[PATCH v3 2/3] OMAP: DSS2: Renaming register macro DISPC_DIVISOR(ch)
Raghuveer Murthy
raghuveer.murthy at ti.com
Thu Mar 3 10:27:59 EST 2011
The OMAP4 DISPC_DIVISOR1 is backward compatible to OMAP3xxx DISPC_DIVISOR.
However DISPC_DIVISOR is also provided in OMAP4, to control DISPC_CORE_CLK
independent of Primary and Secondary display clocks.
Renamed DISPC_DIVISOR(ch) to DISPC_DIVISORo(ch), to facilitate introduction
of DISPC_DIVISOR register, which is specific for OMAP4. OMAP4 has 3 registers
DISPC_DIVISOR, DISPC_DIVISOR1 and DISPC_DIVISOR2.
Also updated, all the usages of DISPC_DIVISOR(ch) to DISPC_DIVISORo(ch).
Use DISPC_DIVISORo(ch) when DISPC_DIVISOR1 or DISPC_DIVISOR2 has to be
configured
OMAP4 TRM uses DISPC_DIVISORo generically to refer to DISPC_DIVISOR1 and
DISPC_DIVISOR2
Signed-off-by: Raghuveer Murthy <raghuveer.murthy at ti.com>
---
drivers/video/omap2/dss/dispc.c | 27 ++++++++++++++-------------
1 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 9fb11c1..a3dff5f 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -73,7 +73,7 @@ struct dispc_reg { u16 idx; };
#define DISPC_TIMING_H(ch) DISPC_REG(ch != 2 ? 0x0064 : 0x0400)
#define DISPC_TIMING_V(ch) DISPC_REG(ch != 2 ? 0x0068 : 0x0404)
#define DISPC_POL_FREQ(ch) DISPC_REG(ch != 2 ? 0x006C : 0x0408)
-#define DISPC_DIVISOR(ch) DISPC_REG(ch != 2 ? 0x0070 : 0x040C)
+#define DISPC_DIVISORo(ch) DISPC_REG(ch != 2 ? 0x0070 : 0x040C)
#define DISPC_GLOBAL_ALPHA DISPC_REG(0x0074)
#define DISPC_SIZE_DIG DISPC_REG(0x0078)
#define DISPC_SIZE_LCD(ch) DISPC_REG(ch != 2 ? 0x007C : 0x03CC)
@@ -128,6 +128,7 @@ struct dispc_reg { u16 idx; };
#define DISPC_VID_PRELOAD(n) DISPC_REG(0x230 + (n)*0x04)
+#define DISPC_DIVISOR DISPC_REG(0x0804)
#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \
DISPC_IRQ_OCP_ERR | \
@@ -231,7 +232,7 @@ void dispc_save_context(void)
SR(TIMING_H(0));
SR(TIMING_V(0));
SR(POL_FREQ(0));
- SR(DIVISOR(0));
+ SR(DIVISORo(0));
SR(GLOBAL_ALPHA);
SR(SIZE_DIG);
SR(SIZE_LCD(0));
@@ -243,7 +244,7 @@ void dispc_save_context(void)
SR(TIMING_H(2));
SR(TIMING_V(2));
SR(POL_FREQ(2));
- SR(DIVISOR(2));
+ SR(DIVISORo(2));
SR(CONFIG2);
}
@@ -390,7 +391,7 @@ void dispc_restore_context(void)
RR(TIMING_H(0));
RR(TIMING_V(0));
RR(POL_FREQ(0));
- RR(DIVISOR(0));
+ RR(DIVISORo(0));
RR(GLOBAL_ALPHA);
RR(SIZE_DIG);
RR(SIZE_LCD(0));
@@ -401,7 +402,7 @@ void dispc_restore_context(void)
RR(TIMING_H(2));
RR(TIMING_V(2));
RR(POL_FREQ(2));
- RR(DIVISOR(2));
+ RR(DIVISORo(2));
RR(CONFIG2);
}
@@ -2316,7 +2317,7 @@ static void dispc_set_lcd_divisor(enum omap_channel channel, u16 lck_div,
BUG_ON(pck_div < 2);
enable_clocks(1);
- dispc_write_reg(DISPC_DIVISOR(channel),
+ dispc_write_reg(DISPC_DIVISORo(channel),
FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0));
enable_clocks(0);
}
@@ -2325,7 +2326,7 @@ static void dispc_get_lcd_divisor(enum omap_channel channel, int *lck_div,
int *pck_div)
{
u32 l;
- l = dispc_read_reg(DISPC_DIVISOR(channel));
+ l = dispc_read_reg(DISPC_DIVISORo(channel));
*lck_div = FLD_GET(l, 23, 16);
*pck_div = FLD_GET(l, 7, 0);
}
@@ -2351,7 +2352,7 @@ unsigned long dispc_lclk_rate(enum omap_channel channel)
unsigned long r;
u32 l;
- l = dispc_read_reg(DISPC_DIVISOR(channel));
+ l = dispc_read_reg(DISPC_DIVISORo(channel));
lcd = FLD_GET(l, 23, 16);
@@ -2366,7 +2367,7 @@ unsigned long dispc_pclk_rate(enum omap_channel channel)
unsigned long r;
u32 l;
- l = dispc_read_reg(DISPC_DIVISOR(channel));
+ l = dispc_read_reg(DISPC_DIVISORo(channel));
lcd = FLD_GET(l, 23, 16);
pcd = FLD_GET(l, 7, 0);
@@ -2483,7 +2484,7 @@ void dispc_dump_regs(struct seq_file *s)
DUMPREG(DISPC_TIMING_H(0));
DUMPREG(DISPC_TIMING_V(0));
DUMPREG(DISPC_POL_FREQ(0));
- DUMPREG(DISPC_DIVISOR(0));
+ DUMPREG(DISPC_DIVISORo(0));
DUMPREG(DISPC_GLOBAL_ALPHA);
DUMPREG(DISPC_SIZE_DIG);
DUMPREG(DISPC_SIZE_LCD(0));
@@ -2495,7 +2496,7 @@ void dispc_dump_regs(struct seq_file *s)
DUMPREG(DISPC_TIMING_H(2));
DUMPREG(DISPC_TIMING_V(2));
DUMPREG(DISPC_POL_FREQ(2));
- DUMPREG(DISPC_DIVISOR(2));
+ DUMPREG(DISPC_DIVISORo(2));
DUMPREG(DISPC_SIZE_LCD(2));
}
@@ -2737,8 +2738,8 @@ int dispc_get_clock_div(enum omap_channel channel,
fck = dispc_fclk_rate();
- cinfo->lck_div = REG_GET(DISPC_DIVISOR(channel), 23, 16);
- cinfo->pck_div = REG_GET(DISPC_DIVISOR(channel), 7, 0);
+ cinfo->lck_div = REG_GET(DISPC_DIVISORo(channel), 23, 16);
+ cinfo->pck_div = REG_GET(DISPC_DIVISORo(channel), 7, 0);
cinfo->lck = fck / cinfo->lck_div;
cinfo->pck = cinfo->lck / cinfo->pck_div;
--
1.7.0.4
More information about the linux-arm-kernel
mailing list