[PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx

[Paul Walmsley]

On Tue, 1 Mar 2011, Kevin Hilman wrote:

> Paul Walmsley <paul at pwsan.com> writes:
> 
> > This patch series adds clock framework-controlled autoidle support for
> > the OMAP2xxx DPLL, APLLs, and OMAP2/3 interface clocks.  The old
> > direct register writes in the PM code to enable clock autoidle have been
> > removed.  
> >
> > This series also ensures that all clock autoidle is disabled during
> > boot and only re-enabled if CONFIG_PM is enabled.
> >
> > The series applies on the 'clk_autoidle_a_2.6.39' branch of
> > git://git.pwsan.com/linux-2.6.
> >
> > Boot-tested on N800, and dynamic idle-tested on OMAP3430 Beagleboard.
> > Compile-tested with omap1_defconfig, omap2plus_defconfig, a 5912
> > OSK-only config, an N8x0-only config, an OMAP3-only config, and an OMAP4-only
> > config.
> 
> Reviewed-by: Kevin Hilman <khilman at ti.com>

Thanks, added your Reviewed-by: on these.

> Feel free to merge the various pm*.c changes via your tree.


- Paul