[PATCH 9/9] lpc2k: defconfig for NXP LPC2K platform

Ithamar R. Adema ithamar.adema at team-embedded.nl
Thu Mar 17 11:54:24 EDT 2011


Add a defconfig that is setup to support booting a uClinux based
system. This enables ROMFS/CRAMFS, initrd, and FLAT binaries besides
the drivers for the devices added in the previous patch.

Signed-off-by: Ithamar R. Adema <ithamar.adema at team-embedded.nl>
---
 arch/arm/configs/lpc2k_defconfig |   56 ++++++++++++++++++++++++++++++++++++++
 1 files changed, 56 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/configs/lpc2k_defconfig

diff --git a/arch/arm/configs/lpc2k_defconfig b/arch/arm/configs/lpc2k_defconfig
new file mode 100644
index 0000000..6278dd8
--- /dev/null
+++ b/arch/arm/configs/lpc2k_defconfig
@@ -0,0 +1,56 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_TINY_RCU=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_LPC2K=y
+CONFIG_MACH_LPC2478OEM=y
+CONFIG_PROCESSOR_ID=0x41007700
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_CMDLINE="root=/dev/ram initrd=0xa1a00000,4000k console=ttyS0,115200N8 debug rw earlyprintk"
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_SUSPEND is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
-- 
1.7.1




More information about the linux-arm-kernel mailing list