[PATCH 2/2] ARM MX53_LOCO: add pwm backlight device
Jason Chen
b02280 at freescale.com
Tue Mar 1 01:30:18 EST 2011
Signed-off-by: Jason Chen <b02280 at freescale.com>
---
arch/arm/mach-mx5/board-mx53_loco.c | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 160899e..6c42185 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -23,6 +23,7 @@
#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -35,6 +36,7 @@
#include "crm_regs.h"
#include "devices-imx53.h"
+#include "devices.h"
#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
@@ -203,6 +205,13 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
.bitrate = 100000,
};
+static struct platform_pwm_backlight_data loco_pwm_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 255,
+ .dft_brightness = 128,
+ .pwm_period_ns = 50000,
+};
+
static void __init mx53_loco_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
@@ -213,6 +222,10 @@ static void __init mx53_loco_board_init(void)
imx53_add_imx2_wdt(0, NULL);
imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
+
+ imx53_add_mxc_pwm(1);
+ mxc_register_device(&mxc_pwm1_backlight_device,
+ &loco_pwm_backlight_data);
}
static void __init mx53_loco_timer_init(void)
--
1.7.1
More information about the linux-arm-kernel
mailing list