[PATCH V2 2/3] ARM: S5P: Update machine initialization for HRT
Sangbeom Kim
sbkim73 at samsung.com
Fri Mar 4 00:21:38 EST 2011
This patch update mach-s5p64x0 and mach-s5pv210
machine initialization for hrt support.
PWM Timer3 is used for default clockevent.
PWM Timer4 is used for defualt clocksource.
Signed-off-by: Sangbeom Kim <sbkim73 at samsung.com>
---
arch/arm/mach-s5p64x0/mach-smdk6440.c | 4 +++-
arch/arm/mach-s5p64x0/mach-smdk6450.c | 4 +++-
arch/arm/mach-s5pv210/mach-aquila.c | 4 +++-
arch/arm/mach-s5pv210/mach-goni.c | 4 +++-
arch/arm/mach-s5pv210/mach-smdkc110.c | 4 +++-
arch/arm/mach-s5pv210/mach-smdkv210.c | 4 +++-
arch/arm/mach-s5pv210/mach-torbreck.c | 4 +++-
7 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index e5beb84..676e5c1 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -43,6 +43,7 @@
#include <plat/pll.h>
#include <plat/adc.h>
#include <plat/ts.h>
+#include <plat/s5p-time.h>
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -136,6 +137,7 @@ static void __init smdk6440_map_io(void)
s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
+ s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init smdk6440_machine_init(void)
@@ -159,5 +161,5 @@ MACHINE_START(SMDK6440, "SMDK6440")
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &s5p_timer,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 3a20de0..b474ef4 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -43,6 +43,7 @@
#include <plat/pll.h>
#include <plat/adc.h>
#include <plat/ts.h>
+#include <plat/s5p-time.h>
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -155,6 +156,7 @@ static void __init smdk6450_map_io(void)
s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
s3c24xx_init_clocks(19200000);
s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
+ s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init smdk6450_machine_init(void)
@@ -178,5 +180,5 @@ MACHINE_START(SMDK6450, "SMDK6450")
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &s5p_timer,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 557add4..9a7b47e 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -39,6 +39,7 @@
#include <plat/fb.h>
#include <plat/fimc-core.h>
#include <plat/sdhci.h>
+#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -664,6 +665,7 @@ static void __init aquila_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
+ s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init aquila_machine_init(void)
@@ -698,5 +700,5 @@ MACHINE_START(AQUILA, "Aquila")
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &s5p_timer,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 056f5c7..4ed619a 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -45,6 +45,7 @@
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
+#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -823,6 +824,7 @@ static void __init goni_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
+ s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init goni_machine_init(void)
@@ -873,5 +875,5 @@ MACHINE_START(GONI, "GONI")
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &s5p_timer,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index ce11a02..6c412c8 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -30,6 +30,7 @@
#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/pm.h>
+#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -111,6 +112,7 @@ static void __init smdkc110_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+ s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init smdkc110_machine_init(void)
@@ -138,5 +140,5 @@ MACHINE_START(SMDKC110, "SMDKC110")
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &s5p_timer,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index bc9fdb5..9e2be7f 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -43,6 +43,7 @@
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
+#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -272,6 +273,7 @@ static void __init smdkv210_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+ s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init smdkv210_machine_init(void)
@@ -306,5 +308,5 @@ MACHINE_START(SMDKV210, "SMDKV210")
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &s5p_timer,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 043c938..925fc0d 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -27,6 +27,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
+#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -104,6 +105,7 @@ static void __init torbreck_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
+ s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init torbreck_machine_init(void)
@@ -127,5 +129,5 @@ MACHINE_START(TORBRECK, "TORBRECK")
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &s5p_timer,
MACHINE_END
--
1.7.1
More information about the linux-arm-kernel
mailing list