[PATCH 5/6] spi/pl022: Add loopback support for the SPI on 5500

[Linus Walleij]

From: Philippe Langlais <philippe.langlais at linaro.org>

Extend the vendor data with a loopback field, and add new
amba-pl022 vendor data for the DB5500 pl023, as the pl023
on db8500 and db5500 vary.

Cc: Grant Likely <grant.likely at secretlab.ca>
Signed-off-by: Prajadevi H <prajadevi.h at stericsson.com>
Signed-off-by: Philippe Langlais <philippe.langlais at linaro.org>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 drivers/spi/amba-pl022.c |   20 +++++++++++++++++++-
 1 files changed, 19 insertions(+), 1 deletions(-)

diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 95e58c7..fe79773 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -324,6 +324,7 @@ struct vendor_data {
 	bool unidir;
 	bool extended_cr;
 	bool pl023;
+	bool loopback;
 };
 
 /**
@@ -1984,7 +1985,7 @@ static int pl022_setup(struct spi_device *spi)
 
 	SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8);
 	/* Loopback is available on all versions except PL023 */
-	if (!pl022->vendor->pl023) {
+	if (pl022->vendor->loopback) {
 		if (spi->mode & SPI_LOOP)
 			tmp = LOOPBACK_ENABLED;
 		else
@@ -2228,6 +2229,7 @@ static struct vendor_data vendor_arm = {
 	.unidir = false,
 	.extended_cr = false,
 	.pl023 = false,
+	.loopback = true,
 };
 
 
@@ -2237,6 +2239,7 @@ static struct vendor_data vendor_st = {
 	.unidir = false,
 	.extended_cr = true,
 	.pl023 = false,
+	.loopback = true,
 };
 
 static struct vendor_data vendor_st_pl023 = {
@@ -2245,6 +2248,16 @@ static struct vendor_data vendor_st_pl023 = {
 	.unidir = false,
 	.extended_cr = true,
 	.pl023 = true,
+	.loopback = false,
+};
+
+static struct vendor_data vendor_db5500_pl023 = {
+	.fifodepth = 32,
+	.max_bpw = 32,
+	.unidir = false,
+	.extended_cr = true,
+	.pl023 = true,
+	.loopback = true,
 };
 
 static struct amba_id pl022_ids[] = {
@@ -2278,6 +2291,11 @@ static struct amba_id pl022_ids[] = {
 		.mask   = 0xffffffff,
 		.data   = &vendor_st_pl023,
 	},
+	{
+		.id	= 0x10080023,
+		.mask	= 0xffffffff,
+		.data	= &vendor_db5500_pl023,
+	},
 	{ 0, 0 },
 };
 
-- 
1.7.3.2