[PATCH 3/6] i2c-pxa2xx: Add PCI support for PXA I2C controller
Ben Dooks
ben-i2c at fluff.org
Tue Mar 1 19:51:12 EST 2011
On 23/02/11 11:38, Sebastian Andrzej Siewior wrote:
> The Sodaville I2C controller is almost the same as found on PXA2xx. The
> difference:
> - the register are at a different offset
> - no slave support
>
> The PCI probe code adds three platform devices which are probed then by
> the platform code.
> The X86 part also adds dummy clock defines because we don't have HW
> clock support.
>
> Signed-off-by: Sebastian Andrzej Siewior<bigeasy at linutronix.de>
> Signed-off-by: Dirk Brandewie<dirk.brandewie at gmail.com>
> ---
> drivers/i2c/busses/Kconfig | 7 +-
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-pxa-pci.c | 176 ++++++++++++++++++++++++++++++++++++++
> drivers/i2c/busses/i2c-pxa.c | 27 +++++-
> 4 files changed, 206 insertions(+), 5 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-pxa-pci.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 113505a..deefa13 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -525,15 +525,18 @@ config I2C_PNX
>
> config I2C_PXA
> tristate "Intel PXA2XX I2C adapter"
> - depends on ARCH_PXA || ARCH_MMP
> + depends on ARCH_PXA || ARCH_MMP || (X86_32&& PCI&& OF)
> help
> If you have devices in the PXA I2C bus, say yes to this option.
> This driver can also be built as a module. If so, the module
> will be called i2c-pxa.
>
> +config I2C_PXA_PCI
> + def_bool I2C_PXA&& X86_32&& PCI&& OF
> +
> config I2C_PXA_SLAVE
> bool "Intel PXA2XX I2C Slave comms support"
> - depends on I2C_PXA
> + depends on I2C_PXA&& !X86_32
> help
> Support I2C slave mode communications on the PXA I2C bus. This
> is necessary for systems where the PXA may be a target on the
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 9d2d0ec..e95d0bf 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
> obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
> obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
> obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
> +obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
> obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
> obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
> obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
> diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c
> new file mode 100644
> index 0000000..6659d26
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-pxa-pci.c
> @@ -0,0 +1,176 @@
> +/*
> + * The CE4100's I2C device is more or less the same one as found on PXA.
> + * It does not support slave mode, the register slightly moved. This PCI
> + * device provides three bars, every contains a single I2C controller.
> + */
> +#include<linux/pci.h>
> +#include<linux/platform_device.h>
> +#include<linux/i2c/pxa-i2c.h>
> +#include<linux/of.h>
> +#include<linux/of_device.h>
> +#include<linux/of_address.h>
> +
> +#define CE4100_PCI_I2C_DEVS 3
> +
> +struct ce4100_devices {
> + struct platform_device *pdev[CE4100_PCI_I2C_DEVS];
> +};
> +
> +static struct platform_device *add_i2c_device(struct pci_dev *dev, int bar)
> +{
> + struct platform_device *pdev;
> + struct i2c_pxa_platform_data pdata;
> + struct resource res[2];
> + struct device_node *child;
> + static int devnum;
> + int ret;
> +
> + memset(&pdata, 0, sizeof(struct i2c_pxa_platform_data));
> + memset(&res, 0, sizeof(res));
> +
> + res[0].flags = IORESOURCE_MEM;
> + res[0].start = pci_resource_start(dev, bar);
> + res[0].end = pci_resource_end(dev, bar);
> +
> + res[1].flags = IORESOURCE_IRQ;
> + res[1].start = dev->irq;
> + res[1].end = dev->irq;
> +
> + for_each_child_of_node(dev->dev.of_node, child) {
> + const void *prop;
> + struct resource r;
> + int ret;
> +
> + ret = of_address_to_resource(child, 0,&r);
> + if (ret< 0)
> + continue;
> + if (r.start != res[0].start)
> + continue;
> + if (r.end != res[0].end)
> + continue;
> + if (r.flags != res[0].flags)
> + continue;
> +
> + prop = of_get_property(child, "fast-mode", NULL);
> + if (prop)
> + pdata.fast_mode = 1;
> +
> + break;
> + }
> +
> + if (!child) {
> + dev_err(&dev->dev, "failed to match a DT node for bar %d.\n",
> + bar);
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + pdev = platform_device_alloc("ce4100-i2c", devnum);
> + if (!pdev) {
> + of_node_put(child);
> + ret = -ENOMEM;
> + goto out;
> + }
> + pdev->dev.parent =&dev->dev;
> + pdev->dev.of_node = child;
> +
> + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
> + if (ret)
> + goto err;
> +
> + ret = platform_device_add_data(pdev,&pdata, sizeof(pdata));
> + if (ret)
> + goto err;
> +
