[PATCH 3/3] arm: omap4: support pmu

tom.leiming at gmail.com tom.leiming at gmail.com
Tue Mar 1 08:17:14 EST 2011


From: Ming Lei <tom.leiming at gmail.com>

This patch supports pmu irq routed from CTI, so
make pmu/perf working on OMAP4.

The idea is from Woodruff Richard in the disscussion
"Oprofile on Pandaboard / Omap4" of pandaboard at googlegroups.com.

Cc: Woodruff Richard <r-woodruff2 at ti.com>
Cc: Tony Lindgren <tony at atomide.com>
Cc: linux-omap at vger.kernel.org
Signed-off-by: Ming Lei <tom.leiming at gmail.com>
---
 arch/arm/mach-omap2/devices.c |   54 ++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 53 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 71f099b..54e9705 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -34,6 +34,7 @@
 
 #include "mux.h"
 #include "control.h"
+#include "dbg44xx.h"
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 
@@ -347,19 +348,70 @@ static struct resource omap3_pmu_resource = {
 	.flags	= IORESOURCE_IRQ,
 };
 
+static struct resource omap4_pmu_resource[] = {
+	{
+	.start	= OMAP44XX_IRQ_CTI0,
+	.end	= OMAP44XX_IRQ_CTI0,
+	.flags	= IORESOURCE_IRQ,
+	},
+	{
+	.start	= OMAP44XX_IRQ_CTI1,
+	.end	= OMAP44XX_IRQ_CTI1,
+	.flags	= IORESOURCE_IRQ,
+	}
+};
+
 static struct platform_device omap_pmu_device = {
 	.name		= "arm-pmu",
 	.id		= ARM_PMU_DEVICE_CPU,
 	.num_resources	= 1,
 };
 
+struct pmu_platform_data omap4_pmu_data;
+
+static void omap4_configure_pmu_irq(void)
+{
+	void *base0;
+	void *base1;
+
+	base0 = ioremap(OMAP4430_CTI0_BASE, 4096);
+	base1 = ioremap(OMAP4430_CTI1_BASE, 4096);
+	if (!base0 && !base1) {
+		pr_err("ioremap for omap4 CTI failed\n");
+		return;
+	}
+
+	/*configure CTI0 for pmu irq routing*/
+	cti_init(&omap4_pmu_data.cti[0], base0,
+			OMAP44XX_IRQ_CTI0, 6);
+	cti_unlock(&omap4_pmu_data.cti[0]);
+	cti_map_trigger(&omap4_pmu_data.cti[0],
+			1, 6, 2);
+
+	/*configure CTI1 for pmu irq routing*/
+	cti_init(&omap4_pmu_data.cti[1], base1,
+			OMAP44XX_IRQ_CTI1, 6);
+	cti_unlock(&omap4_pmu_data.cti[1]);
+	cti_map_trigger(&omap4_pmu_data.cti[1],
+			1, 6, 3);
+
+	omap4_pmu_data.cti_cnt = 2;
+	omap4_pmu_data.use_cti_irq = 1;
+}
+
 static void omap_init_pmu(void)
 {
 	if (cpu_is_omap24xx())
 		omap_pmu_device.resource = &omap2_pmu_resource;
 	else if (cpu_is_omap34xx())
 		omap_pmu_device.resource = &omap3_pmu_resource;
-	else
+	else if (cpu_is_omap44xx()) {
+		omap_pmu_device.resource = omap4_pmu_resource;
+		omap_pmu_device.num_resources = 2;
+		omap_pmu_device.dev.platform_data = &omap4_pmu_data;
+
+		omap4_configure_pmu_irq();
+	} else
 		return;
 
 	platform_device_register(&omap_pmu_device);
-- 
1.7.3




More information about the linux-arm-kernel mailing list