[PATCHv2 3/4] mach-mx31_3ds: Add support for framebuffer and LCD

Marc Kleine-Budde mkl at pengutronix.de
Mon Mar 7 05:21:40 EST 2011


On 03/07/2011 11:12 AM, Alberto Panizzo wrote:
> 
> 
> Signed-off-by: Alberto Panizzo <alberto at amarulasolutions.com>
> ---
>  arch/arm/mach-mx3/mach-mx31_3ds.c |  130 +++++++++++++++++++++++++++++++++++++
>  1 files changed, 130 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
> index cff9206..bb7e432 100644
> --- a/arch/arm/mach-mx3/mach-mx31_3ds.c
> +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
> @@ -21,6 +21,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/mfd/mc13783.h>
>  #include <linux/spi/spi.h>
> +#include <linux/spi/l4f00242t03.h>
>  #include <linux/regulator/machine.h>
>  #include <linux/usb/otg.h>
>  #include <linux/usb/ulpi.h>
> @@ -36,6 +37,8 @@
>  #include <mach/3ds_debugboard.h>
>  #include <mach/ulpi.h>
>  #include <mach/mmc.h>
> +#include <mach/ipu.h>
> +#include <mach/mx3fb.h>
>  
>  #include "devices-imx31.h"
>  #include "devices.h"
> @@ -50,6 +53,12 @@ static int mx31_3ds_pins[] = {
>  	MX31_PIN_TXD1__TXD1,
>  	MX31_PIN_RXD1__RXD1,
>  	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
> +	/*SPI0*/
> +	MX31_PIN_CSPI1_SCLK__SCLK,
> +	MX31_PIN_CSPI1_MOSI__MOSI,
> +	MX31_PIN_CSPI1_MISO__MISO,
> +	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
> +	MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
>  	/* SPI 1 */
>  	MX31_PIN_CSPI2_SCLK__SCLK,
>  	MX31_PIN_CSPI2_MOSI__MOSI,
> @@ -109,6 +118,70 @@ static int mx31_3ds_pins[] = {
>  	MX31_PIN_SD1_CMD__SD1_CMD,
>  	MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
>  	MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
> +	/* Framebuffer */
> +	MX31_PIN_LD0__LD0,
> +	MX31_PIN_LD1__LD1,
> +	MX31_PIN_LD2__LD2,
> +	MX31_PIN_LD3__LD3,
> +	MX31_PIN_LD4__LD4,
> +	MX31_PIN_LD5__LD5,
> +	MX31_PIN_LD6__LD6,
> +	MX31_PIN_LD7__LD7,
> +	MX31_PIN_LD8__LD8,
> +	MX31_PIN_LD9__LD9,
> +	MX31_PIN_LD10__LD10,
> +	MX31_PIN_LD11__LD11,
> +	MX31_PIN_LD12__LD12,
> +	MX31_PIN_LD13__LD13,
> +	MX31_PIN_LD14__LD14,
> +	MX31_PIN_LD15__LD15,
> +	MX31_PIN_LD16__LD16,
> +	MX31_PIN_LD17__LD17,
> +	MX31_PIN_VSYNC3__VSYNC3,
> +	MX31_PIN_HSYNC__HSYNC,
> +	MX31_PIN_FPSHIFT__FPSHIFT,
> +	MX31_PIN_CONTRAST__CONTRAST,
> +};
> +
> +/*
> + * FB support
> + */
> +static const struct fb_videomode fb_modedb[] = {
> +	{	/* 480x640 @ 60 Hz */
> +		.name		= "Epson-VGA",
> +		.refresh	= 60,
> +		.xres		= 480,
> +		.yres		= 640,
> +		.pixclock	= 41701,
> +		.left_margin	= 20,
> +		.right_margin	= 41,
> +		.upper_margin	= 10,
> +		.lower_margin	= 5,
> +		.hsync_len	= 20,
> +		.vsync_len	= 10,
> +		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
> +		.vmode		= FB_VMODE_NONINTERLACED,
> +		.flag		= 0,
> +	},
> +};
> +
> +static struct ipu_platform_data mx3_ipu_data = {
> +	.irq_base = MXC_IPU_IRQ_START,
> +};
> +
> +static struct mx3fb_platform_data mx3fb_pdata = {
> +	.dma_dev	= &mx3_ipu.dev,
> +	.name		= "Epson-VGA",
> +	.mode		= fb_modedb,
> +	.num_modes	= ARRAY_SIZE(fb_modedb),
> +};
> +
> +/* LCD */
> +static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
> +	.reset_gpio =		IOMUX_TO_GPIO(MX31_PIN_LCS1),
> +	.data_enable_gpio =	IOMUX_TO_GPIO(MX31_PIN_SER_RS),
> +	.core_supply =		"lcd_2v8",
> +	.io_supply =		"vdd_lcdio",

