[PATCH v2] [ARM] MX1: Add ARMadeus Systems APF9328 board support

[Gwenhael Goavec-Merou]

APF9328 is an i.MXL based SOM (System On Module) that can be plugged on 
several docking/development boards. Here only basic module support 
is added (Ethernet, Serial, NOR Flash).

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou at armadeus.com>
Signed-off-by: Eric Jarrige <eric.jarrige at armadeus.org>
Signed-off-by: Nicolas Colombain <nicolas.colombain at armadeus.com>
Signed-off-by: Julien Boibessot <julien.boibessot at armadeus.com>
---

Changes since v1:
	- merge pins tables for UART
	- suppress init/exit driver callbacks for UART

 arch/arm/mach-imx/Kconfig        |    6 ++
 arch/arm/mach-imx/Makefile       |    1 +
 arch/arm/mach-imx/mach-apf9328.c |  146 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 153 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-imx/mach-apf9328.c

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 56684b5..863ed2c 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -51,6 +51,12 @@ config MACH_SCB9328
 	help
 	  Say Y here if you are using a Synertronixx scb9328 board
 
+config MACH_APF9328
+	bool "APF9328"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Yes here if you are using the Armadeus APF9328 development board
+
 endif
 
 if ARCH_MX2
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 77100bf..444fdf7 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
 
 obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
 
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
new file mode 100644
index 0000000..49abc73
--- /dev/null
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -0,0 +1,146 @@
+/*
+ * linux/arch/arm/mach-imx/mach-apf9328.c
+ *
+ * Copyright (c) 2005-2011 ARMadeus systems <support at armadeus.com>
+ *
+ * This work is based on mach-scb9328.c which is:
+ * Copyright (c) 2004 Sascha Hauer <saschahauer at web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert at netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/iomux-mx1.h>
+
+#include "devices-imx1.h"
+
+static const int apf9328_pins[] __initconst = {
+	/* UART1 */
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+	/* UART2 */
+	PB28_PF_UART2_CTS,
+	PB29_PF_UART2_RTS,
+	PB30_PF_UART2_TXD,
+	PB31_PF_UART2_RXD,
+};
+
+/*
+ * The APF9328 can have up to 32MB NOR Flash
+ */
+static struct resource flash_resource = {
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data apf9328_flash_data = {
+	.width  = 2,
+};
+
+static struct platform_device apf9328_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &apf9328_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * APF9328 has a DM9000 Ethernet controller
+ */
+static struct dm9000_plat_data dm9000_setup = {
+	.flags          = DM9000_PLATF_16BITONLY
+};
+
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start  = (MX1_CS4_PHYS + 0x00C00000),
+		.end    = (MX1_CS4_PHYS + 0x00C00001),
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = (MX1_CS4_PHYS + 0x00C00002),
+		.end    = (MX1_CS4_PHYS + 0x00C00003),
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = (IRQ_GPIOB(14)),
+		.end    = (IRQ_GPIOB(14)),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device dm9000x_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &dm9000_setup,
+	}
+};
+
+/* --- SERIAL RESSOURCE --- */
+static struct imxuart_platform_data uart0_pdata = {
+	.flags = 0,
+};
+
+static struct imxuart_platform_data uart1_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&apf9328_flash_device,
+	&dm9000x_device,
+};
+
+static void __init apf9328_init(void)
+{
+	mxc_gpio_setup_multiple_pins(apf9328_pins,
+		ARRAY_SIZE(apf9328_pins),
+		"APF9328");
+
+	imx1_add_imx_uart0(&uart0_pdata);
+	imx1_add_imx_uart1(&uart1_pdata);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init apf9328_timer_init(void)
+{
+	mx1_clocks_init(32768);
+}
+
+static struct sys_timer apf9328_timer = {
+	.init	= apf9328_timer_init,
+};
+
+MACHINE_START(APF9328, "Armadeus APF9328")
+	/* Maintainer: <gwenhael.goavec-merou at armadeus.com> */
+	.boot_params  = MX1_PHYS_OFFSET + 0x100,
+	.map_io       = mx1_map_io,
+	.init_irq     = mx1_init_irq,
+	.timer        = &apf9328_timer,
+	.init_machine = apf9328_init,
+MACHINE_END
-- 
1.7.3.4