[PATCH] OMAP4: Intialize IVA Device in addition to DSP device.
Nishanth Menon
nm at ti.com
Thu Mar 10 08:55:44 EST 2011
Few cosmetic comments follow:
Vishwanath Sripathy wrote, on 03/10/2011 02:36 PM:
>> -----Original Message-----
>> From: linux-arm-kernel-bounces at lists.infradead.org [mailto:linux-arm-
>> kernel-bounces at lists.infradead.org] On Behalf Of Shweta Gulati
>> Sent: Thursday, March 10, 2011 11:52 AM
>> To: linux-omap at vger.kernel.org
>> Cc: Shweta Gulati; linux-arm-kernel at lists.infradead.org
>> Subject: [PATCH] OMAP4: Intialize IVA Device in addition to DSP device.
>>
>> OMAP4 has two different Devices IVA and DSP. DSP is bound
>> with MPU for DVFS and IVA has its own well defined OPPs.
> DSP is not in MPU voltage domain. DSP(Tesla) and IVAHD are in the same
> voltage domain. Pls correct this in the commit log.
True for OMAP4 - DSP and MPU DVFS are independent, in OMAP3, they were
scaled together ;)
[...]
>> This Patch adds IVA init to 'omap2_init_processor_devices'
>> and make sure that API 'omap2_set_init_voltage' is called
>> for apt dev pointer.
set_init_voltage error is just one symptom of the problem. infact, if we
wanted to do anything with iva - e.g. dvfs, we would'nt have been able
to without the device being registered.
>>
>> It fixes Error logs:
"This also fixes the following error seen during boot as
omap2_set_init_voltage can now find the iva device" is better than the
"This patch...."?
>>
>> omap2_set_init_voltage: Invalid parameters!
>> omap2_set_init_voltage: Unable to put vdd_iva to its init voltage
Thanks for catching and fixing this - I had noticed this in my SR 1.5
testing(should have posted as well), but had'nt tried to dig further.
>>
>> Tested on OMAP4430 SDP Board.
>> Baseline:
>> http://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-
>> pm.git
>> Branch :pm-core
Do you really want this information in commit log? I suggest you move
this to the diffstat section.
>>
>> Signed-off-by: Shweta Gulati<shweta.gulati at ti.com>
>> ---
>> arch/arm/mach-omap2/pm.c | 1 +
>> 1 files changed, 1 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
>> index 30af335..49486f5 100644
>> --- a/arch/arm/mach-omap2/pm.c
>> +++ b/arch/arm/mach-omap2/pm.c
>> @@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void)
>> if (cpu_is_omap44xx()) {
>> _init_omap_device("l3_main_1",&l3_dev);
>> _init_omap_device("dsp",&dsp_dev);
>> + _init_omap_device("iva",&iva_dev);
>> } else {
>> _init_omap_device("l3_main",&l3_dev);
>> }
--
Regards,
Nishanth Menon
More information about the linux-arm-kernel
mailing list