux
• [GIT PULL] ux500,u300,nomadik core changes for 2.6.39   Russell King - ARM Linux
• [PATCH v3 0/7] ARM timer clock api support   Russell King - ARM Linux
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Russell King - ARM Linux
• [PATCH] DM644x EVM: register MUSB device earlier   Russell King - ARM Linux
• [GIT PULL] Samsung S5P for 2.6.39 merge window   Russell King - ARM Linux
• [PATCH 1/4] amba: add name based matching   Russell King - ARM Linux
• [PATCH] ARMv7: Flush the vectors page using the base address   Russell King - ARM Linux
• When does mach-types get updated in a tree?   Russell King - ARM Linux
• [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name   Russell King - ARM Linux
• [PATCH] arm: mmci: Add ARM variant with extended FIFO   Russell King - ARM Linux
• [PATCH 1/4] amba: add name based matching   Russell King - ARM Linux
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Russell King - ARM Linux
• [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name   Russell King - ARM Linux
• [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI   Russell King - ARM Linux
• Why don't we have atomic_set_mask()?   Russell King - ARM Linux
• Why don't we have atomic_set_mask()?   Russell King - ARM Linux
• [GIT PULL] omap changes for v2.6.39 merge window   Russell King - ARM Linux
• compiling 2.6.37 kernel in THUMB2 mode   Russell King - ARM Linux
• [PATCH v2 2/9] lpc2k: Exception vector handling   Russell King - ARM Linux
• [PATCH v2 4/9] lpc2k: generic time and clockevents   Russell King - ARM Linux
• [PATCH v2 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board   Russell King - ARM Linux
• [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51   Russell King - ARM Linux
• [PATCH v2 1/9] lpc2k: Core support   Russell King - ARM Linux
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Russell King - ARM Linux
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Russell King - ARM Linux
• [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code.   Russell King - ARM Linux
• [PATCH] ARM: Merge v6 and v7 DEBUG_LL DCC support   Russell King - ARM Linux
• Updated mach-types update   Russell King - ARM Linux
• Updated mach-types update   Russell King - ARM Linux
• [GIT PULL] pxa: patches for 2.6.39   Russell King - ARM Linux
• Booting Integrator/AP with ARM920T   Russell King - ARM Linux
• Build warning in todays linus/master   Russell King - ARM Linux
• [PATCH v4 08/19] ARM: LPAE: Introduce the 3-level page table format definitions   Russell King - ARM Linux
• [PATCH V6 00/11] SPEAr3xx & SPEAr6xx: Single Image solution and padmux updates   Russell King - ARM Linux
• Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"   Russell King - ARM Linux
• Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"   Russell King - ARM Linux
• [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51   Russell King - ARM Linux
• [PATCH] ARM: Remove bouncing author email from arch/arm/plat-iop/time.c   Russell King - ARM Linux
• [PATCH 07/20] video: msm: Allow users to request a larger x and y virtual fb   Russell King - ARM Linux
• dma cache coherency issue   Russell King - ARM Linux
• Updated mach-types update   Russell King - ARM Linux
• Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"   Russell King - ARM Linux
• [PATCH] ARM: Use asm-generic/sizes.h   Russell King - ARM Linux
• Updated mach-types update   Russell King - ARM Linux
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Jason Liu
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support   Jason Liu
• [PATCH] net/fec: check id_entry pointer before using it   Jason Liu
• [PATCH] net/fec: check id_entry pointer before using it   Jason Liu
• [PATCH] arm/dt: Add dtb make rule   Jason Liu
• [PATCH RESEND] S3C2440: AT2440EVB: Add touchscreen support   Ramax Lo
• [PATCH 09/10] MCDE: Add build files and bus   Marcus Lorentzon
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Fernando Guzman Lugo
• [PATCH] OMAP:iommu - pgd and pte entries weren't getting flushed out   Fernando Guzman Lugo
• [PATCH] OMAP2+: hwmod: use status bit info for reset line   Omar Ramirez Luna
• [PATCH v2 0/4] OMAP: iommu: hwmod support and runtime PM   Omar Ramirez Luna
• [PATCH v2 1/4] OMAP3: hwmod data: add mmu data for iva and isp   Omar Ramirez Luna
• [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Omar Ramirez Luna
• [PATCH v2 3/4] OMAP3/4: iommu: migrate to hwmod framework   Omar Ramirez Luna
• [PATCH v2 4/4] OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH] MAINTAINERS: Update MSM maintainers   Pavel Machek
• MMC quirks relating to performance/lifetime.   Pavel Machek
• [PATCH 1/8] ARM: PXA: Z2: Use only power button as wake source   Pavel Machek
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Pavel Machek
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Pavel Machek
• [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo   Pavel Machek
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Pavel Machek
• pxa27x/spitz: serials in recent kernels   Pavel Machek
• [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo   Pavel Machek
• reboot/kexec in 2.6.38   Pavel Machek
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Ryan Mallon
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Ryan Mallon
• Linux support for Samsung S3C2510A Processor   Madhavi Manchala
• hard coded value for idcode field in struct cpu_table   Madhavi Manchala
• hard coded value for idcode field in struct cpu_table   Madhavi Manchala
• error: #error Unknown data abort handler type from glue.h file   Madhavi Manchala
• [PATCH RFC] arm: mini2440: Fix uda134x codec problem.   Belisko Marek
• Store buffer and l2x0_cache_sync   Catalin Marinas
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness   Catalin Marinas
• SMP soft lockup on smp_call_function_many when doing flush_tlb_page   Catalin Marinas
• SMP soft lockup on smp_call_function_many when doing flush_tlb_page   Catalin Marinas
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Catalin Marinas
• SMP soft lockup on smp_call_function_many when doing flush_tlb_page   Catalin Marinas
• [RFC] ARM: Cortex-A9: Enable dynamic clock gating   Catalin Marinas
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Catalin Marinas
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables   Catalin Marinas
• One quick question about SMP on ARM   Catalin Marinas
• [PATCH] ARMv7: Flush the vectors page using the base address   Catalin Marinas
• [PATCH] ARMv7: Flush the vectors page using the base address   Catalin Marinas
• [PATCH v4 08/19] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH v4 08/19] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH 1/4] ASoC: Add TI tlv320aic32x4 codec support.   javier Martin
• [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support.   javier Martin
• [PATCH] ARM: imx: Add tlv320aic32x4 board specific code to Visstrim_M10.   javier Martin
• [RFC PATCH] ARM: Use generic BUG() handler   Dave Martin
• [RFC PATCH] ARM: Use generic BUG() handler   Dave Martin
• [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour   Dave Martin
• [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour   Dave Martin
• [RFC PATCH] ARM: Use generic BUG() handler   Dave Martin
• [PATCH v2] ARM: Thumb-2: Add local symbols to work around gas behaviour   Dave Martin
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v5 1/5] ARM: omap4: Provide do_wfi() for Thumb-2   Dave Martin
• [PATCH v5 2/5] ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v5 3/5] ARM: omap3: Remove hand-encoded SMC instructions   Dave Martin
• [PATCH v5 4/5] ARM: omap3: Thumb-2 compatibility for sram34xx.S   Dave Martin
• [PATCH v5 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S   Dave Martin
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Dave Martin
• [RFC PATCH V2] ARM: Use generic BUG() handler   Dave Martin
• [PATCH v2 REPOST] ARM: Thumb-2: Add local symbols to work around gas behaviour   Dave Martin
• [PATCH v2 REPOST] ARM: Thumb-2: Add local symbols to work around gas behaviour   Dave Martin
• compiling 2.6.37 kernel in THUMB2 mode   Dave Martin
• [RFC] kprobes with thumb2 conditional code   Dave Martin
• [RFC] kprobes with thumb2 conditional code   Dave Martin
• [PATCH] ARM: kernel/sleep.S: fix Thumb2 compilation issues   Dave Martin
• No subject   Javier Martin
• [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support.   Javier Martin
• [PATCH v2 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi.   Javier Martin
• [PATCH v2 3/4] ASoC: Add machine driver for Visstrim_M10 board.   Javier Martin
• [PATCH v2 4/4] ARM: Add SSI and aic3204 code to Visstrim_M10 boards.   Javier Martin
• [PATCH] ARM: imx: Add tlv320aic32x4 board specific code to Visstrim_M10.   Javier Martin
• [PATCH] omap3: beaglexm: fix user button.   Javier Martin
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Marvin
• [PATCH v2 00/18] OMAP3+: PM: introduce SR class 1.5   Nishanth Menon
• [PATCH v2 01/18] omap3: hwmod: add smartreflex irqs   Nishanth Menon
• [PATCH v2 02/18] omap3+: voltage: remove initial voltage   Nishanth Menon
• [PATCH v2 03/18] omap3+: voltage: remove spurious pr_notice for debugfs   Nishanth Menon
• [PATCH v2 04/18] omap3+: voltage: use IS_ERR_OR_NULL   Nishanth Menon
• [PATCH v2 05/18] omap3+: voltage: use volt_data pointer instead values   Nishanth Menon
• [PATCH v2 06/18] omap3+: voltage: add transdone apis   Nishanth Menon
• [PATCH v2 07/18] omap3+: sr: make notify independent of class   Nishanth Menon
• [PATCH v2 08/18] omap3+: sr: introduce class init, deinit and priv data   Nishanth Menon
• [PATCH v2 09/18] omap3+: sr: fix cosmetic indentation   Nishanth Menon
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Nishanth Menon
• [PATCH v2 11/18] omap3+: sr: disable interrupt by default   Nishanth Menon
• [PATCH v2 12/18] omap3+: sr: enable/disable SR only on need   Nishanth Menon
• [PATCH v2 13/18] omap3+: sr: introduce notifiers flags   Nishanth Menon
• [PATCH v2 14/18] omap3+: sr: introduce notifier_control   Nishanth Menon
• [PATCH v2 15/18] omap3+: sr: disable spamming interrupts   Nishanth Menon
• [PATCH v2 16/18] omap3+: sr: make enable path use volt_data pointer   Nishanth Menon
• [PATCH v2 17/18] omap3630+: sr: add support for class 1.5   Nishanth Menon
• [PATCH v2 18/18] omap3430: sr: class3: restrict cpu to run on   Nishanth Menon
• [PATCH v2 15/18] omap3+: sr: disable spamming interrupts   Nishanth Menon
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Nishanth Menon
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Nishanth Menon
• [PATCH v2] OMAP2PLUS: Replace voltage values with Macros   Nishanth Menon
• [PATCH v2] OMAP2PLUS: Replace voltage values with Macros   Menon, Nishanth
• [PATCH v3] OMAP3+: OPP: Replace voltage values with Macros   Nishanth Menon
• [PATCH V3 00/19] OMAP3+: PM: introduce SR class 1.5   Nishanth Menon
• [PATCH V3 01/19] OMAP3: hwmod: add SmartReflex IRQs   Nishanth Menon
• [PATCH V3 02/19] OMAP3+: voltage: fix build warning   Nishanth Menon
• [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage   Nishanth Menon
• [PATCH V3 04/19] OMAP3+: voltage: remove spurious pr_notice for debugfs   Nishanth Menon
• [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL   Nishanth Menon
• [PATCH V3 06/19] OMAP3+: voltage: use volt_data pointer instead values   Nishanth Menon
• [PATCH V3 07/19] OMAP3+: voltage: add transdone APIs   Nishanth Menon
