[PATCH V6 6/8] ST SPEAr: Replacing SIZE macro's with SZ_4K macros
Viresh Kumar
viresh.kumar at st.com
Tue Mar 1 06:26:12 EST 2011
Resource size required mostly is 4K for all devices, whereas currently
reserved space is much beyond that. This patch replaces SIZE macro's used at
multiple places with SZ_4K.
Reviewed-by: Stanley Miao <stanley.miao at windriver.com>
Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim at st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar at st.com>
---
arch/arm/mach-spear3xx/spear300.c | 8 +++-----
arch/arm/mach-spear3xx/spear310.c | 2 +-
arch/arm/mach-spear3xx/spear320.c | 2 +-
arch/arm/mach-spear3xx/spear3xx.c | 12 ++++++------
arch/arm/mach-spear6xx/spear6xx.c | 25 ++++++++++---------------
5 files changed, 21 insertions(+), 28 deletions(-)
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 23d2a14..2697e65 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -437,7 +437,7 @@ struct amba_device gpio1_device = {
},
.res = {
.start = SPEAR300_GPIO_BASE,
- .end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
+ .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {VIRQ_GPIO1, NO_IRQ},
@@ -452,8 +452,7 @@ void __init spear300_init(void)
spear3xx_init();
/* shared irq registration */
- shirq_ras1.regs.base =
- ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
if (shirq_ras1.regs.base) {
ret = spear_shirq_register(&shirq_ras1);
if (ret)
@@ -461,8 +460,7 @@ void __init spear300_init(void)
}
/* pmx initialization */
- pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE,
- SPEAR300_SOC_CONFIG_SIZE);
+ pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
if (pmx_driver.base) {
ret = pmx_register(&pmx_driver);
if (ret)
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 3a3d548..5c0a67b 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -267,7 +267,7 @@ void __init spear310_init(void)
spear3xx_init();
/* shared irq registration */
- base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 8ba3ff2..741c1f4 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -520,7 +520,7 @@ void __init spear320_init(void)
spear3xx_init();
/* shared irq registration */
- base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 634116f..d3ba8ca 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -35,7 +35,7 @@ struct amba_device gpio_device = {
},
.res = {
.start = SPEAR3XX_ICM3_GPIO_BASE,
- .end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1,
+ .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
@@ -48,7 +48,7 @@ struct amba_device uart_device = {
},
.res = {
.start = SPEAR3XX_ICM1_UART_BASE,
- .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
+ .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART, NO_IRQ},
@@ -71,22 +71,22 @@ struct map_desc spear3xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR3XX_ICM1_UART_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
- .length = SPEAR3XX_ICM1_UART_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ML1_VIC_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
- .length = SPEAR3XX_ML1_VIC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR3XX_ICM3_SYS_CTRL_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
- .length = SPEAR3XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 378440b..9818129 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -31,8 +31,7 @@ struct amba_device uart_device[] = {
},
.res = {
.start = SPEAR6XX_ICM1_UART0_BASE,
- .end = SPEAR6XX_ICM1_UART0_BASE +
- SPEAR6XX_ICM1_UART0_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_0, NO_IRQ},
@@ -42,8 +41,7 @@ struct amba_device uart_device[] = {
},
.res = {
.start = SPEAR6XX_ICM1_UART1_BASE,
- .end = SPEAR6XX_ICM1_UART1_BASE +
- SPEAR6XX_ICM1_UART1_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_1, NO_IRQ},
@@ -72,8 +70,7 @@ struct amba_device gpio_device[] = {
},
.res = {
.start = SPEAR6XX_CPU_GPIO_BASE,
- .end = SPEAR6XX_CPU_GPIO_BASE +
- SPEAR6XX_CPU_GPIO_SIZE - 1,
+ .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
@@ -84,8 +81,7 @@ struct amba_device gpio_device[] = {
},
.res = {
.start = SPEAR6XX_ICM3_GPIO_BASE,
- .end = SPEAR6XX_ICM3_GPIO_BASE +
- SPEAR6XX_ICM3_GPIO_SIZE - 1,
+ .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
@@ -96,8 +92,7 @@ struct amba_device gpio_device[] = {
},
.res = {
.start = SPEAR6XX_ICM2_GPIO_BASE,
- .end = SPEAR6XX_ICM2_GPIO_BASE +
- SPEAR6XX_ICM2_GPIO_SIZE - 1,
+ .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_APPL_GPIO, NO_IRQ},
@@ -122,27 +117,27 @@ static struct map_desc spear6xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR6XX_ICM1_UART0_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
- .length = SPEAR6XX_ICM1_UART0_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
- .length = SPEAR6XX_CPU_VIC_PRI_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
- .length = SPEAR6XX_CPU_VIC_SEC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_BASE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
--
1.7.2.2
More information about the linux-arm-kernel
mailing list