[PATCH 1/1 v2] ARM: mx53_loco: Add GPIO Keypad support
Frank Li
Frank.Li at freescale.com
Tue Mar 15 04:15:15 EDT 2011
Signed-off-by: Frank Li <Frank.Li at freescale.com>
---
Replace space with tab.
use imx_add_gpio_keys
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/board-mx53_loco.c | 26 ++++++++++++++++++++++++++
2 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 83ee088..159340d 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -165,6 +165,7 @@ config MACH_MX53_LOCO
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 0a18f8d..e4c2ddf 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -23,6 +23,7 @@
#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -36,6 +37,9 @@
#include "crm_regs.h"
#include "devices-imx53.h"
+#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
+#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
+#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
static iomux_v3_cfg_t mx53_loco_pads[] = {
@@ -180,6 +184,27 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
MX53_PAD_GPIO_8__GPIO1_8,
};
+#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
+{ \
+ .gpio = gpio_num, \
+ .type = EV_KEY, \
+ .code = ev_code, \
+ .active_low = act_low, \
+ .desc = "btn " descr, \
+ .wakeup = wake, \
+}
+
+static struct gpio_keys_button loco_buttons[] = {
+ GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
+ GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
+ GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
+};
+
+static struct gpio_keys_platform_data loco_button_data = {
+ .buttons = loco_buttons,
+ .nbuttons = ARRAY_SIZE(loco_buttons),
+};
+
static inline void mx53_loco_fec_reset(void)
{
int ret;
@@ -215,6 +240,7 @@ static void __init mx53_loco_board_init(void)
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(2, NULL);
+ imx_add_gpio_keys(&loco_button_data);
}
static void __init mx53_loco_timer_init(void)
--
1.7.1
More information about the linux-arm-kernel
mailing list