• [PATCH V3 08/19] OMAP3+: SR: make notify independent of class   Nishanth Menon
• [PATCH V3 09/19] OMAP3+: SR: disable interrupt by default   Nishanth Menon
• [PATCH V3 10/19] OMAP3+: SR: enable/disable SR only on need   Nishanth Menon
• [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation   Nishanth Menon
• [PATCH V3 12/19] OMAP3+: SR: introduce class start, stop and priv data   Nishanth Menon
• [PATCH V3 13/19] OMAP3+: SR: Reuse sr_[start|stop]_vddautocomp functions   Nishanth Menon
• [PATCH V3 14/19] OMAP3+: SR: introduce notifiers flags   Nishanth Menon
• [PATCH V3 15/19] OMAP3+: SR: introduce notifier_control   Nishanth Menon
• [PATCH V3 16/19] OMAP3+: SR: disable spamming interrupts   Nishanth Menon
• [PATCH V3 17/19] OMAP3+: SR: make enable path use volt_data pointer   Nishanth Menon
• [PATCH V3 18/19] OMAP3630+: SR: add support for class 1.5   Nishanth Menon
• [PATCH V3 19/19] OMAP3430: SR: class3: restrict CPU to run on   Nishanth Menon
• [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL   Nishanth Menon
• [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage   Nishanth Menon
• [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL   Nishanth Menon
• [PATCH v3] OMAP3+: OPP: Replace voltage values with Macros   Nishanth Menon
• [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage   Nishanth Menon
• [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP   Nishanth Menon
• [PATCH V2 2/3] OMAP4: Update Voltage Rail Values for MPU/IVA   Nishanth Menon
• [PATCH V2 3/3] OMAP4: Add IVA OPP enteries.   Nishanth Menon
• [PATCH V2 0/3]: OMAP4: Update OPP Table and Voltage Rail Values   Nishanth Menon
• [PATCH] OMAP4: Intialize IVA Device in addition to DSP device.   Nishanth Menon
• [PATCH V3 2/3] OMAP4: Update Voltage Rail Values for MPU, IVA and CORE   Nishanth Menon
• [PATCH] OMAP4: PM: remove redundant #ifdef CONFIG_PM   Nishanth Menon
• [PATCH V2] OMAP4: Intialize IVA Device in addition to DSP device.   Menon, Nishanth
• [PATCH 1/2] ARM imx53: add pwm devices support   Eric Miao
• [PATCH 1/2] ARM imx53: add pwm devices support   Eric Miao
• [PATCH 2/6] ARM: pxa2xx: reorganize I2C files   Eric Miao
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Eric Miao
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Eric Miao
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Eric Miao
• [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management   Eric Miao
• [PATCH 3/4] ARM: PXA: PXAFB: Fix typo in ypos assignment   Eric Miao
• [PATCH 2/4] ARM: PXA: PXAFB: Fix plane Z-ordering problem   Eric Miao
• [PATCH 4/4] ARM: PXA: PXAFB: don't disable controller on cpufreq transition if overlay is in use   Eric Miao
• reboot/kexec in 2.6.38   Eric Miao
• [PATCH 2/2] [ARM] am300epd: fix resource leak in am300_init_gpio_regs error path   Eric Miao
• [PATCH 1/2] [ARM] am200epd: fix resource leak in am200_init_gpio_regs error path   Eric Miao
• [GIT PULL] pxa: patches for 2.6.39   Eric Miao
• Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"   Eric Miao
• Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"   Eric Miao
• [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support   David Miller
• [PATCH v2 0/2] CS89x0: add QQ2440 networking support   David Miller
• [PATCHv2 0/9] macb: add support for Cadence GEM   David Miller
• [PATCH] arm: realview: Fix secondary GIC initialisation for EB with MPCore tile   Pawel Moll
• [PATCH] arm: mmci: Add ARM variant with extended FIFO   Pawel Moll
• [PATCH] arm: mmci: Add ARM variant with extended FIFO   Pawel Moll
• [PATCH] arm: mmci: Add ARM variant with extended FIFO   Pawel Moll
• [PATCH] kbuild: reenable section mismatch analysis   Andrew Morton
• [PATCH] kbuild: reenable section mismatch analysis   Andrew Morton
• [Security] [PATCH 00/20] world-writable files in sysfs and debugfs   Andrew Morton
• [PATCH] msm: iommu: Use relaxed register access functions   Stepan Moskovchenko
• [PATCH] Input: tca6416-keypad: Change to module_init()   Paul Mundt
• [PATCH] Input: tca6416-keypad: Change to module_init()   Paul Mundt
• [PATCH] Input: tca6416-keypad: Change to module_init()   Paul Mundt
• [PATCH] ARM: Use asm-generic/sizes.h   Paul Mundt
• [PATCH v3 0/3] OMAP: DSS2: Fix for DISPC core functional clock divider   Raghuveer Murthy
• [PATCH v3 1/3] OMAP: DSS2: Adding dss_features for independent core clk divider   Raghuveer Murthy
• [PATCH v3 2/3] OMAP: DSS2: Renaming register macro DISPC_DIVISOR(ch)   Raghuveer Murthy
• [PATCH v3 3/3] OMAP4: DSS2: Using dss_features to set independent core clock divider   Raghuveer Murthy
• EXPLORE: Lifesciences in India!   Tushara S. Nair
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Murali Nalajala
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Murali Nalajala
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Murali Nalajala
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Murali Nalajala
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone.   Murali Nalajala
• [PATCH 1/3] ARM: S5P: Add s5p_timer support for HRT   Sylwester Nawrocki
• [PATCH/RFC 0/3] ARM: S5P: Add common DPHY control code for MIPI-CSIS/MIPI-DSIM devices   Sylwester Nawrocki
• [PATCH 1/3] ARM: S5P: Rename MIPI-CSIS header and update Copyright   Sylwester Nawrocki
• [PATCH 2/3] ARM: S5PV210: Add clock entries for MIPI DPHY control   Sylwester Nawrocki
• [PATCH 3/3] ARM: EXYNOS4: Add clock entries for MIPI DPHY control   Sylwester Nawrocki
• [PATCH 1/3] ARM: S5P: Rename MIPI-CSIS header and update Copyright   Sylwester Nawrocki
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration   Sylwester Nawrocki
• [PATCH v2 0/3] ARM: S5P: Add D-PHY control platform helpers for MIPI-CSIS/DSIM drivers   Sylwester Nawrocki
• [PATCH v2 1/3] ARM: S5P: Rename MIPI-CSIS driver header and update Copyright   Sylwester Nawrocki
• [PATCH v2 2/3] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback   Sylwester Nawrocki
• [PATCH v2 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control   Sylwester Nawrocki
• [PATCH v2] ARM: S5P: Add platform helpers for camera GPIO configuration   Sylwester Nawrocki
• [PATCH v2] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback   Sylwester Nawrocki
• [PATCH v3 0/3] ARM: S5P: Add platform helpers for MIPI-CSIS/DSIM DPHY   Sylwester Nawrocki
• [PATCH v3 1/3] ARM: S5P: Rename MIPI-CSIS driver header and update Copyright   Sylwester Nawrocki
• [PATCH v3 2/3] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback   Sylwester Nawrocki
• [PATCH v3 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control   Sylwester Nawrocki
• [PATCH v2 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control   Sylwester Nawrocki
• [PATCH v3 0/3] ARM: S5P: Add platform helpers for MIPI-CSIS/DSIM DPHY   Sylwester Nawrocki
• [PATCH v4 1/3] ARM: S5P: Rename MIPI-CSIS driver header and update Copyright   Sylwester Nawrocki
• [PATCH v4 2/3] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback   Sylwester Nawrocki
• [PATCH v4 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control   Sylwester Nawrocki
• [PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH] i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Rajendra Nayak
• [PATCH] audio:am3517evm support for AIC23   Jarkko Nikula
• [PATCH] OMAP1: McBSP: fix build break for non-multi-OMAP1 configs   Jarkko Nikula
• [PATCH V3 13/19] OMAP3+: SR: Reuse sr_[start|stop]_vddautocomp functions   Jarkko Nikula
• [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type   Jarkko Nikula
• [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type   Jarkko Nikula
• [PATCH 1/1] davinci: changed SRAM allocator to shared ram.   Nori, Sekhar
• [PATCH v10 1/1] PRUSS UIO driver support   Nori, Sekhar
• [PATCH] DM644x EVM: register MUSB device earlier   Nori, Sekhar
• [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod   Nori, Sekhar
• [PATCH] DM644x EVM: register MUSB device earlier   Nori, Sekhar
• [PATCH v3 1/7] mfd: add pruss mfd driver.   Nori, Sekhar
• [PATCH v3 1/7] mfd: add pruss mfd driver.   Nori, Sekhar
• [PATCH v3 1/7] mfd: add pruss mfd driver.   Nori, Sekhar
• [PATCH v17 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod   Nori, Sekhar
• [PATCH v17 10/13] davinci: dm644x: change vpfe capture structure variables for consistency   Nori, Sekhar
• [PATCH v17 13/13] davinci: dm644x EVM: add support for VPBE display   Nori, Sekhar
• [PATCH v17 00/13] davinci vpbe: dm6446 v4l2 driver   Nori, Sekhar
• [PATCH v17 12/13] davinci: dm644x: add support for v4l2 video display   Nori, Sekhar
• [PATCH v17 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod   Nori, Sekhar
• [PATCH 1/4] davinci: psc.h: clean up indentation done using spaces   Sekhar Nori
• [PATCH 2/4] davinci: enable forced transitions on PSC   Sekhar Nori
• [PATCH 3/4] davinci: da850: add support for SATA interface   Sekhar Nori
• [PATCH 4/4] davinci: da850 evm: register SATA device   Sekhar Nori
• [PATCH 00/11] Support for msm8660 and msm8960 dma   Jeff Ohlstein
• [PATCH 01/11] msm: dma: Guard for multiple file inclusion   Jeff Ohlstein
• [PATCH 02/11] msm: dma: Add support for flushing dma channels   Jeff Ohlstein
• [PATCH 03/11] msm: dma: support using dma from modules   Jeff Ohlstein
• [PATCH 04/11] msm: dma: Toggle adm_pclk along with adm_clk   Jeff Ohlstein
• [PATCH 05/11] msm: dma: Remove register macros from header file   Jeff Ohlstein
• [PATCH 06/11] msm: dma: use a platform device for msm_dmov   Jeff Ohlstein
• [PATCH 07/11] msm: dma: Support multiple adms   Jeff Ohlstein
• [PATCH 08/11] msm: dma: Handle probe failure in dma function   Jeff Ohlstein
• [PATCH 09/11] msm: dma: Support msm8x60 dma   Jeff Ohlstein
• [PATCH 10/11] msm: 8960: Split out common initialization code   Jeff Ohlstein
• [PATCH 11/11] msm: dma: support msm8960 dma   Jeff Ohlstein
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Samuel Ortiz
• [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator v2   Samuel Ortiz
• [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator v2   Samuel Ortiz
• [PATCH] sound/soc/pxa/zylonite.c: set .codec_dai_name in initializer   Antonio Ospite
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel   Jean-Christophe PLAGNIOL-VILLARD
• at91samx5: support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] AT91: overall definition: add 5series support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] AT91: PMC header: add 5series support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] AT91: clock: add 5series chip family support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] AT91: AT91SAM9x5 processors support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] AT91: pio: add new PIO3a features   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] AT91: at91sam9x5: add chip and board file   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/8] macb: unify at91 and avr32 platform data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] macb: detect hclk presence from platform data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] macb: detect hclk presence from platform data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/8] macb: unify at91 and avr32 platform data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] macb: convert printk to pr_ and friends   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] macb: support data bus widths > 32 bits   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/8] macb: initial support for Cadence GEM   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/8] macb: initial support for Cadence GEM   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/8] macb: unify at91 and avr32 platform data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] macb: detect hclk presence from platform data   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCHv2 2/2] ux500: Export U8500 SoC info through sysfs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] macb: detect IP version to determin if we are on at91 or avr32   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCHv2 2/2] ux500: Export U8500 SoC info through sysfs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] macb: detect IP version to determin if we are on at91 or avr32   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 4/9] macb: convert printk to netdev_ and friends   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 0/9] macb: add support for Cadence GEM   Jean-Christophe PLAGNIOL-VILLARD