> + ret = platform_device_add(pdev);
> + if (ret)
> + goto err;
> + devnum++;
> + return pdev;
> +err:
> + platform_device_put(pdev);
> +out:
> + return ERR_PTR(ret);
> +}
> +
> +static int __devinit ce4100_i2c_probe(struct pci_dev *dev,
> + const struct pci_device_id *ent)
> +{
> + int ret;
> + int i;
> + struct ce4100_devices *sds;
> +
> + ret = pci_enable_device_mem(dev);
> + if (ret)
> + return ret;
> +
> + if (!dev->dev.of_node) {
> + dev_err(&dev->dev, "Missing device tree node.\n");
> + return -EINVAL;
> + }
> + sds = kzalloc(sizeof(*sds), GFP_KERNEL);
> + if (!sds)
> + goto err_mem;
> +
> + for (i = 0; i< ARRAY_SIZE(sds->pdev); i++) {
> + sds->pdev[i] = add_i2c_device(dev, i);
> + if (IS_ERR(sds->pdev[i])) {
> + while (--i>= 0)
> + platform_device_unregister(sds->pdev[i]);
> + goto err_dev_add;
> + }
> + }
> + pci_set_drvdata(dev, sds);
> + return 0;
> +
> +err_dev_add:
> + pci_set_drvdata(dev, NULL);
> + kfree(sds);
> +err_mem:
> + pci_disable_device(dev);
> + return ret;
> +}
> +
> +static void __devexit ce4100_i2c_remove(struct pci_dev *dev)
> +{
> + struct ce4100_devices *sds;
> + unsigned int i;
> +
> + sds = pci_get_drvdata(dev);
> + pci_set_drvdata(dev, NULL);
> +
> + for (i = 0; i< ARRAY_SIZE(sds->pdev); i++)
> + platform_device_unregister(sds->pdev[i]);
> +
> + pci_disable_device(dev);
> + kfree(sds);
> +}
> +
> +static struct pci_device_id ce4100_i2c_devices[] __devinitdata = {
> + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)},
> + { },
> +};
> +MODULE_DEVICE_TABLE(pci, ce4100_i2c_devices);
> +
> +static struct pci_driver ce4100_i2c_driver = {
> + .name = "ce4100_i2c",
> + .id_table = ce4100_i2c_devices,
> + .probe = ce4100_i2c_probe,
> + .remove = __devexit_p(ce4100_i2c_remove),
> +};
> +
> +static int __init ce4100_i2c_init(void)
> +{
> + return pci_register_driver(&ce4100_i2c_driver);
> +}
> +module_init(ce4100_i2c_init);
> +
> +static void __exit ce4100_i2c_exit(void)
> +{
> + pci_unregister_driver(&ce4100_i2c_driver);
> +}
> +module_exit(ce4100_i2c_exit);
> +
> +MODULE_DESCRIPTION("CE4100 PCI-I2C glue code for PXA's driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Sebastian Andrzej Siewior<bigeasy at linutronix.de>");
> diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
> index fc2a90e..225e9a5 100644
> --- a/drivers/i2c/busses/i2c-pxa.c
> +++ b/drivers/i2c/busses/i2c-pxa.c
> @@ -38,6 +38,13 @@
>
> #include<asm/irq.h>
>
> +#ifdef CONFIG_X86
> +#define clk_get(dev, id) NULL
> +#define clk_put(clk) do { } while (0)
> +#define clk_disable(clk) do { } while (0)
> +#define clk_enable(clk) do { } while (0)
> +#endif
> +
Maybe be better on !CONFIG_HAVE_CLOCK (or whatever it is called)
> struct pxa_reg_layout {
> u32 ibmr;
> u32 idbr;
> @@ -49,6 +56,7 @@ struct pxa_reg_layout {
> enum pxa_i2c_types {
> REGS_PXA2XX,
> REGS_PXA3XX,
> + REGS_CE4100,
> };
>
> /*
> @@ -69,11 +77,19 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
> .isr = 0x18,
> .isar = 0x20,
> },
> + [REGS_CE4100] = {
> + .ibmr = 0x14,
> + .idbr = 0x0c,
> + .icr = 0x00,
> + .isr = 0x04,
> + /* no isar register */
> + },
> };
>
> static const struct platform_device_id i2c_pxa_id_table[] = {
> { "pxa2xx-i2c", REGS_PXA2XX },
> { "pxa3xx-pwri2c", REGS_PXA3XX },
> + { "ce4100-i2c", REGS_CE4100 },
> { },
> };
> MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
> @@ -442,7 +458,8 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
> writel(I2C_ISR_INIT, _ISR(i2c));
> writel(readl(_ICR(i2c))& ~ICR_UR, _ICR(i2c));
>
> - writel(i2c->slave_addr, _ISAR(i2c));
> + if (i2c->reg_isar)
> + writel(i2c->slave_addr, _ISAR(i2c));
>
> /* set control register values */
> writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
> @@ -1074,7 +1091,8 @@ static int i2c_pxa_probe(struct platform_device *dev)
> i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
> i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
> i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
> - i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
> + if (i2c_type != REGS_CE4100)
> + i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
>
> i2c->iobase = res->start;
> i2c->iosize = resource_size(res);
> @@ -1113,7 +1131,10 @@ static int i2c_pxa_probe(struct platform_device *dev)
> i2c->adap.algo_data = i2c;
> i2c->adap.dev.parent =&dev->dev;
>
> - ret = i2c_add_numbered_adapter(&i2c->adap);
> + if (i2c_type == REGS_CE4100)
> + ret = i2c_add_adapter(&i2c->adap);
> + else
> + ret = i2c_add_numbered_adapter(&i2c->adap);
> if (ret< 0) {
> printk(KERN_INFO "I2C: Failed to add bus\n");
> goto eadapt;
More information about the linux-arm-kernel
mailing list