[RFC PATCH 3/5] OMAP2+:Common CPU DIE ID reading code reads wrong registers for OMAP4430

[Andy Green]

This adapts the register offsets used to read the CPU DIE ID registers
when run on 44XX so they match what is in the OMAP4430 Reference Manual
page 269

Signed-off-by: Andy Green <andy.green at linaro.org>
---

 arch/arm/mach-omap2/id.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index fc69ec5..733bb27 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -84,6 +84,11 @@ EXPORT_SYMBOL(omap_type);
 #define OMAP_TAP_DIE_ID_2	0x0220
 #define OMAP_TAP_DIE_ID_3	0x0224
 
+#define OMAP_TAP_DIE_ID_44XX_0	0x0200
+#define OMAP_TAP_DIE_ID_44XX_1	0x0208
+#define OMAP_TAP_DIE_ID_44XX_2	0x020c
+#define OMAP_TAP_DIE_ID_44XX_3	0x0210
+
 #define read_tap_reg(reg)	__raw_readl(tap_base  + (reg))
 
 struct omap_id {
@@ -107,6 +112,14 @@ static u16 tap_prod_id;
 
 void omap_get_die_id(struct omap_die_id *odi)
 {
+	if (cpu_is_omap44xx()) {
+		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
+		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
+		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
+		odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_3);
+
+		return;
+	}
 	odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0);
 	odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1);
 	odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2);