• compiling 2.6.37 kernel in THUMB2 mode   Vincent Palatin
• compiling 2.6.37 kernel in THUMB2 mode   Vincent Palatin
• Fwd: [RFC] MMC: error handling improvements   Murali Krishna Palnati
• [PATCH 0/4] Continue the mx31_3ds machine support   Alberto Panizzo
• [PATCH 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31   Alberto Panizzo
• [PATCH 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board   Alberto Panizzo
• [PATCH 3/4] mach-mx31_3ds: Add support for framebuffer and LCD   Alberto Panizzo
• [PATCH 4/4] mx31_3ds: Add support for the camera device on the personality board   Alberto Panizzo
• [PATCH 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board   Alberto Panizzo
• [PATCHv2 0/4] Continue the mx31_3ds machine support   Alberto Panizzo
• [PATCH 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31   Alberto Panizzo
• [PATCHv2 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board   Alberto Panizzo
• [PATCHv2 3/4] mach-mx31_3ds: Add support for framebuffer and LCD   Alberto Panizzo
• [PATCHv2 4/4] mach-mx31_3ds: Add support for the camera device on the personality board   Alberto Panizzo
• [PATCHv2 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31   Alberto Panizzo
• [PATCHv3 0/4] Continue the mx31_3ds machine support   Alberto Panizzo
• [PATCHv3 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31   Alberto Panizzo
• [PATCHv3 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board   Alberto Panizzo
• [PATCHv3 3/4] mach-mx31_3ds: Add support for framebuffer and LCD   Alberto Panizzo
• [PATCHv3 4/4] mach-mx31_3ds: Add support for the camera device on the personality board   Alberto Panizzo
• [PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT   Kyungmin Park
• [PATCH] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board   Kyungmin Park
• [PATCH] ARM: EXYNOS4: Add ARMLEX4210 Board support file   Kyungmin Park
• [PATCH] ARM: Samsung: change suspend/resume code to depend on CONFIG_SUSPEND   Kyungmin Park
• [PATCH] Exynos4: Basic CPUidle support   Kyungmin Park
• [PATCH] Exynos4: Remove meaningless REGULATOR config option   Kyungmin Park
• staging: iio: ak8975: make gpio platdata mandatory   Kyungmin Park
• [PATCH V2 1/3] ARM: S5P: Add s5p_timer support for HRT   Kyungmin Park
• [GIT PULL] Samsung fixes for 2.6.38-rc8   Kyungmin Park
• [PATCH] Exynos4: Add HSMMC channel 4 support   Kyungmin Park
• [PATCH] Exynos4: Add HSMMC channel 4 support   Kyungmin Park
• [PATCH v2] ARM: EXYNOS4: add a placeholder for board specific interrupts   Kyungmin Park
• [PATCH] ARM: EXYNOS4: CPUIDLE Support   Kyungmin Park
• [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU   Kyungmin Park
• [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers   Joe Perches
• [PATCH] ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c   Joe Perches
• [PATCH 3/8] macb: convert printk to pr_ and friends   Joe Perches
• [PATCH 0/2] Fix resource size miscalculations   Joe Perches
• [trivial PATCH 1/2] treewide: Fix iomap resource size miscalculations   Joe Perches
• [trivial PATCH 2/2] arm: mach-u300/gpio: Fix mem_region resource size miscalculations   Joe Perches
• [RFC PATCH] ARM: Use generic BUG() handler   Mikael Pettersson
• [PATCH] perf: add OMAP support for the new power events   Jean Pihet
• [PATCH 0/2] OMAP: PM: implement devices wakeup latency constraints APIs   Jean Pihet
• [PATCH 1/2] OMAP PM: create a PM layer plugin for the devices wakeup latency constraints   Jean Pihet
• [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs   Jean Pihet
• [patch v3 1/3] arm: introduce cross trigger interface helpers   Jean Pihet
• [patch v3 0/3] arm: pmu: support pmu/perf on OMAP4   Jean Pihet
• [patch v3 1/3] arm: introduce cross trigger interface helpers   Jean Pihet
• [patch v3 2/3] arm: pmu: allow platform specific irq enable/disable handling   Jean Pihet
• [patch v3 2/3] arm: pmu: allow platform specific irq enable/disable handling   Jean Pihet
• [patch v3 3/3] arm: omap4: support pmu   Jean Pihet
• [PATCH 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile   Jean Pihet
• [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs   Jean Pihet
• [PATCH v3 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Jean Pihet
• [PATCH v3 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Jean Pihet
• [PATCH 2/2] OMAP: PM: implement devices constraints APIs   Jean Pihet
• [PATCH 2/2] OMAP: PM: implement devices constraints APIs   Jean Pihet
• [PATCH] perf: add OMAP support for the new power events   Jean Pihet
• [PATCH] perf: add OMAP support for the new power events   Jean Pihet
• [PATCH 2/2] OMAP: PM: implement devices constraints APIs   Jean Pihet
• [PATCH v2 0/7] OMAP: add PM CONSTRAINTS framework   Jean Pihet
• [PATCH v2 1/7] OMAP PM: create a PM layer plugin for per-device constraints   Jean Pihet
• [PATCH v2 2/7] OMAP: PM CONSTRAINTS: add an enum for the classes of constraint   Jean Pihet
• [PATCH v2 3/7] OMAP: PM CONSTRAINTS: implement wake-up latency constraints   Jean Pihet
• [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code   Jean Pihet
• [PATCH v2 5/7] OMAP: PM CONSTRAINTS: add a power domains state update function in hwmod   Jean Pihet
• [PATCH v2 6/7] OMAP: PM CONSTRAINTS: control power domains next state   Jean Pihet
• [PATCH v2 7/7] OMAP: PM CONSTRAINTS: add power domains wake-up latency figures   Jean Pihet
• [GIT PULL] OMAP PM updates for 2.6.39   Jean Pihet
• [GIT PULL] OMAP PM updates for 2.6.39   Jean Pihet
• [PATCH v4 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Jean Pihet
• [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation   Jean Pihet
• [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend   Jean Pihet
• [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code   Jean Pihet
• [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend   Jean Pihet
• [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation   Jean Pihet
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCH 2/4] ARM:boot:device tree: Merge specific atags into the device tree   Nicolas Pitre
• [PATCH 4/4] ARM:boot:device tree: Allow multiple device trees to be appended to zImage   Nicolas Pitre
• [PATCH 2/4] msm: scm: Fix improper register assignment   Nicolas Pitre
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [patch 1/1] t5325: add audio support   Nicolas Pitre
• [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour   Nicolas Pitre
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Nicolas Pitre
• [PATCH 1/2] ARM: Add TS-7800 revisions 6-9   Nicolas Pitre
• [PATCHv2] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx   Nicolas Pitre
• [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions   Nicolas Pitre
• Git pull request: Orion/Kirkwood updates for next merge window   Nicolas Pitre
• [PATCH v2] ARM: Thumb-2: Add local symbols to work around gas behaviour   Nicolas Pitre
• [PATCH v2] arm: cmpxchg syscall should data abort if page not write   Nicolas Pitre
• [PATCH v2] arm: cmpxchg syscall should data abort if page not write   Nicolas Pitre
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [RFC] kprobes with thumb2 conditional code   Nicolas Pitre
• [PATCH] ARM: kernel/sleep.S: fix Thumb2 compilation issues   Nicolas Pitre
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCH v2] arm: cmpxchg syscall should data abort if page not write   Nicolas Pitre
• [PATCH v2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCH v2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode   Premi, Sanjeev
• [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type   Sanjeev Premi
• [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type   Premi, Sanjeev
• [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type   Premi, Sanjeev
• [PATCHv2] omap3: alsa-soc: Remove restrictive checks for cpu type   Premi, Sanjeev
• [PATCHv2] omap3: alsa-soc: Remove restrictive checks for cpu type   Sanjeev Premi
• [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper   Premi, Sanjeev
• [PATCH 1/1] GPIO support for WM8505   Tony Prisk
• [PATCH 1/1] CPU Frequency Scaling for VT8500/WM8505   Tony Prisk
• [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper   Roger Quadros
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Sricharan R
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Sricharan R
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file   Sricharan R
• [PATCH] omap2+: mux: Remove the use of IDLE flag.   Sricharan R
• [PATCH] omap2+: mux: Remove the use of IDLE flag.   Sricharan R
• [PATCH] omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE flag)   Sricharan R
• [PATCH] omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE flag)   Sricharan R
• [PATCH] mmci: separate out ST Micro register defines   Sebastian RASMUSSEN
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Helmut Raiger
• Newbies question: Which tree do I base my mc13783-regulator patches on?   Helmut Raiger
• i.MX31 suspend and VSTBY question   Helmut Raiger
• i.MX31 suspend and VSTBY question   Helmut Raiger
• ALSA issue on DA850/OMAP-L138/AM18x   Rajashekhara, Sudhakar
• [PATCH] OMAP2+: hwmod: use status bit info for reset line   Ramirez Luna, Omar
• [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Ramirez Luna, Omar
• [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Ramirez Luna, Omar
• [PATCH v3] serial: msm_serial_hs: Add MSM high speed UART driver   Mayank Rana
• [PATCH v3] serial: msm_serial_hs: Add MSM high speed UART driver   Mayank Rana
• [PATCH v3] serial: msm_serial_hs: Add MSM high speed UART driver   Mayank Rana
• [PATCH 0/3] ARM: tegra: PCI-e improvements   Mike Rapoport
• [PATCH 1/3] ARM: tegra: PCIE minor code refactoring   Mike Rapoport
• [PATCH 2/3] ARM: tegra: add PCI Express power gating   Mike Rapoport
• [PATCH 3/3] ARM: tegra: trimslice: initialize PCI-e only when running on TrimSlice   Mike Rapoport
• [PATCH] ARM: tegra: trimslice: enable MMC/SD slots   Mike Rapoport
• [GIT PULL]: TrimSlice update   Mike Rapoport
• [PATCH 0/3] Harmony PCI-e and regulators   Mike Rapoport
• [PATCH 1/3] ARM: tegra: harmony: update PCI-e initialization sequence   Mike Rapoport
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mike Rapoport
• [PATCH 3/3] ARM: tegra: update defconfig   Mike Rapoport
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mike Rapoport
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mike Rapoport
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mike Rapoport
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mike Rapoport
