[PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx

[Kevin Hilman]

Paul Walmsley <paul at pwsan.com> writes:

> Hello,
>
> This patch series adds clock framework-controlled autoidle support for
> the OMAP2xxx DPLL, APLLs, and OMAP2/3 interface clocks.  The old
> direct register writes in the PM code to enable clock autoidle have been
> removed.  
>
> This series also ensures that all clock autoidle is disabled during
> boot and only re-enabled if CONFIG_PM is enabled.
>
> The series applies on the 'clk_autoidle_a_2.6.39' branch of
> git://git.pwsan.com/linux-2.6.
>
> Boot-tested on N800, and dynamic idle-tested on OMAP3430 Beagleboard.
> Compile-tested with omap1_defconfig, omap2plus_defconfig, a 5912
> OSK-only config, an N8x0-only config, an OMAP3-only config, and an OMAP4-only
> config.

Reviewed-by: Kevin Hilman <khilman at ti.com>

Feel free to merge the various pm*.c changes via your tree.

Kevin