please make the indention around the "=" consistent.

>  };
>  
>  /*
> @@ -232,6 +305,38 @@ static struct regulator_init_data vmmc2_init = {
>  	.consumer_supplies = vmmc2_consumers,
>  };
>  
> +static struct regulator_consumer_supply vmmc1_consumers[] = {
> +	REGULATOR_SUPPLY("lcd_2v8", NULL),
> +};
> +
> +static struct regulator_init_data vmmc1_init = {
> +	.constraints = {
> +		.min_uV = 2800000,
> +		.max_uV = 2800000,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
> +				  REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
> +	.consumer_supplies = vmmc1_consumers,
> +};
> +
> +static struct regulator_consumer_supply vgen_consumers[] = {
> +	REGULATOR_SUPPLY("vdd_lcdio", NULL),
> +};
> +
> +static struct regulator_init_data vgen_init = {
> +	.constraints = {
> +		.min_uV = 1800000,
> +		.max_uV = 1800000,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
> +				  REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
> +	.consumer_supplies = vgen_consumers,
> +};
> +
>  static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
>  	{
>  		.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
> @@ -249,6 +354,12 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
>  	}, {
>  		.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
>  		.init_data = &vmmc2_init,
> +	}, {
> +		.id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
> +		.init_data = &vmmc1_init,
> +	}, {
> +		.id = MC13783_REG_VGEN,  /* Power LCD */
> +		.init_data = &vgen_init,
>  	},
>  };
>  
> @@ -260,6 +371,15 @@ static struct mc13xxx_platform_data mc13783_pdata __initdata = {
>  };
>  
>  /* SPI */
> +static int spi0_internal_chipselect[] = {
> +	MXC_SPI_CS(2),
> +};
> +
> +static const struct spi_imx_master spi0_pdata __initconst = {
> +	.chipselect	= spi0_internal_chipselect,
> +	.num_chipselect	= ARRAY_SIZE(spi0_internal_chipselect),
> +};
> +
>  static int spi1_internal_chipselect[] = {
>  	MXC_SPI_CS(0),
>  	MXC_SPI_CS(2),
> @@ -279,6 +399,12 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
>  		.platform_data	= &mc13783_pdata,
>  		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
>  		.mode = SPI_CS_HIGH,
> +	}, {
> +		.modalias	= "l4f00242t03",
> +		.max_speed_hz	= 5000000,
> +		.bus_num	= 0,
> +		.chip_select	= 0, /* SS2 */
> +		.platform_data	= &mx31_3ds_l4f00242t03_pdata,
>  	},
>  };
>  
> @@ -461,6 +587,10 @@ static void __init mx31_3ds_init(void)
>  	imx31_add_imx2_wdt(NULL);
>  	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
>  	imx31_add_mxc_mmc(0, &sdhc1_pdata);
> +
> +	imx31_add_spi_imx0(&spi0_pdata);
> +	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
> +	mxc_register_device(&mx3_fb, &mx3fb_pdata);
>  }
>  
>  static void __init mx31_3ds_timer_init(void)

cheers, Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110307/bc64f646/attachment.sig>


More information about the linux-arm-kernel mailing list