• [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mike Rapoport
• [PATCH v2 0/3] Harmony PCI-e and regulators   Mike Rapoport
• [PATCH v2 1/3] ARM: tegra: harmony: update PCI-e initialization sequence   Mike Rapoport
• [PATCH v2 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC   Mike Rapoport
• [PATCH v2 3/3] ARM: tegra: update defconfig   Mike Rapoport
• [PATCH v2 0/3] Harmony PCI-e and regulators   Mike Rapoport
• [GIT PULL] OMAP PM updates for 2.6.39   Stephan Raue
• [GIT PULL] OMAP PM updates for 2.6.39   Stephan Raue
• [PATCH] kbuild: reenable section mismatch analysis   Sam Ravnborg
• [PATCH] ARM: Use asm-generic/sizes.h   Sam Ravnborg
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Zhu Richard-R65037
• Recall: [RFC 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Zhu Richard-R65037
• Recall: [RFC 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Zhu Richard-R65037
• [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Zhu Richard-R65037
• [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Zhu Richard-R65037
• [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Zhu Richard-R65037
• [PATCH V1 1/3] ahci_platform: add two clk pointer member into ahci_platform_data struct   Zhu Richard-R65037
• [PATCH V6 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Zhu Richard-R65037
• [PATCH v2 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile   Robert Richter
• [PATCH 06/10] ux500: added snowball-netev with latest fixes   Alessandro Rubini
• [PATCH 4/6] ARM: mx3/mx31moboard: properly allocate memory for mx3-camera   Philippe Rétornaz
• [PATCH 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile   Sheetal Sahasrabudhe
• [PATCH 1/3] msm: Add support for Scorpion and ScorpionMP PMU   Sheetal Sahasrabudhe
• [PATCH 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Sheetal Sahasrabudhe
• [PATCH 3/3] [ARM] Oprofile: Add Qualcomm Scorpion and ScorpionMP CPU type   Sheetal Sahasrabudhe
• [PATCH 1/3] msm: Add support for Scorpion and ScorpionMP PMU   Sheetal Sahasrabudhe
• [PATCH 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile   Sheetal Sahasrabudhe
• [PATCH v2 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile   Sheetal Sahasrabudhe
• [PATCH v2 1/3] msm: Add support for Scorpion and ScorpionMP PMU   Sheetal Sahasrabudhe
• [PATCH v2 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Sheetal Sahasrabudhe
• [PATCH v2 3/3] [ARM] Oprofile: Add Qualcomm Scorpion and ScorpionMP CPU type   Sheetal Sahasrabudhe
• [PATCH v3 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Sheetal Sahasrabudhe
• [PATCH v2 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Sheetal Sahasrabudhe
• [PATCH v3 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Sheetal Sahasrabudhe
• [PATCH v4 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Sheetal Sahasrabudhe
• [PATCH v4 2/3] [ARM] perfevents: Add support for Scorpion performance monitors   Sheetal Sahasrabudhe
• [PATCH 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support   Steve Sakoman
• [PATCH 1/2] OMAP: Add gpio-leds support for Overo   Steve Sakoman
• [PATCH 2/2] OMAP: Add gpio-keys support for Overo   Steve Sakoman
• [PATCH v2 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support   Steve Sakoman
• [PATCH v2 1/2] OMAP: Add gpio-leds support for Overo   Steve Sakoman
• [PATCH v2 2/2] OMAP: Add gpio-keys support for Overo   Steve Sakoman
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Andres Salomon
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Andres Salomon
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Andres Salomon
• [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs   Wolfram Sang
• [PATCH] arm: mxs: add irq_chip-name for GPIO IRQs   Wolfram Sang
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Wolfram Sang
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Wolfram Sang
• [PATCH V5 4/6] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Wolfram Sang
• [PATCH] net/fec: check id_entry pointer before using it   Wolfram Sang
• [PATCH] ARM: mx27: fix gpt4/5 base address   Wolfram Sang
• [PATCH] net/fec: check id_entry pointer before using it   Wolfram Sang
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Wolfram Sang
• [PATCH V6 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Wolfram Sang
• [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Wolfram Sang
• [PATCH] ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes   Wolfram Sang
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Wolfram Sang
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call   Wolfram Sang
• [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Wolfram Sang
• [PATCH V7 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Wolfram Sang
• [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region   Wim Van Sebroeck
• [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region   Wim Van Sebroeck
• [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH 1/7] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH 2/7] add the common code for GPMI driver   Huang Shijie
• [PATCH 3/7] add the database for the NANDs   Huang Shijie
• [PATCH 4/7] add GPMI support for imx23   Huang Shijie
• [PATCH 5/7] add GPMI support for imx28   Huang Shijie
• [PATCH 6/7] dmaengine: change the flags of request_irq()   Huang Shijie
• [PATCH 7/7] MTD : add GPMI driver in the config and Makefile   Huang Shijie
• [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH 1/7] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH 2/7] add the common code for GPMI driver   Huang Shijie
• [PATCH 3/7] add the database for the NANDs   Huang Shijie
• [PATCH 4/7] add GPMI support for imx23   Huang Shijie
• [PATCH 5/7] add GPMI support for imx28   Huang Shijie
• [PATCH 6/7] dmaengine: change the flags of request_irq()   Huang Shijie
• [PATCH 7/7] MTD : add GPMI driver in the config and Makefile   Huang Shijie
• [PATCH 1/7] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH 1/7] ARM: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH 6/7] dmaengine: change the flags of request_irq()   Huang Shijie
• [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH 5/7] add GPMI support for imx28   Huang Shijie
• [PATCH 2/7] add the common code for GPMI driver   Huang Shijie
• [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28   Huang Shijie-B32955
• 答复: [PATCH 6/7] dmaengine: change the flags of request_irq()   Huang Shijie-B32955
• [PATCH 2/5] ARM: gic: Add distributor and interface enable/disable accessory api   Santosh Shilimkar
• [PATCH 3/3] arm: omap4: support pmu   Santosh Shilimkar
• [patch v2 3/3] arm: omap4: support pmu   Santosh Shilimkar
• [PATCH] omap:iommu-added cache flushing operation for L2 cache   Santosh Shilimkar
• [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support   Santosh Shilimkar
• [PATCH 01/17] omap4: pm: Add omap WakeupGen module support   Santosh Shilimkar
• [PATCH 02/17] omap4: pm: Add SAR RAM support   Santosh Shilimkar
• [PATCH 03/17] omap4: Export scu base address   Santosh Shilimkar
• [PATCH 04/17] omap4: pm: Add CPUx OFF mode support   Santosh Shilimkar
• [PATCH 05/17] omap4: pm: Initialise all the clockdomains to supported states   Santosh Shilimkar
• [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes   Santosh Shilimkar
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Santosh Shilimkar
• [PATCH 10/17] omap4: pm: Add L2 cache lowpower support   Santosh Shilimkar
• [PATCH 11/17] omap4: suspend: Add MPUSS RET and OFF support   Santosh Shilimkar
• [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters   Santosh Shilimkar
• [patch v3 3/3] arm: omap4: support pmu   Santosh Shilimkar
• [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters   Santosh Shilimkar
• [PATCH 0/6] omap3: pm: Fixes for low power code   Santosh Shilimkar
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Santosh Shilimkar
• [PATCH 08/17] omap4: pm: Add GIC save/restore support   Santosh Shilimkar
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Santosh Shilimkar
• [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support   Santosh Shilimkar
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Santosh Shilimkar
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreqnotifiers   Santosh Shilimkar
• [PATCH] ARM: twd: Adjust localtimer frequency withcpufreqnotifiers   Santosh Shilimkar
• [patch v3 1/3] arm: introduce cross trigger interface helpers   Santosh Shilimkar
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Wayoperationcan cause data corruption   Santosh Shilimkar
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes   Santosh Shilimkar
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Wayoperationcancause data corruption   Santosh Shilimkar
• [PATCH 0/6] omap3: pm: Fixes for low power code   Santosh Shilimkar
• [patch v4 1/3] arm: introduce cross trigger interface helpers   Santosh Shilimkar
• [PATCH v2] OMAP4: PM: Set static dependency between MPUSS and EMIF   Santosh Shilimkar
• [GIT PULL] OMAP: L3 error handling driver for for 2.6.39   Santosh Shilimkar
• [PATCH v2 0/5] OMAP3: PM: Fixes for low power code   Santosh Shilimkar
• [PATCH v2 1/5] OMAP3: PM: Use ARMv7 supported instructions instead of legacy CP15 ones   Santosh Shilimkar
• [PATCH v2 2/5] OMAP3: PM: Fix the MMU on sequence in the asm code   Santosh Shilimkar
• [PATCH v2 3/5] OMAP3: PM: Allow the cache clean when L1 is lost.   Santosh Shilimkar
• [PATCH v2 4/5] OMAP3: PM: Remove un-necessary cp15 registers form low power cpu context   Santosh Shilimkar
• [PATCH v2 5/5] OMAP3: PM: Clear the SCTLR C bit in asm code to prevent data cache allocation   Santosh Shilimkar
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Santosh Shilimkar
• [PATCH v2 01/19] OMAP4: PM: Add omap WakeupGen module support   Santosh Shilimkar
• [PATCH v2 02/19] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit   Santosh Shilimkar
• [PATCH v2 03/19] OMAP4: PM: Export omap4_get_base*() rather than global address pointers   Santosh Shilimkar
• [PATCH v2 04/19] OMAP4: PM: Add SAR RAM support   Santosh Shilimkar
• [PATCH v2 05/19] OMAP4: PM: Add CPUX OFF mode support   Santosh Shilimkar
• [PATCH v2 06/19] OMAP4: PM: Initialise all the clockdomains to supported states   Santosh Shilimkar
• [PATCH v2 07/19] OMAP4: PM: Program CPU1 to hit OFF when off-lined   Santosh Shilimkar
• [PATCH v2 08/19] OMAP4: PM: CPU1 wakeup workaround from Low power modes   Santosh Shilimkar
• [PATCH v2 09/19] OMAP4: PM: Add GIC distributor and interface enable/disable accessory API   Santosh Shilimkar
• [PATCH v2 10/19] OMAP4: PM: Add GIC save/restore support   Santosh Shilimkar
• [PATCH v2 11/19] OMAP4: PM: Add WakeupGen save/restore support   Santosh Shilimkar
• [PATCH v2 12/19] OMAP4: PM: Add L2 cache lowpower support   Santosh Shilimkar
• [PATCH v2 13/19] OMAP4: suspend: Add MPUSS RET and OFF support   Santosh Shilimkar
• [PATCH v2 14/19] OMAP4: pm-debug: Add wakeup timer and debug counters   Santosh Shilimkar
• [PATCH v2 15/19] OMAP4: cpuidle: Basic CPUidle support   Santosh Shilimkar
• [PATCH v2 16/19] OMAP4: cpuidle: Add MPUSS RET OFF states   Santosh Shilimkar
• [PATCH v2 17/19] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states.   Santosh Shilimkar
• [PATCH v2 18/19] OMAP4: cpuidle: Add CPU hotplug notifier and prepare() hook.   Santosh Shilimkar
• [PATCH v2 19/19] OMAP4: Remove un-used do_wfi() macro.   Santosh Shilimkar
• [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1   Santosh Shilimkar
