[patch v1 1/3] arm: introduce cross trigger interface helpers

tom.leiming at gmail.com tom.leiming at gmail.com
Tue Mar 1 11:58:29 EST 2011


From: Ming Lei <tom.leiming at gmail.com>

OMAP4 uses cross trigger interface(CTI) to route
performance monitor irq to GIC, so introduce cti
helpers to make access for cti easily.

Signed-off-by: Ming Lei <tom.leiming at gmail.com>
---
 arch/arm/include/asm/cti.h |  177 ++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 177 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/include/asm/cti.h

diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h
new file mode 100644
index 0000000..c9addd3
--- /dev/null
+++ b/arch/arm/include/asm/cti.h
@@ -0,0 +1,177 @@
+/*
+ *  arch/arm/include/asm/cti.h
+ */
+#ifndef __ASMARM_CTI_H
+#define __ASMARM_CTI_H
+
+#include	<asm/io.h>
+
+/*The registers' definition is from section 3.2 of
+ * 	Embedded Cross Trigger Revision: r0p0
+ **/
+#define		CTICONTROL		0x000
+#define		CTISTATUS		0x004
+#define		CTILOCK			0x008
+#define		CTIPROTECTION		0x00C
+#define		CTIINTACK		0x010
+#define		CTIAPPSET		0x014
+#define		CTIAPPCLEAR		0x018
+#define		CTIAPPPULSE		0x01c
+#define		CTIINEN			0x020
+#define		CTIOUTEN		0x0A0
+#define		CTITRIGINSTATUS		0x130
+#define		CTITRIGOUTSTATUS	0x134
+#define		CTICHINSTATUS		0x138
+#define		CTICHOUTSTATUS		0x13c
+#define		CTIPERIPHID0		0xFE0
+#define		CTIPERIPHID1		0xFE4
+#define		CTIPERIPHID2		0xFE8
+#define		CTIPERIPHID3		0xFEC
+#define		CTIPCELLID0		0xFF0
+#define		CTIPCELLID1		0xFF4
+#define		CTIPCELLID2		0xFF8
+#define		CTIPCELLID3		0xFFC
+
+/*The two below are from section 3.6.4 of
+ * 	CoreSight v1.0 Architecture Specification
+ **/
+#define		LOCKACCESS		0xFB0
+#define		LOCKSTATUS		0xFB4
+
+/**
+ * struct cti - cross trigger interface struct
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out_for_irq: triger out number which will cause
+ * 	the @irq happen
+ *
+ * cti struct used to operate cti registers.
+ */
+struct cti {
+	void *base;
+	int irq;
+	int trig_out_for_irq;
+};
+
+/**
+ * cti_init - initialize the cti instance
+ * @cti: cti instance
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out: triger out number which will cause
+ * 	the @irq happen
+ *
+ * called by machine code to pass the board dependent
+ * @base, @irq and @trig_out to cti.
+ */
+static inline void cti_init(struct cti *cti,
+	void *base, int irq, int trig_out)
+{
+	cti->base = base;
+	cti->irq  = irq;
+	cti->trig_out_for_irq = trig_out;
+}
+
+/**
+ * cti_map_trigger - use the @chan to map @trig_in to @trig_out
+ * @cti: cti instance
+ * @trig_in: trigger in number
+ * @trig_out: trigger out number
+ * @channel: channel number
+ *
+ * This function maps one trigger in of @trig_in to one trigger
+ * out of @trig_out using the channel @chan.
+ */
+static inline void cti_map_trigger(struct cti *cti,
+	int trig_in, int trig_out, int chan)
+{
+	void *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + CTIINEN + trig_in * 4);
+	val |= 1 << chan;
+	__raw_writel(val, base + CTIINEN + trig_in * 4);
+
+	val = __raw_readl(base + CTIOUTEN + trig_out * 4);
+	val |= 1 << chan;
+	__raw_writel(val, base + CTIOUTEN + trig_out * 4);
+}
+
+/**
+ * cti_enable - enable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_enable(struct cti *cti)
+{
+	__raw_writel(0x1, cti->base);
+}
+
+/**
+ * cti_disable - disable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_disable(struct cti *cti)
+{
+	__raw_writel(0, cti->base);
+}
+
+/**
+ * cti_irq_ack - clear the cti irq
+ * @cti: cti instance
+ *
+ * clear the cti irq
+ */
+static inline void cti_irq_ack(struct cti *cti)
+{
+	void *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + CTIINTACK);
+	val |= 1 << cti->trig_out_for_irq;
+	__raw_writel(val, base + CTIINTACK);
+}
+
+/**
+ * cti_unlock - unlock cti module
+ * @cti: cti instance
+ *
+ * unlock the cti module, or else any writes to the cti
+ * module is not allowed.
+ */
+static inline void cti_unlock(struct cti *cti)
+{
+	void *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + LOCKSTATUS);
+
+	if (val & 1) {
+		val = 0xC5ACCE55;
+		__raw_writel(val, base + LOCKACCESS);
+	}
+}
+
+/**
+ * cti_unlock - lock cti module
+ * @cti: cti instance
+ *
+ * lock the cti module, so any writes to the cti
+ * module will be not allowed.
+ */
+static inline void cti_lock(struct cti *cti)
+{
+	void *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + LOCKSTATUS);
+
+	if (!(val & 1)) {
+		val = ~0xC5ACCE55;
+		__raw_writel(val, base + LOCKACCESS);
+	}
+}
+#endif
-- 
1.7.3




More information about the linux-arm-kernel mailing list