[patch v3 1/3] arm: introduce cross trigger interface helpers
tom.leiming at gmail.com
tom.leiming at gmail.com
Thu Mar 3 05:53:51 EST 2011
From: Ming Lei <tom.leiming at gmail.com>
OMAP4 uses cross trigger interface(CTI) to route
performance monitor irq to GIC, so introduce cti
helpers to make access for cti easily.
Signed-off-by: Ming Lei <tom.leiming at gmail.com>
---
arch/arm/include/asm/cti.h | 177 ++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 177 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/cti.h
diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h
new file mode 100644
index 0000000..48f173a
--- /dev/null
+++ b/arch/arm/include/asm/cti.h
@@ -0,0 +1,177 @@
+/*
+ * arch/arm/include/asm/cti.h
+ */
+#ifndef __ASMARM_CTI_H
+#define __ASMARM_CTI_H
+
+#include <asm/io.h>
+
+/*The registers' definition is from section 3.2 of
+ * Embedded Cross Trigger Revision: r0p0
+ **/
+#define CTICONTROL 0x000
+#define CTISTATUS 0x004
+#define CTILOCK 0x008
+#define CTIPROTECTION 0x00C
+#define CTIINTACK 0x010
+#define CTIAPPSET 0x014
+#define CTIAPPCLEAR 0x018
+#define CTIAPPPULSE 0x01c
+#define CTIINEN 0x020
+#define CTIOUTEN 0x0A0
+#define CTITRIGINSTATUS 0x130
+#define CTITRIGOUTSTATUS 0x134
+#define CTICHINSTATUS 0x138
+#define CTICHOUTSTATUS 0x13c
+#define CTIPERIPHID0 0xFE0
+#define CTIPERIPHID1 0xFE4
+#define CTIPERIPHID2 0xFE8
+#define CTIPERIPHID3 0xFEC
+#define CTIPCELLID0 0xFF0
+#define CTIPCELLID1 0xFF4
+#define CTIPCELLID2 0xFF8
+#define CTIPCELLID3 0xFFC
+
+/*The two below are from section 3.6.4 of
+ * CoreSight v1.0 Architecture Specification
+ **/
+#define LOCKACCESS 0xFB0
+#define LOCKSTATUS 0xFB4
+
+/**
+ * struct cti - cross trigger interface struct
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out_for_irq: triger out number which will cause
+ * the @irq happen
+ *
+ * cti struct used to operate cti registers.
+ */
+struct cti {
+ void *base;
+ int irq;
+ int trig_out_for_irq;
+};
+
+/**
+ * cti_init - initialize the cti instance
+ * @cti: cti instance
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out: triger out number which will cause
+ * the @irq happen
+ *
+ * called by machine code to pass the board dependent
+ * @base, @irq and @trig_out to cti.
+ */
+static inline void cti_init(struct cti *cti,
+ void *base, int irq, int trig_out)
+{
+ cti->base = base;
+ cti->irq = irq;
+ cti->trig_out_for_irq = trig_out;
+}
+
+/**
+ * cti_map_trigger - use the @chan to map @trig_in to @trig_out
+ * @cti: cti instance
+ * @trig_in: trigger in number
+ * @trig_out: trigger out number
+ * @channel: channel number
+ *
+ * This function maps one trigger in of @trig_in to one trigger
+ * out of @trig_out using the channel @chan.
+ */
+static inline void cti_map_trigger(struct cti *cti,
+ int trig_in, int trig_out, int chan)
+{
+ void *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + CTIINEN + trig_in * 4);
+ val |= 1 << chan;
+ __raw_writel(val, base + CTIINEN + trig_in * 4);
+
+ val = __raw_readl(base + CTIOUTEN + trig_out * 4);
+ val |= 1 << chan;
+ __raw_writel(val, base + CTIOUTEN + trig_out * 4);
+}
+
+/**
+ * cti_enable - enable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_enable(struct cti *cti)
+{
+ __raw_writel(0x1, cti->base);
+}
+
+/**
+ * cti_disable - disable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_disable(struct cti *cti)
+{
+ __raw_writel(0, cti->base);
+}
+
+/**
+ * cti_irq_ack - clear the cti irq
+ * @cti: cti instance
+ *
+ * clear the cti irq
+ */
+static inline void cti_irq_ack(struct cti *cti)
+{
+ void *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + CTIINTACK);
+ val |= 1 << cti->trig_out_for_irq;
+ __raw_writel(val, base + CTIINTACK);
+}
+
+/**
+ * cti_unlock - unlock cti module
+ * @cti: cti instance
+ *
+ * unlock the cti module, or else any writes to the cti
+ * module is not allowed.
+ */
+static inline void cti_unlock(struct cti *cti)
+{
+ void *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + LOCKSTATUS);
+
+ if (val & 1) {
+ val = 0xC5ACCE55;
+ __raw_writel(val, base + LOCKACCESS);
+ }
+}
+
+/**
+ * cti_lock - lock cti module
+ * @cti: cti instance
+ *
+ * lock the cti module, so any writes to the cti
+ * module will be not allowed.
+ */
+static inline void cti_lock(struct cti *cti)
+{
+ void *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + LOCKSTATUS);
+
+ if (!(val & 1)) {
+ val = ~0xC5ACCE55;
+ __raw_writel(val, base + LOCKACCESS);
+ }
+}
+#endif
--
1.7.3
More information about the linux-arm-kernel
mailing list