• [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1   Santosh Shilimkar
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Santosh Shilimkar
• [PATCH V3] OMAP4: PM: Set static dependency between MPUSS-EMIF and MPUSS-L3_1   Santosh Shilimkar
• [PATCH] OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0   Santosh Shilimkar
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Santosh Shilimkar
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Santosh Shilimkar
• [RFC] ARM: Cortex-A9: Enable dynamic clock gating   Santosh Shilimkar
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Santosh Shilimkar
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Santosh Shilimkar
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Santosh Shilimkar
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support.   Santosh Shilimkar
• [GIT PULL] OMAP PM updates for 2.6.39   Santosh Shilimkar
• [RFC PATCHv2 14/20] ARM: omap4: dynamically register local timersetup function   Santosh Shilimkar
• [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value   Santosh Shilimkar
• [PATCH 2/2] arm: mach-omap2: omap_l3_smx: fix irq handler setup   Santosh Shilimkar
• [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value   Santosh Shilimkar
• [RFC PATCHv2 14/20] ARM: omap4: dynamically register local timersetup function   Santosh Shilimkar
• [PATCH] ARM: EXYNOS4: Add Atmel mXT touchscreen device to the NURI board   Joonyoung Shim
• [PATCH 3/6] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip   Sergei Shtylyov
• [PATCH 4/6] ARM: s5pv310: update IRQ combiner to use EOI in parent chip   Sergei Shtylyov
• [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used   Sergei Shtylyov
• [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used   Sergei Shtylyov
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Sergei Shtylyov
• [PATCH v2 15/18] omap3+: sr: disable spamming interrupts   Sergei Shtylyov
• [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled   Sergei Shtylyov
• [patch v2 1/2] mc13892: reboot on wdi event   Sergei Shtylyov
• staging: iio: ak8975: make gpio platdata mandatory   Sergei Shtylyov
• [PATCH] Exynos4: Remove meaningless REGULATOR config option   Sergei Shtylyov
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Sergei Shtylyov
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes   Sergei Shtylyov
• [PATCH 2/2] ARM: Enable TS-78XX features in unknown revisions   Sergei Shtylyov
• [PATCH] [ARM] orion5x: fix compiler cast warnings in ts78xx-setup.c   Sergei Shtylyov
• [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage   Sergei Shtylyov
• [PATCH 2/3] ARM: tegra: harmony: register i2c devices   Sergei Shtylyov
• [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage   Sergei Shtylyov
• [PATCH v3 2/7] da850: pruss platform specific additions.   Sergei Shtylyov
• [PATCH v3 3/7] da850: pruss board specific additions.   Sergei Shtylyov
• [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The patch also adds support for the second LED that is green when off and red when on. Signed-off-by: Robin Becker <robin at reportlab.com>   Sergei Shtylyov
• [PATCH 1/3] msm: 8660: Add clock control regions to iomap   Sergei Shtylyov
• [PATCH] z2-battery: Fix count of properties   Sergei Shtylyov
• [PATCH] can : AM3517EVM : add platform specific init   Sergei Shtylyov
• [PATCH] DM644x EVM: register MUSB device earlier   Sergei Shtylyov
• [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod   Sergei Shtylyov
• [PATCH] DM644x EVM: register MUSB device earlier   Sergei Shtylyov
• [PATCH] DM644x EVM: register MUSB device earlier   Sergei Shtylyov
• [PATCH] DM644x EVM: register MUSB device earlier   Sergei Shtylyov
• [PATCH] omap3: beaglexm: fix user button.   Sergei Shtylyov
• [PATCH 15/20] video: msm: convert printk to pr_*   Sergei Shtylyov
• [PATCH 17/20] video: msm: Prevent framebuffer glitch during initialization   Sergei Shtylyov
• [PATCH 18/20] video: msm: Prevent DMA lockups when switching bit depths   Sergei Shtylyov
• [PATCH] msm: board-msm8960: Add USB peripheral and OTG support   Sergei Shtylyov
• [PATCH 3/4] davinci: da850: add support for SATA interface   Sergei Shtylyov
• [PATCH 02/13] plat-spear: use list_move() instead of list_del()/list_add() combination   Kirill A. Shutemov
• [PATCH 4/6] video i.MX: remove mx1 compile time dependencies   Baruch Siach
• [PATCH] ARM: imx/mx25: fix (again) spi device registration typo   Baruch Siach
• [PATCH] ARM: imx/mx25: dynamically allocate pwm devices   Baruch Siach
• [PATCH] mtd/mxc_nand: add support for multiple chips on V21 devices   Baruch Siach
• [PATCH] ARM: imx/mx25: add NAND chip select pins to iomux   Baruch Siach
• [PATCH] mtd/mxc_nand: add support for multiple chips on V21 devices   Baruch Siach
• [PATCH v2] i2c-pxa2xx: Add PCI support for PXA I2C controller   Sebastian Andrzej Siewior
• [PATCH 1/2] i2c-pxa2xx: Fix register offsets   Sebastian Andrzej Siewior
• Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"   Barry Song
• Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"   Barry Song
• Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"   Barry Song
• [PATCH v2 2/4] msm: iommu: Rework clock logic and add IOMMU bus clock control   Trilok Soni
• [PATCH 1/3] msm: Add support for Scorpion and ScorpionMP PMU   Trilok Soni
• [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   Trilok Soni
• [PATCH 1/2] ARM: Add TS-7800 revisions 6-9   Michael Spang
• [PATCH 2/2] ARM: Enable TS-78XX features in unknown revisions   Michael Spang
• [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions   Michael Spang
• [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions   Michael Spang
• [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode   Vishwanath Sripathy
• [PATCH] OMAP4: Intialize IVA Device in addition to DSP device.   Vishwanath Sripathy
• IRQ handler under load - slow response   Arno Steffen
• IRQ handler under load - slow response   Arno Steffen
• [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs   Alexander Stein
• [PATCH v2] plat-mxc: Provide irq_chip name for GPIO IRQs   Alexander Stein
• resend hsudc patches for s3c24xx?   Heiko Stübner
• [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC   H Hartley Sweeten
• [PATCH 2/3] ep93xx: add /proc/cpuinfo extension   H Hartley Sweeten
• Updated mach-types update   H Hartley Sweeten
• [PATCH 08/20] video: msm: Refactor mdp_regs   Brian Swetland
• [PATCH v3] ARM: EXYNOS4: add support for i2c PMICs on Universal_C210 board   Marek Szyprowski
• [PATCH v2] ARM: Samsung: change suspend/resume code to depend on CONFIG_SUSPEND   Marek Szyprowski
• [PATCH/RFC 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update   Marek Szyprowski
• [PATCH 1/7] ARM: S5PV310: Add platform definitions for FIMC   Marek Szyprowski
• [PATCH 2/7] ARM: S5PV310: power domains: fixes and code cleanup   Marek Szyprowski
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 4/7] v4l: videobuf2: add Samsung SYSMMU (IOMMU) based allocator   Marek Szyprowski
• [PATCH 5/7] s5p-fimc: add pm_runtime support   Marek Szyprowski
• [PATCH 6/7] s5p-fimc: Add support for vb2-s5p-iommu allocator   Marek Szyprowski
• [PATCH 7/7] ARM: S5PC210: enable FIMC on Universal_C210   Marek Szyprowski
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH/RFC 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update   Marek Szyprowski
• [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU   Marek Szyprowski
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH v2 0/4] S5PC210/S5PV310/EXYNOS4 interrupts update   Marek Szyprowski
• [PATCH 1/4] ARM: EXYNOS4: Add missing GPYx banks.   Marek Szyprowski
• [PATCH 2/4] ARM: Samsung: cleanup S5P gpio interrupt code   Marek Szyprowski
• [PATCH 3/4] ARM: Samsung: add function to register gpio interrupt bank data   Marek Szyprowski
• [PATCH 4/4] ARM: EXYNOS4: add support for gpio interrupts   Marek Szyprowski
• [PATCH v2] ARM: EXYNOS4: add a placeholder for board specific interrupts   Marek Szyprowski
• [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU   Marek Szyprowski
• [PATCH v6 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v7 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v8 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v8 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v2 02/13] da850: pruss platform specific additions.   TK, Pratheesh Gangadhar
• [PATCH v9 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [PATCH v9 1/1] PRUSS UIO driver support   TK, Pratheesh Gangadhar
• [RFC] kprobes with thumb2 conditional code   Tixy
• [GIT PULL] omap changes for v2.6.39 merge window   Linus Torvalds
• [GIT PULL] omap changes for v2.6.39 merge window   Linus Torvalds
• [PATCH 2/2] i.MX25: add sdma clock definitions   Michael Trimarchi
• [RFC] MMC: error handling improvements   Sahitya Tummala
• [PATCH 2/9] lpc2k: Exception vector handling   Greg Ungerer
• [PATCH 0/9] Support for NXP LPC2K SoCs   Greg Ungerer
• Support for ARM940T core Samsung S3C2510A MCU under Linux   Greg Ungerer
• Support for ARM940T core Samsung S3C2510A MCU under Linux   Greg Ungerer
• [PATCHv2] omap:mailbox: resolve hang issue   Armando Uribe
• [PATCH] audio:am3517evm support for AIC23   Abhilash K V
• [PATCH] audio : AM3517 : Adding i2c info for AIC23 codec   Abhilash K V
• [PATCH] can : AM3517EVM : add platform specific init   Abhilash K V
• [RFC PATCHv1 0/2] Export SoC info through sysfs   Eduardo Valentin
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Eduardo Valentin
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Eduardo Valentin
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Eduardo Valentin
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Eduardo Valentin
• [RFC PATCHv2 1/2] Export SoC info through sysfs   Eduardo Valentin
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c   Tomi Valkeinen
• [PATCH v3 0/3] OMAP: DSS2: Fix for DISPC core functional clock divider   Tomi Valkeinen
• [PATCH v2 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support   Tomi Valkeinen
• [PATCH 0/4] Initial patches for MSM display update   Carl Vanderlip
• [PATCH 1/4] video: msmfb: Put the partial update magic value into the fix_screen struct.   Carl Vanderlip
• [PATCH 2/4] [ARM] msm: mdp: Add support for RGBX 8888 image format.   Carl Vanderlip
• [PATCH 3/4] [ARM] msm_fb: Fix framebuffer console   Carl Vanderlip
• [PATCH 4/4] [ARM] msm: mdp: Set the correct pack pattern for XRGB/ARGB   Carl Vanderlip
• [PATCH 3/4] [ARM] msm_fb: Fix framebuffer console   Carl Vanderlip
• [PATCH 00/20] video: msm: Adding Support for MDP3.1   Carl Vanderlip
• [PATCH 01/20] video: msm: Fix typo 'mpd'->'mdp'   Carl Vanderlip
• [PATCH 02/20] video: msm: add spinlock to mdp_info struct   Carl Vanderlip
• [PATCH 03/20] video: msm: add locked_enable_mdp_irq function   Carl Vanderlip
• [PATCH 04/20] video: msm: Move clk to mdp_info struct   Carl Vanderlip
• [PATCH 05/20] video: msm: Setup framework for multiple output interfaces   Carl Vanderlip
• [PATCH 06/20] video: msm: Simplify mdp_blit function   Carl Vanderlip
• [PATCH 07/20] video: msm: Allow users to request a larger x and y virtual fb   Carl Vanderlip
• [PATCH 08/20] video: msm: Refactor mdp_regs   Carl Vanderlip
• [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code.   Carl Vanderlip
• [PATCH 10/20] video: msm: Separate more MDP HW specific code   Carl Vanderlip
• [PATCH 11/20] video: msm: Add MDP FB DMA configuration   Carl Vanderlip
