[PATCH 2/2] ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation

[Vasily Khoruzhick]

On Monday 07 March 2011 09:42:00 Lars-Peter Clausen wrote:
> Currently all boards using the s3c2410_udc driver use a GPIO to control the
> state of the pullup, as a result the same code is reimplemented in each
> board This patch changes these boards to use the common implementation for
> GPIO controlled pullup in the UDC driver.
> 
> Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
> ---
>  arch/arm/mach-s3c2410/mach-h1940.c    |   24 +-----------------------
>  arch/arm/mach-s3c2410/mach-n30.c      |   21 +--------------------
>  arch/arm/mach-s3c2412/mach-smdk2413.c |   24 +-----------------------
>  arch/arm/mach-s3c2440/mach-gta02.c    |   22 ++--------------------
>  arch/arm/mach-s3c2440/mach-mini2440.c |   24 +-----------------------
>  arch/arm/mach-s3c2440/mach-rx1950.c   |   21 +--------------------
>  6 files changed, 7 insertions(+), 129 deletions(-)

For h1940 and rx1950 parts:

Acked-by: Vasily Khoruzhick <anarsoul at gmail.com>