[PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board
Kukjin Kim
kgene.kim at samsung.com
Thu Mar 3 00:09:00 EST 2011
Donghwa Lee wrote:
>
> This patch enables lcd and backlight drivers in NURI board.
>
> Signed-off-by: Donghwa Lee <dh09.lee at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ------
> arch/arm/configs/exynos4_nuri_defconfig | 9 +++-
> arch/arm/mach-exynos4/Kconfig | 1 +
> arch/arm/mach-exynos4/mach-nuri.c | 62
> +++++++++++++++++++++++++++++++
> 3 files changed, 70 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/configs/exynos4_nuri_defconfig
> b/arch/arm/configs/exynos4_nuri_defconfig
> index 5f03027..e2f0bfb 100644
> --- a/arch/arm/configs/exynos4_nuri_defconfig
> +++ b/arch/arm/configs/exynos4_nuri_defconfig
> @@ -786,8 +786,13 @@ CONFIG_REGULATOR=y
> # CONFIG_DRM is not set
> # CONFIG_VGASTATE is not set
> # CONFIG_VIDEO_OUTPUT_CONTROL is not set
> -# CONFIG_FB is not set
> -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
> +CONFIG_FB=y
> +CONFIG_FB_S3C=y
> +CONFIG_LCD_CLASS_DEVICE=y
> +CONFIG_LCD_PLATFORM=y
> +CONFIG_BACKLIGHT_CLASS_DEVICE=y
> +CONFIG_BACKLIGHT_LCD_SUPPORT=y
> +CONFIG_BACKLIGHT_PWM=y
>
Hmm...where is exynos4_nuri_defconfig?
And as I said, don't add machine specific defconfig now...
I'm thinking about handling specific CONFIGs on each machine with one
defconfig.
> #
> # Display device support
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index 5bf00b9..1d0d222 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -135,6 +135,7 @@ config MACH_NURI
> select EXYNOS4_SETUP_I2C1
> select EXYNOS4_SETUP_I2C5
> select EXYNOS4_SETUP_SDHCI
> + select HAVE_PWM
Since Banajit's PWM backlight patches will be merged, should be following
your next patch.
+ select SAMSUNG_DEV_PWM
> help
> Machine support for Samsung Mobile NURI Board.
>
> diff --git a/arch/arm/mach-exynos4/mach-nuri.c
b/arch/arm/mach-exynos4/mach-
> nuri.c
> index 28010bd..d06cc91 100644
> --- a/arch/arm/mach-exynos4/mach-nuri.c
> +++ b/arch/arm/mach-exynos4/mach-nuri.c
> @@ -17,6 +17,10 @@
> #include <linux/regulator/machine.h>
> #include <linux/regulator/fixed.h>
> #include <linux/mmc/host.h>
> +#include <linux/fb.h>
> +#include <linux/pwm_backlight.h>
> +
> +#include <video/platform_lcd.h>
>
> #include <asm/mach/arch.h>
> #include <asm/mach-types.h>
> @@ -26,6 +30,8 @@
> #include <plat/cpu.h>
> #include <plat/devs.h>
> #include <plat/sdhci.h>
> +#include <plat/fb.h>
> +#include <plat/regs-fb.h>
>
> #include <mach/map.h>
>
> @@ -181,6 +187,60 @@ static struct platform_device nuri_gpio_keys = {
> },
> };
>
> +static int lcd_power_on(struct lcd_device *ld, int enable)
Should be following..."void" and "struct plat_lcd_data *" ?
static void nuri_lcd_power_on(struct plat_lcd_data *ld, int enable)
> +{
> + int gpio = EXYNOS4_GPE1(5);
> +
> + gpio_request(gpio, "LVDS_nSHDN");
> +
> + if (enable)
> + gpio_direction_output(gpio, 1);
> + else
> + gpio_direction_output(gpio, 0);
how about following?
gpio_direction_output(gpio, enable); ?
> +
> + return 0;
So no need...
> +}
> +
> +static int backlight_init(struct device *dev)
Please don't use common function name even though it is used with 'static'
> +{
Don't we need any gpio configuration for this?
> + return 0;
> +}
> +
> +/* nuri pwm backlight */
> +static struct platform_pwm_backlight_data nuri_backlight_data = {
> + .pwm_id = 0,
> + .pwm_period_ns = 30000,
> + .max_brightness = 100,
> + .dft_brightness = 50,
> + .init = backlight_init,
> +};
> +
> +static struct platform_device nuri_backlight_device = {
> + .name = "pwm-backlight",
> + .id = -1,
> + .dev = {
No need following here?
.parent = &s3c_device_timer[0].dev,
> + .platform_data = &nuri_backlight_data,
> + },
> +};
> +
> +static struct plat_lcd_data nuri_lcd_platform_data = {
> + .set_power = lcd_power_on,
> +};
> +
> +static struct platform_device nuri_lcd_device = {
> + .name = "platform-lcd",
> + .id = -1,
> + .dev = {
> + .platform_data = (void *) &nuri_lcd_platform_data,
.platform_data = &nuri_lcd_platform_data,
> + },
> +};
> +
> +static void __init nuri_fb_init(void)
> +{
> + platform_device_register(&nuri_lcd_device);
> + platform_device_register(&nuri_backlight_device);
How about to add above into nuri_devices[] instead?
> +}
> +
> /* I2C1 */
> static struct i2c_board_info i2c1_devs[] __initdata = {
> /* Gyro, To be updated */
> @@ -201,6 +261,7 @@ static struct platform_device *nuri_devices[]
__initdata
> = {
> &s3c_device_wdt,
> #endif
>
> + &s3c_device_timer[0],
> /* NURI Devices */
> &nuri_gpio_keys,
> };
> @@ -219,6 +280,7 @@ static void __init nuri_machine_init(void)
> i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
> i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
>
> + nuri_fb_init();
> /* Last */
> platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
> }
> --
> 1.6.0.4
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
More information about the linux-arm-kernel
mailing list