• [PATCH 12/20] video: msm: Add IRQ callback for MDP interface   Carl Vanderlip
• [PATCH 13/20] video: msm: Debugging for send_blit   Carl Vanderlip
• [PATCH 14/20] video: msm: Write IRQ mask to MDP registers   Carl Vanderlip
• [PATCH 15/20] video: msm: convert printk to pr_*   Carl Vanderlip
• [PATCH 16/20] video: msm: Set the EBI1 clock to 128MHz when performing blits   Carl Vanderlip
• [PATCH 17/20] video: msm: Prevent framebuffer glitch during initialization   Carl Vanderlip
• [PATCH 18/20] video: msm: Prevent DMA lockups when switching bit depths   Carl Vanderlip
• [PATCH 19/20] video: msm: Separate calculation of base and offset   Carl Vanderlip
• [PATCH 20/20] video: msm: Add support for MDP 3.1 (qsd8k)   Carl Vanderlip
• [PATCH 17/20] video: msm: Prevent framebuffer glitch during initialization   Carl Vanderlip
• [PATCH 01/20] video: msm: Fix typo 'mpd'->'mdp'   Carl Vanderlip
• [PATCH 07/20] video: msm: Allow users to request a larger x and y virtual fb   Carl Vanderlip
• [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code.   Carl Vanderlip
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Varadarajan, Charulatha
• [PATCH 3/3] OMAP2+: powerdomain: add pwrdm_can_ever_lose_context()   Varadarajan, Charulatha
• [PATCH 3/3] OMAP2+: powerdomain: add pwrdm_can_ever_lose_context()   Varadarajan, Charulatha
• [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management   Marek Vasut
• [PATCH 3/4] ARM: PXA: PXAFB: Fix typo in ypos assignment   Marek Vasut
• [PATCH v2] z2-battery: Fix count of properties   Marek Vasut
• [PATCH 8/8] ARM: PXA: Z2: Add default triggers for LEDs   Marek Vasut
• [PATCH 7/8] ARM: PXA: Z2: Keep kbd backlight disabled by default   Marek Vasut
• [PATCH 6/8] ARM: PXA: Z2: Fix libertas init/tear down sequences   Marek Vasut
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Marek Vasut
• [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo   Marek Vasut
• [PATCH 3/8] ARM: PXA: Z2: Fix battery pdata   Marek Vasut
• [PATCH 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Marek Vasut
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Marek Vasut
• [PATCH 1/8] ARM: PXA: Z2: Use only power button as wake source   Marek Vasut
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Marek Vasut
• [PATCH 6/8] ARM: PXA: Z2: Fix libertas init/tear down sequences   Marek Vasut
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Marek Vasut
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Marek Vasut
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Marek Vasut
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Marek Vasut
• [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo   Marek Vasut
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Marek Vasut
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Marek Vasut
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Marek Vasut
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Marek Vasut
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Marek Vasut
• [PATCH 5/8] ARM: PXA: Z2: Add poweroff function   Marek Vasut
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Marek Vasut
• [PATCH v2 0/6] ARM: PXA: Z2: Zipit Z2 improvements series   Marek Vasut
• [PULL] PXA marex/devel-fix   Marek Vasut
• [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2   Marek Vasut
• [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo   Marek Vasut
• [PATCH] ARM: pxafb: Fix access to nonexistent member of pxafb_info   Marek Vasut
• [PATCH] ARM: pxafb: Fix access to nonexistent member of pxafb_info   Marek Vasut
• [PATCH][KERNEL] Add support for CPLD regs and CF cards in kernel 2.6.38   Marek Vasut
• [PATCH] msm: gpio-v2: Add missing BIT field macros for interrupt control   Rohit Vaswani
• [PATCHv2 1/3] msm: Remove arch-specific gpiomux tables   Rohit Vaswani
• [PATCHv2 2/3] msm: gpiomux: decentralize and modularize gpiomux init.   Rohit Vaswani
• [PATCHv2 3/3] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums   Rohit Vaswani
• [PATCH 1/2] msm: Add gpio support for 8960   Rohit Vaswani
• [PATCH 1/2] msm: Add gpio support for 8960   Rohit Vaswani
• [PATCH] msm: Add gpio support for 8960   Rohit Vaswani
• [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name   Andrew Victor
• Question about free_pgd_slow ?   Rabin Vincent
• Question about free_pgd_slow ?   Rabin Vincent
• Why don't we have atomic_set_mask()?   Detlef Vollmann
• Updated mach-types update   Detlef Vollmann
• Updated mach-types update   Detlef Vollmann
• [PATCH v2] z2-battery: Fix count of properties   Anton Vorontsov
• [PATCH] arm: mmci: Add ARM variant with extended FIFO   Matt Waddel
• [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver   Daniel Walker
• [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver   Daniel Walker
• [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver   Daniel Walker
• [PATCH] msm: iommu: Use relaxed register access functions   Daniel Walker
• [PATCH] msm: Add gpio support for 8960   Daniel Walker
• [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code.   Daniel Walker
• [Git pull] MSM for v2.6.39   Daniel Walker
• [PATCH] mach-ux500: activate fix for errata 753970   Linus Walleij
• [PATCH] mach-ux500: activate USB in the U8500 defconfig   Linus Walleij
• Fwd: [RFC] MMC: error handling improvements   Linus Walleij
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Linus Walleij
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Linus Walleij
• [GIT PULL] ux500,u300,nomadik core changes for 2.6.39   Linus Walleij
• [PATCH] mmci: separate out ST Micro register defines   Linus Walleij
• [PATCHv4 0/4] ARM: Fixing udelay() for SMP and non-SMP systems   Linus Walleij
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers   Linus Walleij
• [PATCH] ARM: fix compile error in tlb.h   Linus Walleij
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreqnotifiers   Linus Walleij
• [PATCH] ARM: twd: Adjust localtimer frequency withcpufreqnotifiers   Linus Walleij
• [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator   Linus Walleij
• [PATCH] plat-nomadik: make GPIO interrupts work with cpuidle ApSleep   Linus Walleij
• [PATCH 0/3] TP6105x core and regulator driver v2   Linus Walleij
• [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator v2   Linus Walleij
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Linus Walleij
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Linus Walleij
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Linus Walleij
• [RFC PATCHv1 1/2] Export SoC info through sysfs   Linus Walleij
• [RFC PATCHv2 2/2] ux500: Export U8500 SoC info through sysfs   Linus Walleij
• [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39   Linus Walleij
• [PATCH 05/10] smsc911x: use shifted register access   Linus Walleij
• [PATCH 09/10] ux500: Addressing irq header file dependency for snowball.   Linus Walleij
• [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39   Linus Walleij
• [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39   Linus Walleij
• [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39   Linus Walleij
• [PATCH 1/4] amba: add name based matching   Linus Walleij
• [PATCH 1/4] amba: add name based matching   Linus Walleij
• [PATCH] arm: mmci: Add ARM variant with extended FIFO   Linus Walleij
• [PATCH 1/4] amba: add name based matching   Linus Walleij
• [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator v2   Linus Walleij
• Booting Integrator/AP with ARM920T   Linus Walleij
• [PATCH] mmci: separate out ST Micro register defines   Linus Walleij
• [PATCH 0/6] use AMBA periphid for hardcoding   Linus Walleij
• [PATCH 1/6] mach-netx: delete hardcoded periphid   Linus Walleij
• [PATCH 2/6] mach-ux500: delete SSP PrimeCell ID   Linus Walleij
• [PATCH 3/6] amba: make hardcoded periphid override hardware   Linus Walleij
• [PATCH 4/6] mach-ux500: force PrimeCell revisions   Linus Walleij
• [PATCH 5/6] spi/pl022: Add loopback support for the SPI on 5500   Linus Walleij
• [PATCH 6/6] mmci: support for ST-Ericsson db8500v2   Linus Walleij
• [PATCH 0/2] OMAP3: cpuidle: prevent CORE pwrdm from entering low-power state when DSS active   Paul Walmsley
• [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on   Paul Walmsley
• [PATCH 2/2] OMAP3: cpuidle: add more details to the DSS-related CORE power domain state restriction   Paul Walmsley
• [PATCH 0/3] OMAP2+ hwmod fixes   Paul Walmsley
• [PATCH] OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interface   Paul Walmsley
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods   Paul Walmsley
• [PATCH] OMAP2+: hwmod: use status bit info for reset line   Paul Walmsley
• [PATCH] OMAP1: McBSP: fix build break for non-multi-OMAP1 configs   Paul Walmsley
• [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode   Paul Walmsley
• [PATCH 0/3] OMAP2+: powerdomain: add fn to determine whether pwrdm is always on   Paul Walmsley
• [PATCH 1/3] OMAP2/3: WKUP powerdomain: mark as being always on   Paul Walmsley
• [PATCH 2/3] OMAP2+: powerdomain: fix bank power state bitfields   Paul Walmsley
• [PATCH 3/3] OMAP2+: powerdomain: add pwrdm_can_ever_lose_context()   Paul Walmsley
• [PATCH] OMAP1: McBSP: fix build break for non-multi-OMAP1 configs   Paul Walmsley
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx   Paul Walmsley
• [PATCH 0/5] OMAP2+: hwmod: miscellaneous fixes for 2.6.39   Paul Walmsley
• [PATCH 1/5] OMAP2+: hwmod: fix incorrect computation of autoidle_mask   Paul Walmsley
• [PATCH 2/5] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods   Paul Walmsley
• [PATCH 3/5] OMAP2+: hwmod: Fix what _init_clock returns   Paul Walmsley
• [PATCH 4/5] OMAP2+: hwmod: fix a documentation bug with HWMOD_NO_OCP_AUTOIDLE   Paul Walmsley
• [PATCH 5/5] OMAP2+: hwmod: use status bit info for reset line   Paul Walmsley
• [PATCH 3/3] OMAP2+: powerdomain: add pwrdm_can_ever_lose_context()   Paul Walmsley
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Paul Walmsley
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads   Paul Walmsley
• [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode   Paul Walmsley
• [PATCH 2 01/18] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c   Paul Walmsley
• [PATCH] OMAP2+: clockdomain: add flag that will block autodeps from being added for a clockdomain   Paul Walmsley
• [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on   Paul Walmsley
• [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver   Paul Walmsley
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Paul Walmsley
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Paul Walmsley
• [PATCH] perf: add OMAP support for the new power events   Paul Walmsley
• [PATCH] OMAP2+: hwmod: allow board files to prevent devices from being reset upon init   Paul Walmsley
• [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1   Paul Walmsley
• [PATCH] OMAP3: hwmod: remove incorrect SmartReflex -> L4 CORE interconnect links   Paul Walmsley
• [PATCH 2/2] OMAP: PM: implement devices constraints APIs   Paul Walmsley
• [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1   Paul Walmsley
• [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM   Paul Walmsley
• [PATCH] OMAP2+: clockdomain: add flag that will block autodeps from being added for a clockdomain   Paul Walmsley
• [PATCH 1/3] OMAP2+: PM: omap device: API's for handling mstandby mode   Paul Walmsley
• [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on   Paul Walmsley
• [PATCHv2] omap2/3: dmtimer: Enable autoidle   Paul Walmsley
