[PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51
Sascha Hauer
s.hauer at pengutronix.de
Thu Mar 17 04:21:06 EDT 2011
On Wed, Mar 16, 2011 at 03:03:07PM -0500, Dinh.Nguyen at freescale.com wrote:
> +
> +struct clk *gpc_dvfs_clk;
> +
> +static int mx5_suspend_enter(suspend_state_t state)
> +{
> + if (gpc_dvfs_clk == NULL)
> + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs_clk");
clk_get can fail and NULL can be a valid clock.
Sascha
> +
> + clk_enable(gpc_dvfs_clk);
> + switch (state) {
> + case PM_SUSPEND_MEM:
> + mx5_cpu_lp_set(STOP_POWER_OFF);
> + break;
> + case PM_SUSPEND_STANDBY:
> + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (state == PM_SUSPEND_MEM) {
> + local_flush_tlb_all();
> + flush_cache_all();
> +
> + /*clear the EMPGC0/1 bits */
> + __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
> + __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
> + }
> + cpu_do_idle();
> + clk_disable(gpc_dvfs_clk);
> +
> + return 0;
> +}
> +
> +static int mx5_pm_valid(suspend_state_t state)
> +{
> + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
> +}
> +
> +static const struct platform_suspend_ops mx5_suspend_ops = {
> + .valid = mx5_pm_valid,
> + .enter = mx5_suspend_enter,
> +};
> +
> +static int __init mx5_pm_init(void)
> +{
> + if (cpu_is_mx51())
> + suspend_set_ops(&mx5_suspend_ops);
> +
> + return 0;
> +}
> +device_initcall(mx5_pm_init);
> --
> 1.6.0.4
>
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list