[PATCH 0/3] TP6105x core and regulator driver v2
Linus Walleij
linus.walleij at stericsson.com
Wed Mar 9 07:02:10 EST 2011
From: Linus Walleij <linus.walleij at linaro.org>
This adds an MFD device for handling the TPS61052 boost converter
used in audio.
Changes v1->v2:
- Only register the mfd cells that are actually going to be used
in the core driver (Mark)
- Don't set deafault valies in any registers on startup of core nor
regulator driver (Mark)
- Use voltage set/get selector APIs to simplify regulator code (Mark)
- Reorder initcall placements (Mark)
- Platform data only allows one voltage so don't mark the consumer
as "changeable" (Mark)
- Remove mfd cells on exit from tps6105x core (self)
- Clear separation of core driver and regulator patch in the
series (Jonas)
- Do not mark core driver experimental (Mark)
- De-parenthesize numerals in header file (Jonas)
- kmalloc rather than kzalloc core state holder (Jonas)
- Update copyright headers (Jonas, Lee)
If any of you guys are happy, acked/reviewed-by is appreciated.
Linus Walleij (3):
mfd: add a core driver for TI TPS61050/TPS61052 chips v2
regulator: add a subdriver for TI TPS6105x regulator portions v2
mach-ux500: configure board for the TPS61052 regulator v2
arch/arm/mach-ux500/Kconfig | 1 +
arch/arm/mach-ux500/board-mop500-regulators.c | 25 +++
arch/arm/mach-ux500/board-mop500-regulators.h | 1 +
arch/arm/mach-ux500/board-mop500.c | 14 ++
drivers/mfd/Kconfig | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/tps6105x.c | 245 +++++++++++++++++++++++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 2 +-
drivers/regulator/tps6105x-regulator.c | 195 ++++++++++++++++++++
include/linux/mfd/tps6105x.h | 101 ++++++++++
11 files changed, 604 insertions(+), 1 deletions(-)
create mode 100644 drivers/mfd/tps6105x.c
create mode 100644 drivers/regulator/tps6105x-regulator.c
create mode 100644 include/linux/mfd/tps6105x.h
--
1.7.3.2
More information about the linux-arm-kernel
mailing list