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Paul Walmsley
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Paul Walmsley
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Paul Walmsley
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Paul Walmsley
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence   Paul Walmsley
• [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1   Paul Walmsley
• [GIT PULL] OMAP: core/clock: patches for 2.6.39   Paul Walmsley
• [PATCH] OMAP2+: voltage: don't build voltage layer when !CONFIG_PM   Paul Walmsley
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• MMC quirks relating to performance/lifetime.   Andrei Warkentin
• Single-stepping ARMv7 with KDB...   Andrei Warkentin
• Single-stepping ARMv7 with KDB...   Andrei Warkentin
• Single-stepping ARMv7 with KDB...   Andrei Warkentin
• Tegra ASoC board patches for 2.6.39   Stephen Warren
• [PATCH 0/5] ARM: Tegra: Enable audio (boards-for-next-i2c)   Stephen Warren
• [PATCH 1/5] ARM: Tegra: Add devices.c entries for audio   Stephen Warren
• [PATCH 2/5] ARM: Tegra: Create defines for SD-related GPIO names   Stephen Warren
• [PATCH 3/5] ARM: tegra: Harmony: Beginnings of audio support   Stephen Warren
• [PATCH 4/5] ARM: tegra: Harmony: I2C-related portions of audio support   Stephen Warren
• [PATCH 5/5] ARM: tegra: Harmony: Set WM8903 gpio_base   Stephen Warren
• [PATCH 0/3] ARM: Tegra: Enable audio (boards-for-next)   Stephen Warren
• [PATCH 1/3] ARM: Tegra: Add devices.c entries for audio   Stephen Warren
• [PATCH 2/3] ARM: Tegra: Create defines for SD-related GPIO names   Stephen Warren
• [PATCH 3/3] ARM: tegra: Harmony: Beginnings of audio support   Stephen Warren
• [PATCH 1/3] ARM: tegra: seaboard: register i2c devices   Stephen Warren
• [PATCH 2/3] ARM: tegra: harmony: register i2c devices   Stephen Warren
• [PATCH 3/3] ARM: tegra: enable new drivers in defconfig   Stephen Warren
• [PATCH] ARM: tegra: trimslice: enable MMC/SD slots   Stephen Warren
• [PATCH 3/3] ARM: tegra: enable new drivers in defconfig   Stephen Warren
• [PATCH 1/3] ARM: tegra: seaboard: register i2c devices   Stephen Warren
• [PATCH v2] ARM: tegra: seaboard: register i2c devices   Stephen Warren
• [PATCH] ARM: tegra: harmony: Register and configure WM8903 IRQ GPIO   Stephen Warren
• [PATCH] ARM: mxs/tx28: fix up LCD pads   Lothar Waßmann
• [PATCH] ARM: mxs/tx28: fix up LCD pads   Lothar Waßmann
• [PATCH 1/7] ARM: add GPMI support for imx23/imx28   Lothar Waßmann
• [PATCH 6/7] dmaengine: change the flags of request_irq()   Lothar Waßmann
• [PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51   Lothar Waßmann
• [PATCH 1/7] ARM: add GPMI support for imx23/imx28   Lothar Waßmann
• Enable UART3 on TX28   Lothar Waßmann
• [PATCH] ARM: mxs Enable UART3 on TX28   Lothar Waßmann
• [PATCH] ARM: mxs: Enable SPI-GPIO support on TX28   Lothar Waßmann
• [PATCH] ARM: mxs: TX28: Change pwm backlight max_brightness to 100   Lothar Waßmann
• [PATCH] ARM: mxs: TX28: Add support for first Flexcan port on STK5-V3 base board and second Flexcan port on STK5-V4   Lothar Waßmann
• Enable UART3 on TX28   Lothar Waßmann
• [PATCH 1/2] ARM: mxs: configure and register the second FEC device on TX28/STK5-V4   Lothar Waßmann
• [PATCH 2/2] ARM: mxs: TX28: Setup MAC addresses for both FEC MACs from OTP fuses.   Lothar Waßmann
• [PATCH 5/7] add GPMI support for imx28   Lothar Waßmann
• [PATCH 2/2] ARM: mxs: TX28: Setup MAC addresses for both FEC MACs from OTP fuses.   Lothar Waßmann
• [PATCH 5/7] add GPMI support for imx28   Lothar Waßmann
• [PATCH 1/2] ARM: mxc: Add dummy_get_cycles to avoid access before init is done   Jan Weitzel
• [PATCH 2/2] ARM: mxc: Add sched_clock to mxc platform   Jan Weitzel
• [PATCH 1/4] ARM i.MX: remove duplicated #include   Huang Weiyi
• [PATCH 2/4] ARM: S5P: remove duplicated #include   Huang Weiyi
• [PATCH 0/9] Support for NXP LPC2K SoCs   Kevin Wells
• [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board   Kevin Wells
• [PATCH 1/9] lpc2k: Core support   Kevin Wells
• [PATCH 3/9] lpc2k: clk API   Kevin Wells
• [PATCH 3/9] lpc2k: clk API   Kevin Wells
• [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board   Kevin Wells
• [PATCH v2 4/9] lpc2k: generic time and clockevents   Kevin Wells
• [PATCH v2 6/9] lpc2k: multifunction pin configuration   Kevin Wells
• [PATCH v3 3/9] lpc2k: clk API   Kevin Wells
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [PATCH V5 6/6] pxa3xx_nand: clean the keep configure code   Lei Wen
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [Q] Booting kernel from NFS?   Chen Wenjie
• [PATCH 1/2] davinci: mityomapl138: Use correct id for NAND controller   Michael Williamson
• [PATCH 2/2] davinci: mityomapl138: Use auto-probe to determine attached PHY ID   Michael Williamson
• [PATCH 1/9] lpc2k: Core support   Vitaly Wool
• [PATCH 1/2] ARM: fix compiling error due to debug_info change   Bryan Wu
• [PATCH] ARM: fix compiling error due to debug_info change   Bryan Wu
• [PATCH 1/2] ARM: fix compiling error due to debug_info change   Bryan Wu
• [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump   Bryan Wu
• [PATCH] ARM: fix compiling error due to debug_info change   Bryan Wu
• [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump   Bryan Wu
• [PATCH] ARM: Use asm-generic/sizes.h   Guan Xuetao
• [PATCH] ARM: Use asm-generic/sizes.h   Guan Xuetao
• [PATCH] ARM: Use asm-generic/sizes.h   Guan Xuetao
• [PATCH] ARM: S5PV210: Fix security engine interrupt names   Vladimir Zapolskiy
• [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums   Dima Zavin
• [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code.   Dima Zavin
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice   Richard Zhao
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [PATCH 2/2] ARM: imx3x: clean up ARCH_MX3X   Richard Zhao
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X   Richard Zhao
• [PATCH v3] ARM: mx51: Print silicon revision on boot   Richard Zhao
• [PATCH V4 1/4] ARM: imx53_loco: add esdhc device support   Richard Zhu
• [PATCH V4 2/4] ARM: imx51/53: add sdhc3/4 clock   Richard Zhu
• [PATCH V4 3/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V4 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH V5 1/6] ARM: imx51/53: add sdhc3/4 clock   Richard Zhu
• [PATCH V5 2/6] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V5 3/6] mmc: add the abort CMDTYE bits definition   Richard Zhu
• [PATCH V5 4/6] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Richard Zhu
• [PATCH V5 5/6] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH V5 6/6] ARM: imx53_loco: add esdhc device support   Richard Zhu
• [PATCH V6 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V6 2/4] mmc: add the abort CMDTYE bits definition   Richard Zhu
• [PATCH V6 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Richard Zhu
• [PATCH V6 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards.   Richard Zhu
• [RFC 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Richard Zhu
• [RFC 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Richard Zhu
• [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Richard Zhu
• [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Richard Zhu
• [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Richard Zhu
• [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Richard Zhu
• [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards.   Richard Zhu
• [PATCH V6 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V6 2/4] mmc: add the abort CMDTYE bits definition   Richard Zhu
• [PATCH V6 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Richard Zhu
• [PATCH V6 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH V1 1/3] ahci_platform: add two clk pointer member into ahci_platform_data struct   Richard Zhu
• [PATCH V1 2/3] AHCI Add the AHCI SATA feature on MX53 platforms   Richard Zhu
• [PATCH V1 3/3] MX53 Enable the AHCI SATA on MX53 LOCO   Richard Zhu
• [PATCH V2 1/2] AHCI Add the AHCI SATA feature on MX53 platforms   Richard Zhu
• [PATCH V2 2/2] MX53 Enable the AHCI SATA on MX53 LOCO   Richard Zhu
• [PATCH V7 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V7 2/4] mmc: add the abort CMDTYE bits definition   Richard Zhu
• [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Richard Zhu
• [PATCH V7 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH V7 0/4] mmc: one comment is missing addressed in the previous review.   Richard Zhu
• [PATCH V7 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V7 2/4] mmc: add the abort CMDTYE bits definition   Richard Zhu
• [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Richard Zhu
• [PATCH V7 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [PATCH V7 0/4] mmc: one comment is missing addressed.   Richard Zhu
• [PATCH V7 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS   Richard Zhu
• [PATCH V7 2/4] mmc: add the abort CMDTYE bits definition   Richard Zhu
• [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs   Richard Zhu
• [PATCH V7 4/4] mmc: sdhci-esdhc: enable esdhc on imx53   Richard Zhu
• [RFC PATCH 00/20] A15 architected timer support   Marc Zyngier
• [RFC PATCH 01/20] ARM: architected timers: move local timer support to percpu_timer.c   Marc Zyngier
• [RFC PATCH 02/20] ARM: omap2: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 03/20] ARM: exynos4: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 04/20] ARM: shmobile: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 05/20] ARM: tegra: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 06/20] ARM: ux500: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 07/20] ARM: versatile: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCH 08/20] ARM: remove unused twd_timer_setup stub   Marc Zyngier
• [RFC PATCH 09/20] ARM: architected timers: add A15 architected timers   Marc Zyngier
• [RFC PATCH 10/20] ARM: Platform dependent sched_clock() override   Marc Zyngier
• [RFC PATCH 11/20] ARM: architected timers: Add A15 specific sched_clock implementation   Marc Zyngier
• [RFC PATCH 12/20] ARM: versatile/vexpress: rework timer support   Marc Zyngier
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 14/20] ARM: omap4: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 15/20] ARM: exynos4: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 16/20] ARM: shmobile: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 17/20] ARM: tegra: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 18/20] ARM: ux500: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 19/20] ARM: simplify percpu_timer_setup   Marc Zyngier
• [RFC PATCH 20/20] ARM: simplify percpu_timer_ack   Marc Zyngier
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCHv2 00/20] A15 architected timer support   Marc Zyngier
• [RFC PATCHv2 01/20] ARM: architected timers: move local timer support to percpu_timer.c   Marc Zyngier
• [RFC PATCHv2 02/20] ARM: omap2: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCHv2 03/20] ARM: exynos4: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCHv2 04/20] ARM: shmobile: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCHv2 05/20] ARM: tegra: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCHv2 06/20] ARM: ux500: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCHv2 07/20] ARM: versatile: remove stubbed twd_timer_setup call   Marc Zyngier
• [RFC PATCHv2 08/20] ARM: remove unused twd_timer_setup stub   Marc Zyngier
• [RFC PATCHv2 09/20] ARM: architected timers: add A15 architected timers   Marc Zyngier
• [RFC PATCHv2 10/20] ARM: Platform dependent sched_clock() override   Marc Zyngier
• [RFC PATCHv2 11/20] ARM: architected timers: Add A15 specific sched_clock implementation   Marc Zyngier
• [RFC PATCHv2 12/20] ARM: versatile/vexpress: rework timer support   Marc Zyngier
• [RFC PATCHv2 13/20] ARM: msm: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCHv2 14/20] ARM: omap4: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCHv2 15/20] ARM: exynos4: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCHv2 16/20] ARM: shmobile: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCHv2 17/20] ARM: tegra: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCHv2 18/20] ARM: ux500: dynamically register local timer setup function   Marc Zyngier
• [RFC PATCHv2 19/20] ARM: simplify percpu_timer_setup   Marc Zyngier
• [RFC PATCHv2 20/20] ARM: simplify percpu_timer_ack   Marc Zyngier
• [RFC PATCHv2 14/20] ARM: omap4: dynamically register local timersetup function   Marc Zyngier
• [PATCH v4 0/7] Switch ARM platforms from integrator-flash to physmap   Marc Zyngier
• [PATCH v4 1/7] MTD: Add integrator-flash feature to physmap   Marc Zyngier
• [PATCH v4 2/7] ARM: Realview: Use physmap driver instead of integrator-flash   Marc Zyngier
• [PATCH v4 3/7] ARM: Versatile: Use physmap driver instead of integrator-flash   Marc Zyngier
• [PATCH v4 4/7] ARM: VExpress: Use physmap driver instead of integrator-flash   Marc Zyngier
• [PATCH v4 5/7] ARM: Integrator/AP: Use physmap driver instead of integrator-flash   Marc Zyngier
• [PATCH v4 6/7] ARM: Integrator/CP: Use physmap driver instead of integrator-flash   Marc Zyngier
• [PATCH v4 7/7] MTD: Remove integrator-flash   Marc Zyngier
• Compiling a kernel for armv5 + armv6   saeed bishara
• SMP soft lockup on smp_call_function_many when doing flush_tlb_page   saeed bishara
• SMP soft lockup on smp_call_function_many when doing flush_tlb_page   saeed bishara
• SMP soft lockup on smp_call_function_many when doing flush_tlb_page   saeed bishara
• [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The pat   saeed bishara
• SMP soft lockup on smp_call_function_many when doing flush_tlb_page   saeed bishara
• [Qualcomm PM8921 MFD 0/6] *** SUBJECT HERE ***   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 6/6] msm: board-8960: Add support for pm8921   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD 0/6] pmic 8921 core and subdevices   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD v2 0/6] pmic 8921 core and subdevices   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD v2 1/6] mfd: pm8921: Add PMIC 8921 core driver   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD v2 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem   adharmap at codeaurora.org
• [Qualcomm PM8921 MFD v2 6/6] msm: board-8960: Add support for pm8921   adharmap at codeaurora.org
• [PM8921 MFD V3 0/6] pmic8921 core and subdevices   adharmap at codeaurora.org
• [PM8921 MFD V3 1/6] mfd: pm8921: Add PMIC 8921 core driver   adharmap at codeaurora.org
• [PM8921 MFD V3 2/6] mfd: pm8xxx: Add irq support   adharmap at codeaurora.org
• [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   adharmap at codeaurora.org
• [PM8921 MFD V3 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   adharmap at codeaurora.org
• [PM8921 MFD V3 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem   adharmap at codeaurora.org
• [PM8921 MFD V3 6/6] msm: board-8960: Add support for pm8921   adharmap at codeaurora.org
• [PM8921 MFD V4 6/6] msm: board-8960: Add support for pm8921   adharmap at codeaurora.org
• CHROMIUM: arm: tegra: Add platfrom devices for Cypress trackpad (issue6623011)   dudl at cypress.com
• [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   daeinki
• [PATCH] MX51: Add AUDMUX ports definitions   julien.boibessot at free.fr
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51.   Dinh.Nguyen at freescale.com
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   Dinh.Nguyen at freescale.com
• [PATCHv2 2/2] ARM: mx51: Add support for low power suspend on MX51   Dinh.Nguyen at freescale.com
• [PATCHv3 1/3] ARM: mx51: Add entry for gpc_dvfs_clk   Dinh.Nguyen at freescale.com
• [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI   Dinh.Nguyen at freescale.com
• [PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51   Dinh.Nguyen at freescale.com
• [PATCHv4 1/3] ARM: mx51: Add entry for gpc_dvfs_clk   Dinh.Nguyen at freescale.com
• [PATCHv4 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI   Dinh.Nguyen at freescale.com
• [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51   Dinh.Nguyen at freescale.com
• [PATCHv5 1/4] ARM: mx50: Add support to get the silicon revision   Dinh.Nguyen at freescale.com
• [PATCHv5 2/4] ARM: mx51: Add entry for gpc_dvfs_clk   Dinh.Nguyen at freescale.com
• [PATCHv5 3/4] ARM: mx51: Implement code to allow mx51 to enter WFI   Dinh.Nguyen at freescale.com
• [PATCHv5 4/4] ARM: mx51: Add support for low power suspend on MX51   Dinh.Nguyen at freescale.com
• [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name   avictor.za at gmail.com
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data   avictor.za at gmail.com
• [PATCH 0/3] arm: support pmu irq routed from CTI   tom.leiming at gmail.com
• [PATCH 1/3] arm: introduce cross trigger interface helpers   tom.leiming at gmail.com
• [PATCH 2/3] arm: pmu: support pmu irq routed from CTI   tom.leiming at gmail.com
• [PATCH 3/3] arm: omap4: support pmu   tom.leiming at gmail.com
• [patch v1 0/3] arm: support pmu irq routed from CTI   tom.leiming at gmail.com
• [patch v1 1/3] arm: introduce cross trigger interface helpers   tom.leiming at gmail.com
• [patch v1 2/3] arm: pmu: support pmu irq routed from CTI   tom.leiming at gmail.com
• [patch v1 3/3] arm: omap4: support pmu   tom.leiming at gmail.com
• [patch v2 0/3] arm: pmu: support pmu/perf on OMAP4   tom.leiming at gmail.com
• [patch v2 1/3] arm: introduce cross trigger interface helpers   tom.leiming at gmail.com
• [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling   tom.leiming at gmail.com
• [patch v2 3/3] arm: omap4: support pmu   tom.leiming at gmail.com
• [PATCH] arm: etm: fix section mismatch warning   tom.leiming at gmail.com
• [PATCH] arm: omap: fix section mismatch warning   tom.leiming at gmail.com
• [patch v3 0/3] arm: pmu: support pmu/perf on OMAP4   tom.leiming at gmail.com
• [patch v3 1/3] arm: introduce cross trigger interface helpers   tom.leiming at gmail.com
• [patch v3 2/3] arm: pmu: allow platform specific irq enable/disable handling   tom.leiming at gmail.com
• [patch v3 3/3] arm: omap4: support pmu   tom.leiming at gmail.com
• [patch v4 0/3] arm: pmu: support pmu/perf on OMAP4   tom.leiming at gmail.com
• [patch v4 1/3] arm: introduce cross trigger interface helpers   tom.leiming at gmail.com
• [patch v4 2/3] arm: pmu: allow platform specific irq enable/disable handling   tom.leiming at gmail.com
• [patch v4 3/3] arm: omap4: support pmu   tom.leiming at gmail.com
• [PATCH 16/20] video: msm: Set the EBI1 clock to 128MHz when performing blits   zt.tmzt at gmail.com
• [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support.   shiraz hashim
• questions about arm trustzone   shiraz hashim
• [PATCH] msm: board-msm8960: Add USB peripheral and OTG support   Anji jonnala
• Questions about this patch: [PATCH] ARM: Use generic BUG() handler   anish kumar
• [RFC] device.h: add device_set_platdata routine   viresh kumar
• [RFC] device.h: add device_set_platdata routine   viresh kumar
• [PATCH V5 00/63] Updating SPEAr Support   viresh kumar
• [PATCH 0/8 resend] dw_dmac: Extending support & minor fixes   viresh kumar
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32   viresh kumar
• [PATCH 4/8 resend] dw_dmac: calling dwc_scan_descriptors from dwc_tx_status() after taking lock   viresh kumar
• [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish   viresh kumar
• [PATCH 7/8 resend] dw_dmac.c: Pass Channel Allocation Order from platform_data   viresh kumar
• [PATCH 8/8 resend] dw_dmac.c: Pass Channel Priority from platform_data   viresh kumar
• [PATCH V2 06/13] dw_dmac: Change value of DWC_MAX_COUNT to 4095.   viresh kumar
• [PATCH V2 11/13] dw_dmac: Allow src/dst msize & flow controller to be configured at runtime   viresh kumar
• [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes   viresh kumar
• [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes   viresh kumar
• [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes   viresh kumar
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32   viresh kumar
• [PATCH V6 7/8] ST SPEAr: Remove unused *_SIZE macros from spear*.h files   viresh kumar
• [PATCH V6 00/11] SPEAr3xx & SPEAr6xx: Single Image solution and padmux updates   viresh kumar
• [PATCH 02/13] plat-spear: use list_move() instead of list_del()/list_add() combination   viresh kumar
• [PATCH 00/10] ux500: support for snowball board.   mathieu.poirier at linaro.org
• [PATCH 01/10] ux500: Introducing foundation for snowball board.   mathieu.poirier at linaro.org
• [PATCH 02/10] ux500: Adding new board files for snowball.   mathieu.poirier at linaro.org
• [PATCH 03/10] ux500: Adding custom pin configuration file for snowball. - Adding dependency in Makefile. - Adding init function call to board-snowball.c - New header file.   mathieu.poirier at linaro.org
• [PATCH 04/10] ux500: Adding sdi support on snowball.   mathieu.poirier at linaro.org
• [PATCH 05/10] smsc911x: use shifted register access   mathieu.poirier at linaro.org
• [PATCH 06/10] ux500: added snowball-netev with latest fixes   mathieu.poirier at linaro.org
• [PATCH 07/10] ux500: added snowball-digio.c   mathieu.poirier at linaro.org
• [PATCH 08/10] ux500: hooking up netdev and digio to compilation.   mathieu.poirier at linaro.org
• [PATCH 09/10] ux500: Addressing irq header file dependency for snowball.   mathieu.poirier at linaro.org
• [PATCH 10/10] ux500: adding config file options for snowball board.   mathieu.poirier at linaro.org
• [PATCH 0/2] OMAP3: cpuidle: prevent CORE pwrdm from entering low-power state when DSS active   Tero.Kristo at nokia.com
• [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on   Tero.Kristo at nokia.com
• [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on   Tero.Kristo at nokia.com
• Recall: [PATCH 1/2] ARM imx53: add pwm devices support   s.hauer at pengutronix.de
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   s.hauer at pengutronix.de
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI   s.hauer at pengutronix.de
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers   martin persson
• [PATCH V5 Resend] ST SPEAr: PCIE gadget suppport   pratyush
• [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support.   pratyush
• Question about free_pgd_slow ?   rocky
• Question about free_pgd_slow ?   rocky
• [PATCH] omap2+: mux: Remove the use of IDLE flag.   sricharan
• [PATCH V4 2/5] omap4: board-4430sdp: Initialise the serial pads.   sricharan
• [PATCH V4 3/5] omap3: board-3430sdp: Initialise the serial pads.   sricharan
• [PATCH V4 4/5] omap4: board-omap4panda: Initialise the serial pads.   sricharan
• clcdfb: Question about clcdfb_check() routine   vksamar
• compiling 2.6.37 kernel in THUMB2 mode   vb at vsbe.com
• compiling 2.6.37 kernel in THUMB2 mode   vb at vsbe.com
• compiling 2.6.37 kernel in THUMB2 mode   vb at vsbe.com
• compiling 2.6.37 kernel in THUMB2 mode   vb at vsbe.com